JBC Tools NASE-1C Nano Rework Station is the best solution to repair very small-sized components at high precision such as chips 0402, 0201, 01005, etc. Can be Purchased in 120 or 230 volts.
JBC Tools NASE-1C Nano Rework Station
The NASE-1C JBC Tools Nano Rework Station works simultaneously with the NT115-A Nano Handpiece and the AN115 Steady Nano Tweezers.
NASE-1C JBC Tools Nano Rework Station
The NASE-1C Nano Rework Station TFT Screen (Thin Film Transistor) and Capacitive Keyboard Control unit featuring digital read-out that allows precise temperature and tool control. The JBC Tools NASE-1C incorporates the JBC Tools Exclusive Heating System and the intelligent Seep and Hibernation features. Using the JBC Tools NASE-1C menu you can personalize over 20 parameters to help manage the soldering process. It works simultaneously with NT115-A Nano Soldering Iron and NP115-A Nano Tweezers. The short distance between the tip and the handle offers maximum control even using a microscope.
JBC Tools NASE-1C Nano Rework Station Includes
Control Unit: NAE-1C with tip cleaning system
Tools: NT115-A Nano Soldering Handpiece and AN115-A Steady Nano Tweezers
Cartridges Included: C115101 x1 - C115103 x1 - C115105 x2 - C115107 x1 - C115112 x1 - C115113 x2.
Optional Accessories: 0016079 Sleeves for NP115, A1205 Extension Lead for Nano Stations, P-005 Pedal
JBC Tools NASE-1C Nano Rework Station Specifications
Weight 1.8 kg (9.0 lb)
Dimensions 170 x 90 x 135 mm
Voltage 120V / 230V / 100V
Input Fuse 0.5A / 0.2A / 0.5A
Output Peak Power 14W per tool
Temperature selection 90-450 ºC (190-840 ºF)
Idle temp. stability (still air) ±3 ºC (±5.5 ºF)
Tip to ground resistance <2 ohms
Ambient operating temp. 10-40 ºC (50-104 ºF)
Communication connectors USB-A / USB-B / Pedal
Robot connector RJ12 for RS-232 protocol
Package weight 2.25 kg (4.96 lb)
Package dimensions 276 x 276 x136 mm
Purchase a JBC Tools NASE-1C Nano Rework Station sold by Howard Electronics Today!
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, MG Chemicals, Pana Vise, Qualitek, Steinel, Scienscope, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.
No posts found