Soldering Accessories

Soldering Accessories sold by Howard Electronics.

Accessories and tools for your soldering equipment including SMD solder removal kits, helping hands, magnifiers, smoke absorbers, and much more at low prices. We have solder by Qualitek, Solder Paste and flux by Chip Quik and Qualitek. Tip Tinner by JBC Tools and other items by Xytronic, Edsyn and JBC Tools.

Purchase Soldering Accessories today from Howard Electronics.

$8,640.00 $7,776.00
HA245 Soldering Unit for General Soldering makes the first selective soldering solution featuring Automatic Cartridge Exchange available to the electronic...
+

$8,640.00 $7,776.00
HA470 Soldering Unit for Heavy Duty Soldering makes the first selective soldering solution featuring Automatic Cartridge Exchange available to the...
+

$4,565.00 $4,108.50
The PHBE is the best solution for preheating big multilayer PCBAs, and it works with convection technology. It allows gradual heating up, reducing...
+

$4,255.00 $3,829.50
The FAE is the most efficient solution to avoid exposure to solder fumes. It optimizes fume extraction operating only when needed. The extractor...
+

$3,225.00 $2,902.50
For Automated Processes and Standard Soldering Purposes, This Cartridge Stand is designed to be used in combination with the new Cartridges R245....
+

$3,225.00 $2,902.50
For Automated Processes and Heavy Duty Purposes. This Cartridge Stand is designed to be used in combination with the new Cartridges R470. The...
+

$3,125.00 $2,812.50
The GN-A supplies nitrogen to the T210-NA, T245-NA or the T470-NA Nitrogen Handle. It provides extra heat and helps to prevent tip oxidation. This...
+

$1,600.00
Outline This pre-heater uses 400W IR or 2×200W IR heaters and closed - loop control to enable fast and safety manual soldering. It is designed for...
+

$1,600.00 $1,440.00
23.0 Lbs.

JBC Tools Smart Fume Extractor only runs when needed.

+

$1,220.00 $1,098.00
This is the ideal solution for improving the quality of any solder joint by using nitrogen as it provides extra heat and helps prevent tip oxidation....
+

$1,140.00 $1,026.00
This is the ideal solution for improving the quality of any solder joint by using nitrogen as it provides extra heat and helps prevent tip oxidation....
+

$1,025.00 $922.50
Nitrogen improves the quality of any solder joint as it provides extra heat and helps prevent tip oxidation. The MNE-A regulates nitrogen flow to the...
+

$779.00
4 x 50 foot ESD Mat 2mm/0.079" thick, Light Blue. Specifications Size: 48 inches x 50 feet (4 x 50 feet) -0/+2% Thickness: 0.079" (2mm) Color: Light...
+

$860.00 $774.00
Nitrogen improves the quality of any solder joint as it provides extra heat and helps prevent tip oxidation. The MN-A regulates nitrogen flow to the...
+

$730.00 $657.00
For Automated Processes. It features a large capacity tank with easy extraction and a large opening for easy tip access. The CLMR can be rotated up...
+

$655.00 $589.50

JBC Tools TID-A Digital Thermometer is a high precision thermometer that provides quick response readings of soldering tip temperature.

+

$559.00
2.5 x 50 foot ESD Mat 2mm/0.079" thick, Light Blue. Specifications Size: 30 inches x 50 feet (2.5 x 50 feet) -0/+2% Thickness: 0.079" (2mm)...
+

$620.00 $558.00
Less than 1 second to perform a through and gentle tip cleaning with CLMU, increasing heat transfer to maximize soldering quality. It features Sensor...
+

$565.00 $508.50
Indispensable for using the AL system while having both hands free. For this purpose it is also necessary to use the pedal set Ref:0964551
+

$574.35 $486.77

EDSYN OPT825 SMT HOT AIR CONVERSION KIT

+

$459.00
2 x 50 foot ESD Mat 2mm/0.079" thick, Light Blue. Specifications Size: 24 inches x 50 feet (2 x 50 feet) -0/+2% Thickness: 0.079" (2mm) Color:...
+

$490.00 $441.00

TIA-A JBC Tools Thermometer for Soldering Iron Calibration

+

$465.00 $418.50
JBC Fume Extractor FAE2-5A features a compact three-layered filter This replacement for Compact Filter includes Hepa Filter, Carbon Filter and...
+

$460.00 $414.00
C105 Cartridge Range will be discontinued and replaced by C115. Nano Updating Kit allows you to use your NAS Station (A/B version) with C115 Cartridge...
+

$440.00 $396.00
JBC Fume Extractor FAE1 features a compact three-layered filter This replacement for Compact Filter includes Hepa Filter, Carbon Filter and...
+

$410.00 $369.00
The JT-T2A Heater Hose Set works with the JTSE-2A Hot Air Station, including the JTSE-2QA model. It allows you to repair all types of SMD electronic...
+

$390.00 $351.00
This foot switch makes the tool enter sleep or hibernation modes, causing no thermal stress when the component is placed on the PCB. Ideal for working...
+

$360.00 $324.00
The foot switch makes the tool enter sleep or hibernation modes, causing no thermal stress when the component is placed on the PCB. Ideal for working...
+

$350.00 $315.00
The Sleep & Hibernation modes automatically reduce the tip temperature when the tool is in the stand. As a result, a tip`s life lasts up to 5 times...
+

$325.00 $292.50
C105 Cartridge Range will be discontinued and replaced by C115. Nano Updating Kit allows you to use your NAN Station (A/B version) with C115 Cartridge...
+

$341.01 $289.00
XY-001 Xytronic Bench-Top Ionizing Air Blower
+

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 0.5 - 0.6 mm. This Guide Kit suits for the SFR Solder Feeder and...
+

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 0.7 - 0.8 mm. This Guide Kit suits for the SFR SolderFeeder and...
+

$310.00 $279.00
With solder wire perforation. It is compatible with solder wire diameter ø 0.8 mm. This Guide Kit suits for the SFR Solder Feeder and its...
+

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 0.9 - 1.0 mm. This Guide Kit suits for the SFR Solder...
+

$310.00 $279.00
With solder wire perforation. It is compatible with solder wire diameter ø 1.0 mm. This Guide Kit suits for the SFR Solder Feeder and its...
+

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 1.2 - 1.5 mm. This Guide Kit suits for the SFR Solder Feeder and...
+

$310.00 $279.00
With solder wire perforation. It is compatible with solder wire diameter ø 1.5 mm. This Guide Kit suits for the SFR Solder Feeder and its...
+

$280.00 $252.00
This foot switch makes the tool enter sleep or hibernation modes, causing no thermal stress when the component is placed on the PCB. Ideal for working...
+

$270.00 $243.00
HRL Left Hand Support allows adjustment for different positions according to your work needs. An indispensable tool for precision work which provides a...
+

$270.00 $243.00
HRR Right Hand Support allows adjustment for different positions according to your work needs. An indispensable tool for precision work which provides...
+

$265.00 $238.50
Completely flexible arm to be adjusted to your workbench. It features a clamp to fix it in place. The Fume Extractor FAE2-5B regulates the airflow...
+

$255.00 $229.50
The sleep & hibernation mode automatically reduces the tip temperature when the tool is in the stand. As a result, a tip`s life lasts up to 5 times longer....
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 0.7 - 0.8 mm solder wires. You can easily change the guide set depending on the solder...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 1.0 mm single-core solder wires. With a small blade that perforates the solder wire...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 0.8 mm single-core solder wires. With a small blade that perforates the solder wire down...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 1.2 - 1.5 mm solder wires. You can easily change the guide set depending on the solder...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 1.5 mm single-core solder wires. With a small blade that perforates the solder wire down...
+

$240.00 $216.00
It can be used for all the senior soldering irons range, the straight ones as well as the hammers-shapes ones. Fitted with a sponge and a wire brush...
+

$240.00 $216.00
High emissivity tape provides greater absorption of infrared for a faster and more uniform preheating of PCBs with metal substrates. 10x faster with...
+

$233.00 $209.70
Guide tube for the AL250 Auto-Feed Iron. Size Ø 1,6 - 1,8 mm.
+

$200.00 $180.00
It perfectly holds the JT-TA tools when not in use. Its adjustable tool holder suits your work position and the quick nozzle changer allows to...
+

$200.00 $180.00
T210N Nitrogen Precision Handle allows you to create an inert atmosphere, removing the oxygen, and hence minimizing oxidization during solder joint...
+

$195.00 $175.50
The Sleep & Hibernation modes automatically reduce the tip temperature when the tool is in the stand. As a result, a tip`s life lasts up to 5 times...
+

$195.00 $175.50
The Sleep & Hibernation modes automatically reduce the tip temperature when the tool is in the stand. As a result, a tip`s life lasts up to 5 times...
+

$186.00 $167.40
Guide tube for the AL250 Auto-Feed Iron. Size Ø 1,1 - 1,5 mm
+

$157.00
Co-Solvent High Evaporating (Non-Flammable) Rinse Agent Specifications Boiling Point: 55C Flash Point: None Vapor Pressure: 27.5kPa Heat of...
+

$168.00 $151.20
Guide tube for the AL250 Auto-Feed Iron. Size Ø 0,4 - 0,5 mm.
+

$168.00 $151.20
Guide tube for the AL250 Auto-Feed Iron. Size Ø 0,9 - 1 mm.
+

$168.00 $151.20
Guide tube for the AL250 Auto-Feed Iron. Size Ø 0,6- 0,8 mm.
+

$176.87 $149.95
Xytronic 191Soldering Iron Thermometer
+

$150.00 $135.00

T260-A Pick & Place Tools by JBC Tools

+

$133.00 $119.70

JBC Tools STD-A Replacement Sensor for TID-A Digital Thermometer with Type K Thermocouple reads the temperature of the soldering tip.

+

$130.00 $117.00
The Solder Reel Stand is the ideal solution for easy solder wire supply. It can be placed in two positions to suit your working needs. It comes with a...
+

$126.00 $113.40

JBC CLMB-A8 Metal Brushes for CLMB-A

+

$126.00 $113.40
These brushes work with the CLMB-A Senior Tip Cleaner. They are activated when the user insert the tip into the window of the Tip Cleaner. The...
+

$126.00 $113.40
These brushes work with the CLMB-PA Senior Tip Cleaner non-metal. They are activated when the user insert the tip into the window of the Tip Cleaner....
+

$126.00 $113.40
These brushes work with the CLMB-PA Senior Tip Cleaner non-metal. They are activated when the user insert the tip into the window of the Tip Cleaner....
+

$113.00 $101.70
Aspiration for up to 4 stands + clamp to fix it in place. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique...
+

$105.00 $94.50
CL8499, JBC Tools

CL8499 JBC Tip Cleaning System

+

$125.00 $90.00

Qualitek NC600-LF96530-010 Qualitek NC Wire SAC 305, .010 1.1% 1lb.

+

$100.00 $90.00
Replacement filter for DS360 Microdesoldering Iron. Packaging contains 5 filters.
+

$87.55
PRODUCT HIGHLIGHTS - No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core...
+

$97.00 $87.30
The fume extractor for AL250 is an easy & safe solution to suck the fume generated at the solder joint. It is supplied with all necessary pieces to...
+

$93.00 $83.70

A1287 0781287 JBC Desoldering Iron Cable Extension Kit

+

$93.00 $83.70

JBC F6457 Fume Extractor accessory for T245-C Comfort Handpieces

+

$93.00 $83.70

FL-50 FL9582-500 JBC Water Based Flux 500 ml.

+

$82.16
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$79.00
2 x 4 foot ESD Mat 2mm/0.079" thick, Light Blue, 2 buttons, wrist strap, ground cord. Specifications Size: 24 inches x 48 inches (2 x 4 feet)...
+

$85.00 $76.50
The ESD safe Kapton Tape allows you to fix the Thermocouples on the PCB. Polyimide film coated with a special surface conductive adhesive. Leaves no...
+

$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Lead-Free SAC305 in 500g jar. Revolutionary Formula: No Refrigeration Required! Alloy:...
+

$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble Lead-Free SAC305 in 500g jar. Revolutionary Formula: No Refrigeration Required!...
+

$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble (T4) Sn42/Bi57.6/Ag0.4 Low Temperature 90% metal melts @ 138C, 281F Water-Soluble in...
+

$80.00 $72.00
Aspiration system for Modular Stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated into the...
+

$80.00 $72.00
Aspiration system for Compact Stations Stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated...
+

$75.95 $70.49
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Lead-Free SAC305 in 500g jar. Revolutionary Formula: No Refrigeration Required! Alloy:...
+

$74.95 $69.99
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Sn/Pb in 500g jar. Revolutionary Formula: No Refrigeration Required! Alloy: Sn63/Pb37...
+

$74.95 $69.99
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble Sn/Pb in 500g jar. Revolutionary Formula: No Refrigeration Required! Specifications...
+

$75.00 $67.50
Rectangular nozzle for ambient fume extraction. You can easily attach the nozzle to FAE020 and FAE070 Flexible Arms. Arms not included.
+

$75.00 $67.50
Round nozzle for ambient fume extraction. You can easily attach the nozzle to FAE020 and FAE070 Flexible Arms. Arms not included.
+

$75.00 $67.50
Rectangular nozzle for ambient fume extraction. You can easily attach the nozzle to FAE020 and FAE070 Flexible Arms. Arms not included.
+

$73.00 $65.70
Extend the distance from the Control Unit to the tool by 1m.
+

$65.31
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$69.00 $62.10

JBC F3435 3435 Fume Extractor accessory for T245 handpiece 6mm

+

$69.00 $62.10

JBC F3449 3449 Fume Extractor accessory for T245 handpiece 4mm

+

$69.00 $62.10

JBC F3450 3450 Fume Extractor accessory for 2210 handpiece

+
Product filters Product filters