Soldering

Soldering Stations sold by HEI

Howard Electronic Instruments is a worldwide distributor of soldering stations, soldering tools, and soldering irons by Xytronic, JBC Tools, Jovy, Atten, DEN-ON Instruments, EDSYN, and Goot manufactures. We also have all soldering tips, soldering handpieces, soldering stands, soldering parts, soldering pots, soldering fume extractors, butane soldering irons, and soldering accessories for all the soldering stations we sell.

$1,600.00
Outline This pre-heater uses 400W IR or 2×200W IR heaters and closed - loop control to enable fast and safety manual soldering. It is designed for...
+

$730.00 $657.00

DI-1D JBC Tools Single Digital Station that allows the connection of 1 tool.


$1,500.00 $1,350.00

BC Tools DME-1A Control Unit manages up to 4 tools simultaneously. DME-1A Control Unit offers full connectivity to any JBC Tools Soldering or Desoldering tools.

+

$1,500.00 $1,350.00

DME-2A, JBC Tools Quad Soldering Station

+

$4,285.00 $3,856.50
The DME manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools....
+

$3,360.00 $3,024.00
The DME manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below for the complete list of compatible tools....
+

$255.00 $229.50
The sleep & hibernation mode automatically reduces the tip temperature when the tool is in the stand. As a result, a tip`s life lasts up to 5 times longer....
+

$60.00 $54.00
Ergonomic solder paste dispenser ideal for SMT rework. See needle range for the highest dispensing precision. (Solder paste and needle not...
+

$280.00 $252.00
DR-SD, JBC Tools

DR-SF JBC Stand for DR-A Desoldering Iron

+

$650.00 $585.00

DR560-A JBC Tools Desoldering Iron for MS-A and MV-A

+

$280.00 $252.00
DS-SD, JBC Tools

DS-SF JBC Stand for DS-A Micro Desoldering? Iron

+

$650.00 $585.00

DS360-A JBC Micro Desoldering Wand for MS-A and MV-A

+



$200.00
951SXTP, Edsyn

EDSYN 951SX Soldering Station,Mini Flow Soldering Tip & Chip Quik SMD1




$4.78 $4.30

AC735 HEAT ACCUMULATOR INSERT

+

$70.20 $56.00

EDSYN CH12 HAMMER TIP

+

$70.20 $56.00

EDSYN CH17 HAMMER TIP

+

$221.50

EDSYN CL1080 SOLDERING PENCIL

+

$108.90 $99.00
5.5"W x 12"H x 5.5"D(140 mm x 305 mm x 140 mm), Edsyn

EDSYN FXF11 FUME EXTRACTOR

+

$140.30

EDSYN FXF12 FUME EXTRACTOR FAN WITH SH232 TRAY

+

$5.16 $4.50
EDSYN HP429 LONER SOLDER TIP
+

$15.87 $13.50
EDSYN HP444 SPADE SOLDER TIP
+

$9.37 $8.02
EDSYN HT01 REPLACEMENT TUBE
+

$15.87 $13.00

EDSYN LT224BC LONER HEAVY DUTY SPADE SOLDERING TIP

+

$20.46 $17.50
EDSYN LT336A HD TIP THREADED
+

$8.80 $7.50

EDSYN LT371LF FINE SPADE TIP

+

$9.50 $8.50

EDSYN LT374LF STANDARD PROBE TIP

+

$7.27 $6.50

EDSYN LT375 STANDARD SPADE TIP

+

$7.65 $7.20

EDSYN LT387LF STD. ANGLE FACE SODERING TIP

+

$6.60 $6.30

EDSYN LT393LF Replacement Spade Soldering Tip

+

$9.20 $7.50

EDSYN LT394 EXTRA LONG SPADE TIP

+

$7.60 $7.50

EDSYN LT395 MIDLENGTH STUBBY TIP

+

$6.90

EDSYN LT396LF MINI-WAVE TIP

+

$8.80 $7.50

EDSYN LT399 ANGLE FACE TIP

+

$9.95 $8.50

EDSYN LT425LF EXTRA LONG FINE TIP

+

$8.80 $7.50
EDSYN LT429 MIDLENGTH NEEDLE TIP
+

$8.80 $7.50
EDSYN LT430 MIDLENGTH ANGLE FACE
+

$8.80 $7.50
EDSYN LT431 MIDLENGTH SPADE TIP
+

$29.45 $25.03
EDSYN LT434 SMD HOT AIR MEDIUM FAN TIP
+

$55.10 $42.40
EDSYN LT436 HOT AIR FAN TIP
+

$8.60 $7.50

EDSYN LT439 CONICAL NEEDLE TIP

+

$9.00 $7.50
EDSYN LT439-1 LONER ANGLED CONICAL TIP
+

$15.68 $13.30
EDSYN LT441BC HEAVY DUTY SPADE
+

$8.80 $8.20
EDSYN LT444 MID-LENGTH FINE TIP
+

$8.80 $7.50
EDSYN LT444-1 ANGLED SPADE SOLDERING TIP
+

$11.09 $9.50

EDSYN LT446LF SMD PROBE TIP LEAD FREE

+

$113.99 $96.75
EDSYN LT447 QUADRA-FLOW HOT AIR TIP
+

$113.99 $96.75
EDSYN LT449 QUADRA-FLOW HOT AIR TIP
+

$113.99 $96.75
EDSYN LT458 QUADRA FLOW HOT AIR TIP
+

$113.99 $96.75
EDSYN LT460 QUADRA-FLOW HOT AIR TIP
+

$30.41 $25.80
EDSYN LT510 HOT AIR TIP .06" HOLE .65"LONG
+

$30.41 $25.80
EDSYN LT511 LONER BENT HOT AIR TIP
+

$30.41 $25.80
EDSYN LT512 CURL BENT HOT AIR TIP .07".90"
+

$34.04 $29.00
EDSYN LT535 SMD HOT AIR TIP
+

$18.93 $16.10
EDSYN LT570BC HEAVY DUTY SMD KNIFE
+

$8.99 $7.70
Edsyn LT602-1 Angled Conical Soldering Tip
+

$14.15 $12.15
EDSYN LT771 ANGLE CUP SOLDERING TIP .06 IN
+

$574.35 $486.77

EDSYN OPT825 SMT HOT AIR CONVERSION KIT

+

$11.48 $9.80

EDSYN PA233 DOVETAIL EXTENSION ASSEMBLY

+

$5.93 $5.10

EDSYN PA233-1 SINGLE EXTENSION ASSEMBLY

+

$28.50
EDSYN PD528 TOOL POD FOR ALL SOLDER STATION
+

$6.12 $5.30

EDSYN RC306 RETAINING COLLET

+

$29.45 $25.03
EDSYN RCS71 RETAINING SLEEVE & COLLAR
+

$2.20 $2.00

EDSYN RS199 SPONGE FOR SH230

+

$22.19 $20.30

EDSYN RS372 RETAINING SLEEVE

+

$20.80

EDSYN RS383 RETAINING SLEEVE

+

$16.30

EDSYN SH230 SPONGE HOLDER

+

$12.00

EDSYN SR057 Soldering Handle

+

$68.60

EDSYN SR574 Hollow Heater

+

$12.99 $11.99
EDSYN XF01 Fuminator Filter Set (Primary and Secondary)
+

$23.59 $21.89
EDSYN XF02 Fuminator Primary Rotating Filter (Set of 5)
+

$34.00 $31.59
EDSYN XF03 Charcoal Impregnated Stationary Filter (Set of five)
+

$69.00 $62.10

JBC F3449 3449 Fume Extractor accessory for T245 handpiece 4mm

+

$69.00 $62.10

JBC F3450 3450 Fume Extractor accessory for 2210 handpiece

+

$97.00 $87.30
The fume extractor for AL250 is an easy & safe solution to suck the fume generated at the solder joint. It is supplied with all necessary pieces to...
+

$180.00 $162.00
FAE020 50 mm Flexible Arm for JBC Tools FAE1-1B Fume Extractor
+

$37.00 $33.30
Aspiration for up to 4 stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated into the stand....
+

$113.00 $101.70
Aspiration for up to 4 stands + clamp to fix it in place. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique...
+

$80.00 $72.00
Aspiration system for Modular Stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated into the...
+

$80.00 $72.00
Aspiration system for Compact Stations Stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated...
+

$265.00 $238.50
Completely flexible arm to be adjusted to your workbench. It features a clamp to fix it in place. The Fume Extractor FAE2-5B regulates the airflow...
+

$75.00 $67.50
Rectangular nozzle for ambient fume extraction. You can easily attach the nozzle to FAE020 and FAE070 Flexible Arms. Arms not included.
+

$75.00 $67.50
Round nozzle for ambient fume extraction. You can easily attach the nozzle to FAE020 and FAE070 Flexible Arms. Arms not included.
+

$440.00 $396.00
JBC Fume Extractor FAE1 features a compact three-layered filter This replacement for Compact Filter includes Hepa Filter, Carbon Filter and...
+

$33.00 $29.70
Replacement for pre-filter. JBC Fume Extractor FAE1 features a compact three-layered filter The combination of the three-layered filter system...
+

$1,600.00 $1,440.00
23.0 Lbs.

JBC Tools Smart Fume Extractor only runs when needed.

+

$465.00 $418.50
JBC Fume Extractor FAE2-5A features a compact three-layered filter This replacement for Compact Filter includes Hepa Filter, Carbon Filter and...
+

$33.00 $29.70
Replacement for pre-filter. JBC Fume Extractor FAE2-5A features a compact three-layered filter The combination of the three-layered filter system...
+

$4,255.00 $3,829.50
The FAE is the most efficient solution to avoid exposure to solder fumes. It optimizes fume extraction operating only when needed. The extractor...
+

$5.00 $4.50

FL-15 FL9582-15 JBC Water Based Flux 15ml.

+

$93.00 $83.70

FL-50 FL9582-500 JBC Water Based Flux 500 ml.

+

$13.00 $11.70
FL-A is a flux brush designed to be used in the preparation of printed circuits prior to soldering an SMD component, especially flat pack integrated...
+

$3,125.00 $2,812.50
The GN-A supplies nitrogen to the T210-NA, T245-NA or the T470-NA Nitrogen Handle. It provides extra heat and helps to prevent tip oxidation. This...
+
Product filters Product filters