JBC Tools DDE-1C Control Unit manages up to 2 tools simultaneously. DDE-1B Control Unit offers full connectivity to any JBC Tools Soldering or Desoldering tools.
JBC Tools DDE-1C Soldering Control Unit
The JBC Tools DDE-1C Control Unit offers full connectivity to any of JBC Tools in order to set up your personalized station. The JBC Tools DDE-1C control unit works with the JBC Exclusive Heating System and the intelligent sleep & hibernation features to extend a tip´s life up to 5 times longer.
DDE-1C JBC Tools Control Unit
Using the JBC Tools DDE-1C menu you can personalize over 20 parameters to help manage the soldering process. The USB connector allows to update software, create graphs and manage parameters from a PC. For a basic working system, you need at least 1 stand, 1 tool and 1 cartridge. See the full cartridge range.
JBC Tools DDE-1C Control Unit Specifications
Weight 4.3 kg (9.3 lb)
Dimensions 148 x 120 x 232 mm
Voltage(AC) 120V / 230V / 100V
Input fuse 4A / 2A / 5A
Output peak power 150W per tool
Temperature selection 90-450 ºC (190-840 ºF)
Idle temp. stability (still air) ±1.5 ºC (±3 ºF)
Tip to ground resistance <2 ohms
Tip to ground voltage <2 mV RMS
Ambient operating temp. 10-40 ºC (50-104 ºF)
Communication connectors USB-A / USB-B / Peripherals
Robot connector RJ12 for RS-232 protocol
Package weight 4.6 kg (9 lb)
Package dimensions 280 x 205 x 210 mm
Purchase a JBC Tools DDE-1C Control Unit sold by Howard Electronics Today!
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, MG Chemicals, Pana Vise, Qualitek, Steinel, Scienscope, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.
No posts found