Soldering Accessories

Soldering Accessories sold by Howard Electronics.

Accessories and tools for your soldering equipment including SMD solder removal kits, helping hands, magnifiers, smoke absorbers, and much more at low prices. We have solder by Qualitek, Solder Paste and flux by Chip Quik and Qualitek. Tip Tinner by JBC Tools and other items by Xytronic, Edsyn and JBC Tools.

Purchase Soldering Accessories today from Howard Electronics.

$3.30 $2.97
Box with cotton filter replacements for MSE Electric Desoldering Module and MVE Pneumatic Desoldering Module. Packaging contains 10 filters.
+

$24.00 $20.70
Tweezers for general use in electronics
+

$24.00 $20.70
Very fine-tipped Tweezers
+

$24.00 $20.70
Ultra fine-tipped Tweezers for miniature jobs
+

$130.00 $117.00
The Solder Reel Stand is the ideal solution for easy solder wire supply. It can be placed in two positions to suit your working needs. It comes with a...
+

$57.00 $51.30
To save space handles can be directly connected to JBC`s stations and control units with the CHB-A converter.
+

$27.00 $24.30
For more indepth cleaning of the NP105 and NT105 Supplied in boxes of 2 units
+

$113.00 $101.70
Aspiration for up to 4 stands + clamp to fix it in place. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique...
+

$80.00 $72.00
Aspiration system for Modular Stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated into the...
+

$265.00 $238.50
Completely flexible arm to be adjusted to your workbench. It features a clamp to fix it in place. The Fume Extractor FAE2-5B regulates the airflow...
+

$13.00 $11.70
FL-A is a flux brush designed to be used in the preparation of printed circuits prior to soldering an SMD component, especially flat pack integrated...
+

$12.00 $10.80
Set consisting of several solder paste dispensing needles with different gauge, from gauge 18 to gauge 30, recommended for solder paste Type 2, 3, 4, 5...
+

$390.00 $351.00
This foot switch makes the tool enter sleep or hibernation modes, causing no thermal stress when the component is placed on the PCB. Ideal for working...
+

$66.00 $59.40
This foot switch makes the tool enter hibernation mode, causing no thermal stress when the component is placed on the PCB. Ideal for working with...
+

$68.00 $61.20
The Thermocouple Type K reads the temperature on a specific point of the PCB. It helps you manage the temperature profiles when used with the...
+

$4,565.00 $4,108.50
The PHBE is the best solution for preheating big multilayer PCBAs, and it works with convection technology. It allows gradual heating up, reducing...
+

$41.00 $36.90
Tweezer nosed pliers with ESD safe hand grips for precision jobs. An ultra-precise needlenosed pliers capable of grasping and holding wire less...
+

$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble (T4) Sn42/Bi57.6/Ag0.4 Low Temperature 90% metal melts @ 138C, 281F Water-Soluble in...
+

$1.99 $1.85
5 ft of 1.5mm solder wick desoldering braid- No Clean
+

$9.95
No-Clean Tack Flux. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Very low viscosity synthetic paste flux. More...
+

$14.95
No-Clean Tack Flux. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Very low viscosity synthetic paste flux. More...
+

$29.95
Co-Solvent Low Evaporating Flux Remover Specifications Boiling Point: 175-215C Flash Point: 77C Vapor Pressure: 0.1kPa Liquid Density:...
+

$8.95
Liquid Flux Alcohol-Based No-Clean Water-Washable in 6ml (0.2oz) Refillable Pen with tip and brush Specifications Flux Type: No-Clean Water-Washable...
+

$7.95
Water-Soluble Tacky Flux for Stained Glass Soldering. Low viscosity. Specifications Flux Type: Synthetic Water-Soluble for Stained Glass...
+

$4.60
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$65.31
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$59.99 $53.60
- Extruded High Reliability Solder Bar - Manufactured Specifically for High Quality Electronics Manufacturing (EMS, ECM, OEMs) - Designed for...
+

$490.00 $441.00

TIA-A JBC Tools Thermometer for Soldering Iron Calibration

+

$69.00 $62.10

JBC F3449 3449 Fume Extractor accessory for T245 handpiece 4mm

+

$97.00 $87.30
The fume extractor for AL250 is an easy & safe solution to suck the fume generated at the solder joint. It is supplied with all necessary pieces to...
+

$93.00 $83.70

JBC F6457 Fume Extractor accessory for T245-C Comfort Handpieces

+

$574.35 $486.77

EDSYN OPT825 SMT HOT AIR CONVERSION KIT

+

$1,600.00 $1,440.00
23.0 Lbs.

JBC Tools Smart Fume Extractor only runs when needed.

+

$168.00 $151.20
Guide tube for the AL250 Auto-Feed Iron. Size Ø 0,4 - 0,5 mm.
+

$168.00 $151.20
Guide tube for the AL250 Auto-Feed Iron. Size Ø 0,9 - 1 mm.
+

$168.00 $151.20
Guide tube for the AL250 Auto-Feed Iron. Size Ø 0,6- 0,8 mm.
+

$186.00 $167.40
Guide tube for the AL250 Auto-Feed Iron. Size Ø 1,1 - 1,5 mm
+

$233.00 $209.70
Guide tube for the AL250 Auto-Feed Iron. Size Ø 1,6 - 1,8 mm.
+

$37.00 $33.30
It provides a safe grip of the tool while not in use. Intelligent Heat Management The metal top detects the tool and activates the Sleep & Hibernation...
+

$40.00 $36.00
It provides a safe grip of the tool while not in use. Intelligent Heat Management The metal top detects the tool and activates the Sleep & Hibernation...
+

$37.00 $33.30
It provides a safe grip of the tool while not in use. Intelligent Heat Management The metal top detects the tool and activates the Sleep &...
+

$16.00 $14.40
Soft foam grips for T245-A and T245-C ensure a better manual control of the tool and greater comfort when working. Easily replace the damaged grips...
+

$17.00 $15.30
Soft foam grips for T210-A ensure a better manual control of the tool and greater comfort when working. Easily replace the damaged grips using the...
+

$19.00 $17.10
Soft foam grips for NT105-A ensure a better manual control of the tool and greater comfort when working. Easily replace the damaged grips using the...
+

$10.00 $9.00
Cap replacement for FAE030 and FAE040 .
+

$44.00 $36.90
The different anchor points facilitate tip changing in all soldering and desoldering iron models.
+

$45.00 $40.50
Heating element for In2100
+

$15.00 $13.50
For 14ST Soldering iron
+
Product filters Product filters