Virtual Industries V8920E-LMS-ESD Pen-Vac ESD-Safe Vacuum Pen Handling Tool, (3) bent & (3) straight probes, 1/8", 1/4", and 3/8" conductive silicone cups. The Virtual Industries V8920E-LMS-ESD Pen-Vac comes with two of each cup sizes.
Virtual Industries V8920E-LMS-ESD PEN-VAC Vacuum Pen
V8920E-LMS-ESD PEN-VAC is totally self-contained. There are no batteries or hoses to get in the way. Operation is as follows:
1. Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place. Put the probe snuggly on the tip of the vacuum pen. Make sure that there is no dust on the rubber vacuum tip. NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.
2. Depress and hold the button on the side of the
V8920E-LMS-ESD Pen-Vac tool.
3. Touch the Virtual Industries V8920E-LMS-ESD Pen-Vac vacuum tip squarely to the part and release the button. The part is now grasped.
4. Move the part to where you want it and depress the button again. The part is now released.
NOTE: The Virtual Industries V8920E-LMS-ESD Pen-Vac tool works only with the rubber vacuum tips. The rubber is required for an air-tight seal.
V8920-LMS-ESD Virtual Industries Pen-Vac
Purchase a Virtual Industries V8920E-LMS-ESD Pen-Vac Vaccuum Pen from Howard Electronics Today..
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, MG Chemicals, Pana Vise, Qualitek, Steinel, Scienscope, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.
No posts found