Specialty Tools and Accessories

Chip Quik SMD291 CHIP QUIK FLUX

CAPWIZ Capacitor Wizard ESR Tester ( CAP1B ) by Midwest Devices

Capacitor Wizard ( CAP1B & CAPSVR ) by Midwest Devices with the CapWizSaver Installed

Auburn Technology P-20B RF Probe is a High frequency RF measurements

MidWest Devices CapKit Repair Kit is available if you accidentally check a charged or powered up capacitor you may damage the Capacitor Wizard®. This CAPKIT

Chip Quik SMD291ST2CC6 2cc Squeeze Tubes Flux $13.95

Chip Quik SMD291NL 5cc (5 Grams) Syringe of Lead-Free Flux

ChipQuik SMDSW.031 4oz No-Clean Solder Wire 63/37 Tin/Lead

Helps protect against accidentally damaging the Capacitor Wizard® by attempting to test charged capacitors. Make a habit of following good service practices and discharge all capacitors before attempting a test - even if you install the CapSVR. Always remove power from the circuit under test.

V8920E-LMS-ESD Virtual Industries Pen-Vac Pro Series Vacuum Pen

Virtual Industries TV-1000 Tweezer Vac System 110V - Includes a 5' coiled hose (VCH-5/64-5), Set of nine vacuum tips (VCS-9-B), Vacuum handle

VSPT2010-BD Virtual Industries Delrin ESD safe tip

VSPT3020-BD Virtual Industries Delrin ESD safe tip

No Clean Flux Pen

HV-KIT-ESD Virtual Handi-Vac Vacuum Tool

V9013-ESD Virtual Industries 1/8" (3.18mm) diameter vacuum cups

ChipQuik SMDSW.020 4oz No-Clean Solder Wire 63/37 Tin/Lead

This is a very useful aid to the Electronics Industry for inspection, removal and replacement of Surface Mount Components.

Chip Quik SMD291NL 5cc (5 Grams) Syringe of Lead-Free Flux

350 Panavise Multi-Purpose Work Center

MidWest Devices CapMeter replacement is a full analog replacement meter movement.

VSPT1005-BD Virtual Industries Delrin ESD safe tip

Virtual Industries HV-KIT-II-ESD Pick up tool with five probes and cups.

V3972-B Virtual Industries 15 guage bent 1/2" (12.7mm) probe - .072" (1.83mm) OD needle

V9018-ESD Virtual Industries 3/16" vacuum cup

BVJ-038-ESD Virtual Industries BULBVAC Bulb Type Vacuum Pickup Tool (ESD Safe)

VSPT4030-BD Virtual Industries Delrin ESD safe tip

V9009-B Virtual Industries 3/32" diameter vacuum cups

V9013-B Virtual Industries 1/8" (3.18mm) diameter diameter vacuum cups, Black Buna-N Static Dissipative non-marking - ESD SAFE

V9038-B Virtual Industries 3/8"(9.53mm) diameter diameter vacuum cups, Black Buna-N Static Dissipative non-marking - ESD SAFE

301 Panavise Standard Panavise

BVJ-075-ESD Virtual Industries Bulb Vac with 3/4 inch cup

HV-KIT-II-B Virtual Industries HANDI-VAC KIT With 5 Probes & Cups - ESD-Safe - Three bent 1/8" (3.18mm), 3/16" (4.76mm),1/4" (6.35mm) and two straight 3/8" (9.53mm),1/2" (12.7mm) diameter Static Dissipative Buna-N Cups

MidWest Devices CW1B-PR Replacement Capacitor Wizard® probes complete with cable.

HVPB-6 Virtual Industries HANDI-VAC KIT Display Pack - ESD-Safe - With a 1/8" (3.18mm) cup mounted on the tool, one bent probe 1/4" (6.35mm) and one straight probe 3/8" (9.53mm) diameter Static Dissipative Buna-N Cups.

VSPT-0803-BD Small Part Tip Beige ESD Safe Delrin Bent 0.008

V9025-ESD Virtual Industries 1/4"(6.35mm) diameter diameter vacuum cups, Black High-temperature Conductive Silicone - ESD SAFE

201 Panavise PV Jr. Combination Vise Head and Base

381 Panavise Vacuum Base

V9025-B Virtual Industries 1/4" diameter vacuum cups

V9038-ESD Virtual Industries 3/8" diameter vacuum cups

V9050-ESD Virtual Industries 1/2" diameter vacuum cup

SMDSG10CCR 10CC Syringe Dispensing Gun

Solder Flux

396 Panavise Wide Opening Head

V8903-D-B Virtual Industries Black Buna-N Static Dissipative non-marking - ESD SAFE 3/32" (2.38mm) cup on a 1/2" (12.7mm) bent probe

V8903-S-B Virtual Industries Black Buna-N Static Dissipative non-marking - ESD SAFE 1/8" (3.18mm) cup on a 1/2" (12.7mm) bent probe

VBM-3 Virtual Industries Vacuum Pen Holder with posts to accommodate up to eight of our luer slip vacuum tips. Can be used with any of our vacuum handles or vacuum pens.

V9018-C Virtual Industries 3/16"(4.76mm) diameter diameter vacuum cups, High-temperature Clear Silicone - NON ESD SAFE

V9025-C Virtual Industries 1/4"(6.35mm) diameter diameter vacuum cups, High-temperature Clear Silicone - NON ESD SAFE

V9038-C Virtual Industries 3/8"(9.53mm) diameter diameter vacuum cups, High-temperature Clear Silicone - NON ESD SAFE

Qualitek NC600-LF96530-010 Qualitek NC Wire SAC 305, .010 1.1% 1lb.

312 Panavise Tray Base Mount

Panavise 209 Precision Vise w/vacuum base

303 Panavise Standard Head

TV-1000-220 Tweezer Vac System 220V - Includes a 5' coiled hose (VCH-5/64-5), Set of nine vacuum tips (VCS-9-B), Vacuum handle (VVP-200)

BVJ-050-ESD Virtual Industries Bulb Vac with 1/2 inch cup

VSPT2515-BD Virtual Industries Delrin ESD safe tip

VSPT6040-BD Virtual Industries Delrin ESD safe tip

VSPT8060-BD Virtual Industries Delrin ESD safe tip

V8903-M-B Virtual Industries Black Buna-N Static Dissipative non-marking - ESD SAFE 1/4" (6.35mm) cup on a 1/2" (12.7mm) bent probe

V8914-P-B Virtual Industries Black High-temperature Conductive Silicone - ESD SAFE 3/16" (4.76mm) cup on a 1" (25.4mm ) bent probe

Virtual Industries V3200 Battery Operated Vacuum Tool

V9018-B Virtual Industries 3/16"(4.76mm) diameter vacuum cups

V9062-B Virtual Industries 5/8" diameter vacuum cups

308 Panavise Weighted Base Mount

315 Panavise Circuit Board Holder

DTV-2000 Dual Tweezer Vacuum System 110V - Includes two 5' coiled hoses (VCH-5/64-5), Set of nine vacuum tips (VCS-9-B), Vacuum handle (VVP-200)

HV-X Virtual Industries HANDI-VAC Without Probes or Cups - Includes box.

VSPT3020-SD Virtual Industries Delrin ESD safe tip

VSPT-KIT-8-BD Deluxe Small Parts Kit 8 Bent Delrin Tips

V8914-S-B Virtual Industries Black High-temperature Conductive Silicone - ESD SAFE 1/8" (3.18mm) cup on a 1" (25.4mm ) bent probe

V9050-B Virtual Industries 1/2"(12.70mm) diameter vacuum cups

Virtual Industries V9062-ESD Vacuum Cup

V9075-ESD Virtual Industries 3/4" (19.05mm) diameter vacuum cups, Black High-temperature Conductive Silicone - ESD SAFE