Specialty

Specialty Tools and Accessories

Specialty Tools and Accessories sold by HEI

Howard Electronics offers Specialty Items like Industrial Needles, Solder Pots, Vacuum Pickup Tools, Solder, Volt Meters, Wire Strippers, Tweezers and Pliers, Glue Guns, and Fume Extractors, Soldering Tips, Desoldering Tips, and Microscopes to meet your needs for the serious production line technician, prototype engineer, and the do-it-yourselfers. Choose the product for your best choice.

Purchase Specialty Tools and Accessories sold by Howard Electronics Today!

$684.30 $615.00
TV-1500-SP8-BD-110, Virtual Industries
110 VOLT AC TV-1500-SP8-BD-110 TWEEZER VAC® Elite ESD Safe Kit With ESD Safe Delrin Small Parts Tips sold by Howard Electronics The TWEEZER-VAC ELITE...
+

$36.99 $29.99
201, PanaVise

201 Panavise PV Jr. Combination Vise Head and Base

+

$28.11 $23.95
203, PanaVise

203 Panavise PV Jr. Vise Head with 0.625 inch shaft for 300 series bases

+

$4.02
204, PanaVise

204 Panavise Neoprene pads for use with 201, 201F, 201P, and 203

+

$25.81 $22.00
207, PanaVise

207 PanaVice Vice Buddy JR.

+

$3.82 $3.25
Panavise 239 Speed Control Handle sold by Howard Electronics 239 Panavise Speed Control Handle Accessory for 201 , 203, 207 and 209...
+

$29.99 $25.99
300, PanaVise

300 Panavise Standard Base

+

$61.99 $53.99

301 Panavise Standard Panavise

+

$34.99 $29.99
303, PanaVise

303 Panavise Standard Head

+

$47.04 $39.95
304, PanaVise

304 Panavise Low Profile Head

+

$29.99 $25.99
305, PanaVise

305 Panavise Low Profile Base

+

$38.99 $33.99
308, PanaVise

308 Panavise Weighted Base Mount

+

$58.89 $49.95

311 Panavise Bench Clamp Base Mount

+

$30.99 $26.99
312, PanaVise

312 Panavise Tray Base Mount

+

$48.99 $41.99
315, PanaVise

315 Panavise Circuit Board Holder

+

$21.99 $19.19
316, PanaVise

316 Panavise Extra Arms for 315, 324, and 333

+

$11.66 $9.95
318-30, PanaVise

318-30 Panavise 30 inch Crossbar for 315, 324, and 333

+

$6.99 $5.39
319, PanaVise

319 Panavise Model 315, 324, C.B. Holder Replacement Knob Set

+

$109.99 $95.99

324 Panavise Electronic Work Center

+

$120.99 $104.99

333 Panavise Rapid Assembly Circuit Board Holder

+

$32.99 $28.99
335, PanaVise

335 Panavise Magnet Base - Adapts to 201, 300, and 305 Bases

+

$29.99 $25.99
337, PanaVise

337 Panavise Fixturing Head

+

$3.99 $2.99
343, PanaVise

343 Panavise Nylon Jaws for 301, 303, 304, and 381 with screws

+

$4.99 $3.89
344, PanaVise

344 Panavise Grooved Nylon Jaws for 301, 303, 304, and 381 with screws

+

$3.99 $2.99
346, PanaVise

346 Panavise Deluxe Neoprene Jaws for 301, 303, 304, and 381 with screws

+

$120.99 $105.99

350 Panavise Multi-Purpose Work Center

+

$16.99 $14.49
352, PanaVise

352 Panavise Teflon Jaws for 301, 303, 304, and 381 with screws

+

$15.99 $13.49
353, PanaVise

353 Panavise Plated Steel Jaws for 301, 303, 304, and 381 with screws

+

$16.99 $14.49
354, PanaVise

354 Panavise Brass Jaws for 301, 303, 304, and 381 with screws

+

$25.81 $21.95
358, PanaVise

358 Panavise Wire Manager for 366 and 396

+

$54.99 $47.99

366 Panavise Wide Opening Head

+

$19.89 $16.95
371, PanaVise

371 Panavise Solder Station

+

$64.82 $53.99

376 Panavise Self-Centering, Extra Wide Opening Head

+

$57.99 $49.99
380, PanaVise

380 Panavise Vacuum Base

+

$34.99 $29.99
380-RK, PanaVise

380-RK Panavise 380 Repair Kit

+

$87.99 $76.99

381 Panavise Vacuum Base

+

$26.99 $22.99
385, PanaVise

385 Panavise Micrometer Head

+

$58.89 $49.95

391 Panavise Micrometer Stand

+

$82.99 $71.99

396 Panavise Wide Opening Head

+

$60.99 $52.99

400 Panavise Heavy Duty Base

+

$29.99 $25.99
437, PanaVise

437 Panavise Heavy Duty Fixturing Head

+

$235.00 $225.00
Auburn Technology P-20A 3Ghz RF Probe sold by Howard Electronics Auburn Technology P-20A RF Probe is a High frequency RF measurements with your...
+

$295.00 $280.00

Auburn Technology P-20B RF Probe is a High frequency RF measurements

+

$37.50 $33.50
Auburn Technology P-20AL Replacement tip sold by Howard Electronics P20AL Replacement tip for Auburn Technology P20A 3HGz RF Probe. Purchase an...
+

$30.50 $27.50
Auburn Technology P20AS Replacement tip sold by Howard Electronics Auburn Technologies P20AS Replacement tip for Auburn Technology P20A 3HGz RF Probe...
+

$27.50 $25.00
Auburn Technology P-20AX Grounding Clip sold by Howard Electronics P20AX Replacement tip for the 3 Ghz P20A RF Probe Purchase an Aulburn...
+

$22.10 $19.92

BVJ-038-B Virtual Industries BULB-VAC With One Vacuum Cup - 3/8" (9.53mm) diameter Static Dissipative Buna-N Cup.

+

$22.10 $19.92

BVJ-038-ESD Virtual Industries BULBVAC Bulb Type Vacuum Pickup Tool (ESD Safe)

+

$22.10 $19.92

BVJ-050-B Virtual Industries BULB-VAC With One Vacuum Cup - 1/2" (12.7mm) diameter Static Dissipative Buna-N Cup.

+

$22.10 $19.92

BVJ-050-ESD Virtual Industries Bulb Vac with 1/2 inch cup

+

$24.80 $22.32

BVJ-062-B Virtual Industries BULB-VAC With One Vacuum Cup - 5/8" (15.88mm) diameter Static Dissipative Buna-N Cup.

+

$24.80 $22.32

BVJ-062-ESD Virtual Industries Bulb Vac with 5/8 inch cup

+

$24.80 $22.32

BVJ-075-B Virtual Industries BULB-VAC With One Vacuum Cup - 3/4" (19.05mm) diameter Static Dissipative Buna-N Cup.

+

$24.80 $22.32

BVJ-075-ESD Virtual Industries Bulb Vac with 3/4 inch cup

+

$16.44 $14.00

BVJ-X Virtual Industries BULB-VAC, tool only - Without vacuum cup

+

$15.00 $10.00
MidWest Devices CapMeter Plastic cover
+

$269.95 $189.95

Capacitor Wizard ( CAP1B & CAPSVR ) by Midwest Devices with the CapWizSaver Installed

+

$45.00 $30.00

MidWest Devices CW1B-PR Replacement Capacitor Wizard® probes complete with cable.

+

$35.00 $25.00

Helps protect against accidentally damaging the Capacitor Wizard® by attempting to test charged capacitors. Make a habit of following good service practices and discharge all capacitors before attempting a test - even if you install the CapSVR. Always remove power from the circuit under test.

+

$30.00 $20.00

MidWest Devices CapKit Repair Kit is available if you accidentally check a charged or powered up capacitor you may damage the Capacitor Wizard®. This CAPKIT

+

$50.00 $30.00

MidWest Devices CapMeter replacement is a full analog replacement meter movement.

+

$239.95 $179.95

CAPWIZ Capacitor Wizard ESR Tester ( CAP1B ) by Midwest Devices

+


$15.95

Chip Quik SMD291 CHIP QUIK FLUX

+

$14.15 $11.95

Chip Quik SMD291NL 5cc (5 Grams) Syringe of Lead-Free Flux

+

$18.74 $14.95
SMD291ST2CC6, Chip Quik

Chip Quik SMD291ST2CC6 2cc Squeeze Tubes Flux $13.95

+

$21.00 $17.95

Chip Quik SMD291NL 5cc (5 Grams) Syringe of Lead-Free Flux

+

$65.00 $59.95


SMDSG10CCR 10CC Syringe Dispensing Gun

+

$24.95
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Sn/Pb in 35g/10cc syringe with plunger and tips. Revolutionary Formula: No...
+

$74.95 $69.99
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Sn/Pb in 500g jar. Revolutionary Formula: No Refrigeration Required! Alloy: Sn63/Pb37...
+

$75.95 $70.49
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Lead-Free SAC305 in 500g jar. Revolutionary Formula: No Refrigeration Required! Alloy:...
+

$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Lead-Free SAC305 in 500g jar. Revolutionary Formula: No Refrigeration Required! Alloy:...
+

$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble (T4) Sn42/Bi57.6/Ag0.4 Low Temperature 90% metal melts @ 138C, 281F Water-Soluble in...
+

$74.95 $69.99
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble Sn/Pb in 500g jar. Revolutionary Formula: No Refrigeration Required! Specifications...
+

$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble Lead-Free SAC305 in 500g jar. Revolutionary Formula: No Refrigeration Required!...
+


$9.95
Liquid Zinc Stained Glass Soldering Flux. Comes with Brush Applicator. Flux Type: Water Washable (Wash off with hot water 60C+) Packaging: 4oz Squeeze...
+

$11.95
Liquid Zinc Stained Glass Soldering Flux. Comes with Brush Applicator. Flux Type: Water Washable (Wash off with hot water 60C+) Packaging: 8oz Squeeze...
+

$29.95
Co-Solvent Low Evaporating Flux Remover Specifications Boiling Point: 175-215C Flash Point: 77C Vapor Pressure: 0.1kPa Liquid Density:...
+

$157.00
Co-Solvent High Evaporating (Non-Flammable) Rinse Agent Specifications Boiling Point: 55C Flash Point: None Vapor Pressure: 27.5kPa Heat of...
+

$82.16
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$15.61
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$22.19
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$34.51
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$45.08
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$65.31
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$12.41
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$16.98
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$26.78
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$39.19
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$6.45
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$4.27
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$8.95
Liquid Flux Alcohol-Based No-Clean in 6ml (0.2oz) Refillable Pen with tip and brush Specifications Flux Type: No-Clean Liquid (for Leaded and...
+

$8.95
Liquid Flux Alcohol-Based No-Clean Water-Washable in 6ml (0.2oz) Refillable Pen with tip and brush Specifications Flux Type: No-Clean Water-Washable...
+

$8.95
Liquid Flux No-Clean in 6ml (0.2oz) Refillable Pen with tip and brush Specifications Flux Type: No-Clean Liquid Flux (for Leaded and Lead-Free...
+

$8.95
Liquid Flux Organic Acid Water-Soluble in 6ml (0.2oz) Refillable Pen with tip and brush Specifications Flux Type: Water Washable Liquid (for Leaded...
+
Product filters Product filters