Specialty Tools and Accessories

Chip Quik SMD291 CHIP QUIK FLUX

CAPWIZ Capacitor Wizard ESR Tester ( CAP1B ) by Midwest Devices

Capacitor Wizard ( CAP1B & CAPSVR ) by Midwest Devices with the CapWizSaver Installed

Auburn Technology P-20B RF Probe is a High frequency RF measurements

MidWest Devices CapKit Repair Kit is available if you accidentally check a charged or powered up capacitor you may damage the Capacitor Wizard®. This CAPKIT

Chip Quik SMD291ST2CC6 2cc Squeeze Tubes Flux $13.95

Chip Quik SMD291NL 5cc (5 Grams) Syringe of Lead-Free Flux

ChipQuik SMDSW.031 4oz No-Clean Solder Wire 63/37 Tin/Lead

Helps protect against accidentally damaging the Capacitor Wizard® by attempting to test charged capacitors. Make a habit of following good service practices and discharge all capacitors before attempting a test - even if you install the CapSVR. Always remove power from the circuit under test.

V8920E-LMS-ESD Virtual Industries Pen-Vac Pro Series Vacuum Pen

Virtual Industries TV-1000 Tweezer Vac System 110V - Includes a 5' coiled hose (VCH-5/64-5), Set of nine vacuum tips (VCS-9-B), Vacuum handle

VSPT2010-BD Virtual Industries Delrin ESD safe tip

VSPT3020-BD Virtual Industries Delrin ESD safe tip

No Clean Flux Pen

HV-KIT-ESD Virtual Handi-Vac Vacuum Tool

V9013-ESD Virtual Industries 1/8" (3.18mm) diameter vacuum cups

ChipQuik SMDSW.020 4oz No-Clean Solder Wire 63/37 Tin/Lead

This is a very useful aid to the Electronics Industry for inspection, removal and replacement of Surface Mount Components.

Chip Quik SMD291NL 5cc (5 Grams) Syringe of Lead-Free Flux

350 Panavise Multi-Purpose Work Center

MidWest Devices CapMeter replacement is a full analog replacement meter movement.

VSPT1005-BD Virtual Industries Delrin ESD safe tip

Virtual Industries HV-KIT-II-ESD Pick up tool with five probes and cups.

V3972-B Virtual Industries 15 guage bent 1/2" (12.7mm) probe - .072" (1.83mm) OD needle

V9018-ESD Virtual Industries 3/16" vacuum cup

BVJ-038-ESD Virtual Industries BULBVAC Bulb Type Vacuum Pickup Tool (ESD Safe)

VSPT4030-BD Virtual Industries Delrin ESD safe tip

V9009-B Virtual Industries 3/32" diameter vacuum cups

V9013-B Virtual Industries 1/8" (3.18mm) diameter diameter vacuum cups, Black Buna-N Static Dissipative non-marking - ESD SAFE

V9038-B Virtual Industries 3/8"(9.53mm) diameter diameter vacuum cups, Black Buna-N Static Dissipative non-marking - ESD SAFE

301 Panavise Standard Panavise

BVJ-075-ESD Virtual Industries Bulb Vac with 3/4 inch cup

HV-KIT-II-B Virtual Industries HANDI-VAC KIT With 5 Probes & Cups - ESD-Safe - Three bent 1/8" (3.18mm), 3/16" (4.76mm),1/4" (6.35mm) and two straight 3/8" (9.53mm),1/2" (12.7mm) diameter Static Dissipative Buna-N Cups

MidWest Devices CW1B-PR Replacement Capacitor Wizard® probes complete with cable.

HVPB-6 Virtual Industries HANDI-VAC KIT Display Pack - ESD-Safe - With a 1/8" (3.18mm) cup mounted on the tool, one bent probe 1/4" (6.35mm) and one straight probe 3/8" (9.53mm) diameter Static Dissipative Buna-N Cups.

VSPT-0803-BD Small Part Tip Beige ESD Safe Delrin Bent 0.008

V9025-ESD Virtual Industries 1/4"(6.35mm) diameter diameter vacuum cups, Black High-temperature Conductive Silicone - ESD SAFE

201 Panavise PV Jr. Combination Vise Head and Base

381 Panavise Vacuum Base

V9025-B Virtual Industries 1/4" diameter vacuum cups

V9038-ESD Virtual Industries 3/8" diameter vacuum cups

V9050-ESD Virtual Industries 1/2" diameter vacuum cup

SMDSG10CCR 10CC Syringe Dispensing Gun