Soldering Accessories

Soldering Accessories sold by Howard Electronics.

Accessories and tools for your soldering equipment including SMD solder removal kits, helping hands, magnifiers, smoke absorbers, and much more at low prices. We have solder by Qualitek, Solder Paste and flux by Chip Quik and Qualitek. Tip Tinner by JBC Tools and other items by Xytronic, Edsyn and JBC Tools.

Purchase Soldering Accessories today from Howard Electronics.

$12.41
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$9.95
No-Clean Tack Flux. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Very low viscosity synthetic paste flux. More...
+

$113.00 $101.70
Aspiration for up to 4 stands + clamp to fix it in place. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique...
+

$27.95
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Lead-Free SAC305 in 35g/10cc syringe with plunger and tips. Revolutionary Formula: No...
+

$240.00 $216.00
High emissivity tape provides greater absorption of infrared for a faster and more uniform preheating of PCBs with metal substrates. 10x faster with...
+

$14.95
No-Clean Tack Flux. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Very low viscosity synthetic paste flux. More...
+

$11.22
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$29.00 $26.10
Heating Element for 30ST Soldering Iron
+

$44.00 $39.60
Heating element for 50S soldering iron
+

$17.45
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$17.00 $15.30
Soft foam grips for T210-A ensure a better manual control of the tool and greater comfort when working. Easily replace the damaged grips using the...
+

$1,220.00 $1,098.00
This is the ideal solution for improving the quality of any solder joint by using nitrogen as it provides extra heat and helps prevent tip oxidation....
+

$9.95
No-Clean Tack Flux. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Very low viscosity synthetic paste flux. More...
+

$80.00 $72.00
Aspiration system for Modular Stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated into the...
+

$8.00 $7.20
Recommended for solder paste Type 3 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND20S6 20G Stainless Steel Dispensing Needle...
+

$39.19
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$730.00 $657.00
For Automated Processes. It features a large capacity tank with easy extraction and a large opening for easy tip access. The CLMR can be rotated up...
+

$66.00 $59.40
This foot switch makes the tool enter hibernation mode, causing no thermal stress when the component is placed on the PCB. Ideal for working with...
+

$45.00 $40.50
Heating element for In2100
+

$19.00 $17.10
Soft foam grips for NT105-A ensure a better manual control of the tool and greater comfort when working. Easily replace the damaged grips using the...
+

$17.00 $15.30
Very soft and temperature resistant receptacle allows tapping and wiping of the tip to eliminate the excess of solder.
+

$29.95
Co-Solvent Low Evaporating Flux Remover Specifications Boiling Point: 175-215C Flash Point: 77C Vapor Pressure: 0.1kPa Liquid Density:...
+

$860.00 $774.00
Nitrogen improves the quality of any solder joint as it provides extra heat and helps prevent tip oxidation. The MN-A regulates nitrogen flow to the...
+

$8.00 $7.20
Recommended for solder paste Type 3 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND22S6 22G Stainless Steel Dispensing Needle...
+
Product filters Product filters