Soldering

Soldering Stations sold by HEI

Howard Electronic Instruments is a worldwide distributor of soldering stations, soldering tools, and soldering irons by Xytronic, JBC Tools, Jovy, Atten, DEN-ON Instruments, EDSYN, and Goot manufactures. We also have all soldering tips, soldering handpieces, soldering stands, soldering parts, soldering pots, soldering fume extractors, butane soldering irons, and soldering accessories for all the soldering stations we sell.

$87.55
PRODUCT HIGHLIGHTS - No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core...
+

$1.99
5 ft of 2.8mm solder wick desoldering braid- No Clean
+

$1.99 $1.85
5 ft of 2.0mm solder wick desoldering braid- No Clean
+

$1.99 $1.85
5 ft of 1.5mm solder wick desoldering braid- No Clean
+


$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble (T4) Sn42/Bi57.6/Ag0.4 Low Temperature 90% metal melts @ 138C, 281F Water-Soluble in...
+

$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble Lead-Free SAC305 in 500g jar. Revolutionary Formula: No Refrigeration Required!...
+

$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Lead-Free SAC305 in 500g jar. Revolutionary Formula: No Refrigeration Required! Alloy:...
+

$75.95 $70.49
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Lead-Free SAC305 in 500g jar. Revolutionary Formula: No Refrigeration Required! Alloy:...
+

$74.95 $69.99
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble Sn/Pb in 500g jar. Revolutionary Formula: No Refrigeration Required! Specifications...
+

$74.95 $69.99
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Sn/Pb in 500g jar. Revolutionary Formula: No Refrigeration Required! Alloy: Sn63/Pb37...
+

$480.00 $415.00
Goot POT-200CHS 120V Replacement Heater Set for POT-202C and POT-200C 120V
+

$1,600.00
Outline This pre-heater uses 400W IR or 2×200W IR heaters and closed - loop control to enable fast and safety manual soldering. It is designed for...
+

$65.00 $58.50
These special cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that...
+

$65.00 $58.50
These special cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that...
+

$65.00 $58.50
These special cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that...
+

$65.00 $58.50
These special cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that...
+

$40.00 $36.00
These cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that centers the...
+

$40.00 $36.00
These cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that centers the...
+

$40.00 $36.00
These cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that centers the...
+

$40.00 $36.00
These cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that centers the...
+

$40.00 $36.00
These cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that centers the...
+

$40.00 $36.00
These cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that centers the...
+

$40.00 $36.00
These cartridges are desgined for the use in Automated Soldering Processes. The new cartridge design includes a square cross-section that centers the...
+

$25.00 $22.50
Short nosed pliers with ESD safe hand grips for general electronics jobs. With extra slim profile to allow access to high density areas, an...
+

$41.00 $36.90
Tweezer nosed pliers with ESD safe hand grips for precision jobs. An ultra-precise needlenosed pliers capable of grasping and holding wire less...
+

$40.00 $36.00
ESD safe flat tip clip pliers ideal for extracting and adjusting cartridges of the PA120-A & HT420-A.
+

$4,565.00 $4,108.50
The PHBE is the best solution for preheating big multilayer PCBAs, and it works with convection technology. It allows gradual heating up, reducing...
+

$85.00 $76.50
The ESD safe Kapton Tape allows you to fix the Thermocouples on the PCB. Polyimide film coated with a special surface conductive adhesive. Leaves no...
+

$240.00 $216.00
High emissivity tape provides greater absorption of infrared for a faster and more uniform preheating of PCBs with metal substrates. 10x faster with...
+

$68.00 $61.20
The Thermocouple Type K reads the temperature on a specific point of the PCB. It helps you manage the temperature profiles when used with the...
+

$38.00 $34.20
The Kapton Tape allows you to fix the Thermocouples on the PCB. Adhesive tape with silicone resin, high heat resistance and excellent solvent...
+

$66.00 $59.40
This foot switch makes the tool enter hibernation mode, causing no thermal stress when the component is placed on the PCB. Ideal for working with...
+

$390.00 $351.00
This foot switch makes the tool enter sleep or hibernation modes, causing no thermal stress when the component is placed on the PCB. Ideal for working...
+

$360.00 $324.00
The foot switch makes the tool enter sleep or hibernation modes, causing no thermal stress when the component is placed on the PCB. Ideal for working...
+

$280.00 $252.00
This foot switch makes the tool enter sleep or hibernation modes, causing no thermal stress when the component is placed on the PCB. Ideal for working...
+

$11.30 $10.17
Recommended for solder paste Type 6 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND30S6 30G Stainless Steel Dispensing Needle...
+

$8.00 $7.20
Recommended for solder paste Type 5 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND27S6 27G Stainless Steel Dispensing Needle...
+

$11.00 $9.90
Recommended for solder paste Type 5 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND27P 27G Tapered Dispenser Tip...
+

$7.30 $6.57
Recommended for solder paste Type 4 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND25S6 25G Stainless Steel Dispensing Needle...
+

$11.00 $9.90
Recommended for solder paste Type 4 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND25P 25G Tapered Dispenser Tip...
+

$8.00 $7.20
Recommended for solder paste Type 3 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND23S6 23G Stainless Steel Dispensing Needle...
+

$8.00 $7.20
Recommended for solder paste Type 3 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND22S6 22G Stainless Steel Dispensing Needle...
+

$11.00 $9.90
Recommended for solder paste Type 3 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND22P 22G Tapered Dispenser Tip...
+

$8.00 $7.20
Recommended for solder paste Type 3 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND21S6 21G Stainless Steel Dispensing Needle...
+

$8.00 $7.20
Recommended for solder paste Type 3 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND20S6 20G Stainless Steel Dispensing Needle...
+

$11.00 $9.90
Recommended for solder paste Type 3 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND20P 20G Tapered Dispenser Tip...
+

$8.00 $7.20
Recommended for solder paste Type 2 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND18S6 18G Stainless Steel Dispensing Needle...
+

$11.00 $9.90
Recommended for solder paste Type 2 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND18P 18G Tapered Dispenser Tip SPECIFICATIONS Total...
+

$12.00 $10.80
Set consisting of several solder paste dispensing needles with different gauge, from gauge 18 to gauge 30, recommended for solder paste Type 2, 3, 4, 5...
+

$12.00 $10.80
Set consisting of several dispenser tapered tips, with different gauge recommended for solder paste Type 2, 3, 4 and 5. Supplied in boxes of 10...
+

$8.00 $7.20
The sleeves for NP105 and NP115 suit the position of user´s fingers in order to provide a greater control of tool. They are adaptable to each arm of...
+

$1,025.00 $922.50
Nitrogen improves the quality of any solder joint as it provides extra heat and helps prevent tip oxidation. The MNE-A regulates nitrogen flow to the...
+

$860.00 $774.00
Nitrogen improves the quality of any solder joint as it provides extra heat and helps prevent tip oxidation. The MN-A regulates nitrogen flow to the...
+

$1,220.00 $1,098.00
This is the ideal solution for improving the quality of any solder joint by using nitrogen as it provides extra heat and helps prevent tip oxidation....
+

$1,140.00 $1,026.00
This is the ideal solution for improving the quality of any solder joint by using nitrogen as it provides extra heat and helps prevent tip oxidation....
+

$695.00 $625.50
The HD Tweezers Set KHT470A works exclusively connected to 2 HDE-U Control Units. It works with cartridges range C470. KHT470A Set is composed of...
+

$410.00 $369.00
The JT-T2A Heater Hose Set works with the JTSE-2A Hot Air Station, including the JTSE-2QA model. It allows you to repair all types of SMD electronic...
+

$200.00 $180.00
It perfectly holds the JT-TA tools when not in use. Its adjustable tool holder suits your work position and the quick nozzle changer allows to...
+

$315.00 $283.50
The HD Thermal Tweezers HT470-A works exclusively connected to 2 HDE-U Control Units and requires the Stand HDT-SE. It works with cartridges range...
+

$350.00 $315.00
The Sleep & Hibernation modes automatically reduce the tip temperature when the tool is in the stand. As a result, a tip`s life lasts up to 5 times...
+

$1,250.00 $1,125.00
The HDE station is the most powerful soldering unit of the JBC range. Now its new power supply (SMPS) ensures high efficiency and increased...
+

$3,125.00 $2,812.50
The HDE-KD tweezers station has been designed to reduce the soldering time in applications that require a large amount of heat. Some examples of...
+

$1,575.00 $1,417.50
The HDE station is the most powerful soldering unit of the JBC range. Watch video for soldering examples. It works with the JBC Most Efficient...
+

$310.00 $279.00
With solder wire perforation. It is compatible with solder wire diameter ø 1.5 mm. This Guide Kit suits for the SFR Solder Feeder and its...
+

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 1.2 - 1.5 mm. This Guide Kit suits for the SFR Solder Feeder and...
+

$310.00 $279.00
With solder wire perforation. It is compatible with solder wire diameter ø 1.0 mm. This Guide Kit suits for the SFR Solder Feeder and its...
+

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 0.9 - 1.0 mm. This Guide Kit suits for the SFR Solder...
+

$310.00 $279.00
With solder wire perforation. It is compatible with solder wire diameter ø 0.8 mm. This Guide Kit suits for the SFR Solder Feeder and its...
+

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 0.7 - 0.8 mm. This Guide Kit suits for the SFR SolderFeeder and...
+

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 0.5 - 0.6 mm. This Guide Kit suits for the SFR Solder Feeder and...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 1.5 mm single-core solder wires. With a small blade that perforates the solder wire down...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 1.2 - 1.5 mm solder wires. You can easily change the guide set depending on the solder...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 0.8 mm single-core solder wires. With a small blade that perforates the solder wire down...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 1.0 mm single-core solder wires. With a small blade that perforates the solder wire...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 0.9 - 1.0 mm solder wires. You can easily change the guide set depending on the solder...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 0.7 - 0.8 mm solder wires. You can easily change the guide set depending on the solder...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 0.5 - 0.6 mm solder wires. You can easily change the guide set depending on the solder...
+

$3,125.00 $2,812.50
The GN-A supplies nitrogen to the T210-NA, T245-NA or the T470-NA Nitrogen Handle. It provides extra heat and helps to prevent tip oxidation. This...
+

$13.00 $11.70
FL-A is a flux brush designed to be used in the preparation of printed circuits prior to soldering an SMD component, especially flat pack integrated...
+

$4,255.00 $3,829.50
The FAE is the most efficient solution to avoid exposure to solder fumes. It optimizes fume extraction operating only when needed. The extractor...
+

$33.00 $29.70
Replacement for pre-filter. JBC Fume Extractor FAE2-5A features a compact three-layered filter The combination of the three-layered filter system...
+

$465.00 $418.50
JBC Fume Extractor FAE2-5A features a compact three-layered filter This replacement for Compact Filter includes Hepa Filter, Carbon Filter and...
+

$33.00 $29.70
Replacement for pre-filter. JBC Fume Extractor FAE1 features a compact three-layered filter The combination of the three-layered filter system...
+

$440.00 $396.00
JBC Fume Extractor FAE1 features a compact three-layered filter This replacement for Compact Filter includes Hepa Filter, Carbon Filter and...
+

$75.00 $67.50
Round nozzle for ambient fume extraction. You can easily attach the nozzle to FAE020 and FAE070 Flexible Arms. Arms not included.
+

$75.00 $67.50
Rectangular nozzle for ambient fume extraction. You can easily attach the nozzle to FAE020 and FAE070 Flexible Arms. Arms not included.
+

$265.00 $238.50
Completely flexible arm to be adjusted to your workbench. It features a clamp to fix it in place. The Fume Extractor FAE2-5B regulates the airflow...
+

$80.00 $72.00
Aspiration system for Compact Stations Stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated...
+

$80.00 $72.00
Aspiration system for Modular Stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated into the...
+

$113.00 $101.70
Aspiration for up to 4 stands + clamp to fix it in place. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique...
+

$37.00 $33.30
Aspiration for up to 4 stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated into the stand....
+

$255.00 $229.50
The sleep & hibernation mode automatically reduces the tip temperature when the tool is in the stand. As a result, a tip`s life lasts up to 5 times longer....
+

$4,285.00 $3,856.50
The DME manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools....
+

$3,225.00 $2,902.50
For Automated Processes and Heavy Duty Purposes. This Cartridge Stand is designed to be used in combination with the new Cartridges R470. The...
+

$3,225.00 $2,902.50
For Automated Processes and Standard Soldering Purposes, This Cartridge Stand is designed to be used in combination with the new Cartridges R245....
+
Product filters Product filters