Xytronic LF-853D Multi-Function SMD Rework Station with 426DLX Fume Extractor
Xytronic LF-853D Multi function rework system. Soldering, Desoldering and Hot air system. Specializing in lead free soldering/desoldering and surface mount devices with temperature controlled hot air. Tools can be used simultaneously.
Xytronic LF-853D Rework Station Key Features:
• Heater/Sensor Failed Detection: If the sensor circuit fails, the heater power is shut down.
• Energy Saver Mode: If the stations is left idle for 20 minutes, the energy saver feature will automatically engage, resetting the temperature to 150 deg. celsius from the previous setting.
• Temperature "Lock-Out" Feature: The temperature can be locked with a password code.
• ESD Safe and Spike Free Circuitry: The "Zero Voltage" electronic switching design protects voltage and current sensitive components (CMOS devices, etc) against damaging current and transient voltage spikes commonly produced by less efficient, mechanically switched stations.
• Delayed Suction: To eliminate the problem of solder clogging up the tip, a delayed switch feature has been incorporated for the unit that allows the pump to continue sucking for 1.5 seconds after the actuator switch is released.
Xytronic LF-853D Rework Station Ships With:
• Soldering Iron 307K Pre-Loaded With Standard Tip 44-510601
• Desoldering DIA100 Iron Per-Loaded With Standard Tip 44-915412
• Hot Air Wand With 4 Nozzles
• A/C Power Cord
• 2 Iron Holders With Tip Cleaners
• Hot Air Wand Holder
• Maintenance Kit
• 468ESD Fume Extractor
• Manual
Replacement Heating Element for Hot Air Wand 79-460012
Purchase a Xytronic LF-853D Rework Station sold by Howard Electronics Today!
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, MG Chemicals, Pana Vise, Qualitek, Steinel, Scienscope, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.