View Solutions HEI-DA-SB ST02061101 Dual Arm Microscope Boom Stand
View Solutions ST02061101 Dual Arm Microscope Boom Stand have solid have solid metal vertical and horizontal post with a locking ring on the vertical post for stopping. The View Solutions ST02061101 Dual Arm internal ball bearing allow for smooth back and forth movement. The diameter of the mounting hole on the front or the horizontal bar is 5/8".
View Solutions ST02061101 Dual Arm Microscope Boom Stand Specification
◇ Weight: 38.25lbs (17.35kg)
◇ Size of the Base: 11.22(L)×10.236(W)×0.709(H)" (285×260×18mm)
◇ Maximal Size from vertical post to the front of base: 9.38" (238.25mm)
◇ Horizontal Bar: 20.866" (530mm); Diameter: 0.787" (20mm)
◇ Vertical Post: 15.1" (384mm); Diameter: 1.465" (37.2mm)
◇ Diameter of mounting holes in the front of horizontal bar: 5/8" (15.875mm)
◇ Maximal bearing load on the front of horizontal bar: 21lbs (9.526kg)
Purchase a View Solutions ST02061101 Dual Arm Microscope Boom Stand sold by Howard Electronics Today!
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, MG Chemicals, Pana Vise, Qualitek, Steinel, Scienscope, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.
No posts found