Soldering Accessories

Soldering Accessories sold by Howard Electronics.

Accessories and tools for your soldering equipment including SMD solder removal kits, helping hands, magnifiers, smoke absorbers, and much more at low prices. We have solder by Qualitek, Solder Paste and flux by Chip Quik and Qualitek. Tip Tinner by JBC Tools and other items by Xytronic, Edsyn and JBC Tools.

Purchase Soldering Accessories today from Howard Electronics.

$75.00 $67.50
Rectangular nozzle for ambient fume extraction. You can easily attach the nozzle to FAE020 and FAE070 Flexible Arms. Arms not included.
+

$6.45
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$24.00 $20.70
Ultra fine-tipped Tweezers for miniature jobs
+

$7.30 $6.57
Recommended for solder paste Type 4 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND25S6 25G Stainless Steel Dispensing Needle...
+

$27.95
Chip Quik 991 Series Thermally Stable Solder Paste Water-Soluble Lead-Free SAC305 in 35g/10cc syringe with plunger and tips. Revolutionary Formula:...
+

$168.00 $151.20
Guide tube for the AL250 Auto-Feed Iron. Size Ø 0,6- 0,8 mm.
+

$3,225.00 $2,902.50
For Automated Processes and Standard Soldering Purposes, This Cartridge Stand is designed to be used in combination with the new Cartridges R245....
+

$40.00 $36.00
It provides a safe grip of the tool while not in use. Intelligent Heat Management The metal top detects the tool and activates the Sleep & Hibernation...
+

$44.00 $39.60
Heating element for 80S Soldering iron
+

$37.00 $33.30
It provides a safe grip of the tool while not in use. Intelligent Heat Management The metal top detects the tool and activates the Sleep & Hibernation...
+

$29.95
Co-Solvent Low Evaporating Flux Remover Specifications Boiling Point: 175-215C Flash Point: 77C Vapor Pressure: 0.1kPa Liquid Density:...
+

$8.00 $7.20
Recommended for solder paste Type 3 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND22S6 22G Stainless Steel Dispensing Needle...
+

$860.00 $774.00
Nitrogen improves the quality of any solder joint as it provides extra heat and helps prevent tip oxidation. The MN-A regulates nitrogen flow to the...
+

$17.00 $15.30
Very soft and temperature resistant receptacle allows tapping and wiping of the tip to eliminate the excess of solder.
+

$19.00 $17.10
Soft foam grips for NT105-A ensure a better manual control of the tool and greater comfort when working. Easily replace the damaged grips using the...
+

$66.00 $59.40
This foot switch makes the tool enter hibernation mode, causing no thermal stress when the component is placed on the PCB. Ideal for working with...
+

$45.00 $40.50
Heating element for In2100
+

$730.00 $657.00
For Automated Processes. It features a large capacity tank with easy extraction and a large opening for easy tip access. The CLMR can be rotated up...
+

$39.19
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$80.00 $72.00
Aspiration system for Modular Stands. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique system integrated into the...
+

$8.00 $7.20
Recommended for solder paste Type 3 Supplied in boxes of 10 units. PRODUCT COMPOSITION 10 ND20S6 20G Stainless Steel Dispensing Needle...
+

$9.95
No-Clean Tack Flux. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Very low viscosity synthetic paste flux. More...
+

$17.00 $15.30
Soft foam grips for T210-A ensure a better manual control of the tool and greater comfort when working. Easily replace the damaged grips using the...
+

$1,220.00 $1,098.00
This is the ideal solution for improving the quality of any solder joint by using nitrogen as it provides extra heat and helps prevent tip oxidation....
+

$29.00 $26.10
Heating Element for 30ST Soldering Iron
+

$17.45
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$44.00 $39.60
Heating element for 50S soldering iron
+

$14.95
No-Clean Tack Flux. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Very low viscosity synthetic paste flux. More...
+

$11.22
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$240.00 $216.00
High emissivity tape provides greater absorption of infrared for a faster and more uniform preheating of PCBs with metal substrates. 10x faster with...
+

$12.41
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$113.00 $101.70
Aspiration for up to 4 stands + clamp to fix it in place. The FAE2-5B is the most efficient solution to avoid solder fumes thanks to its unique...
+

$73.00 $65.70
Extend the distance from the Control Unit to the tool by 1m.
+

$27.95
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Lead-Free SAC305 in 35g/10cc syringe with plunger and tips. Revolutionary Formula: No...
+

$9.95
No-Clean Tack Flux. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Very low viscosity synthetic paste flux. More...
+

$49.00 $44.10
Ø 5,7mm The nozzles improve efficiency and precision of the nitrogen flow provided by the T245-NA Nitrogen Handle handle. They direct the nitrogen...
+

$1,140.00 $1,026.00
This is the ideal solution for improving the quality of any solder joint by using nitrogen as it provides extra heat and helps prevent tip oxidation....
+

$11.95
No-Clean Tack Flux. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Very low viscosity synthetic paste flux. More...
+

$29.00 $26.10
Heating element for 40ST soldering iron
+

$17.00 $15.30
The suction cups can be adjusted to the needles in order to make the placement of SMD to different sizes on board easier. These accessories allows the...
+

$195.00 $175.50
The Sleep & Hibernation modes automatically reduce the tip temperature when the tool is in the stand. As a result, a tip`s life lasts up to 5 times...
+

$49.00 $44.10
Ø 7,8mm The nozzles improve efficiency and precision of the nitrogen flow provided by the T245-NA Nitrogen Handle handle. They direct the nitrogen...
+

$8.95
Liquid Flux Organic Acid Water-Soluble in 6ml (0.2oz) Refillable Pen with tip and brush Specifications Flux Type: Water Washable Liquid (for Leaded...
+

$41.00 $36.90
Heating element for 55N
+

$8.95
Liquid Flux Alcohol-Based No-Clean in 6ml (0.2oz) Refillable Pen with tip and brush Specifications Flux Type: No-Clean Liquid (for Leaded and...
+

$8.95
Liquid Flux Water-Washable in 6ml (0.2oz) Refillable Pen with tip and brush Specifications Flux Type: Water Washable Liquid (for Leaded and...
+

$23.00 $20.70
SCH is a practical and stable holder. Up to 16 cartridges/tips can be stored. It is suitable for the following ranges: C120, C210, C245, C250, C420,...
+

$36.00 $32.40
The suction cups can be adjusted to the needles in order to make the placement of SMD to different sizes on board easier. These accessories allows the...
+
Product filters Product filters