Soldering

Soldering Stations sold by HEI

Howard Electronic Instruments is a worldwide distributor of soldering stations, soldering tools, and soldering irons by Xytronic, JBC Tools, Jovy, Atten, DEN-ON Instruments, EDSYN, and Goot manufactures. We also have all soldering tips, soldering handpieces, soldering stands, soldering parts, soldering pots, soldering fume extractors, butane soldering irons, and soldering accessories for all the soldering stations we sell.

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 0.7 - 0.8 mm. This Guide Kit suits for the SFR SolderFeeder and...
+

$37.00 $33.30
The LS1100 stand for classic series adapts to 14ST soldering iron when not in operation. As all JBC classic stands, it protects from heating and offers a...
+

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 1.2 - 1.5 mm. This Guide Kit suits for the SFR Solder Feeder and...
+

$24.77
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$79.95 $74.19
Chip Quik 991 Series Thermally Stable Solder Paste No-Clean Lead-Free SAC305 in 500g jar. Revolutionary Formula: No Refrigeration Required! Alloy:...
+

$15.00 $13.50
Replaceable grips that prevent the finger from sliding down the handle. Offer a pleasant and comfortable feel and facilitate the handling of any small or...
+

$310.00 $279.00
Without solder wire perforation. It is compatible with solder wire diameters of ø 0.9 - 1.0 mm. This Guide Kit suits for the SFR Solder...
+

$180.00 $162.00
FAE020 50 mm Flexible Arm for JBC Tools FAE1-1B Fume Extractor
+

$118.00 $106.20
For 230V power supply Fast heating reaches 250°C in approx. 45 seconds. It is an ideal tool for on-site repairs, or when a quick and powerful heat...
+

$310.00 $279.00
With solder wire perforation. It is compatible with solder wire diameter ø 0.8 mm. This Guide Kit suits for the SFR Solder Feeder and its...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 0.9 - 1.0 mm solder wires. You can easily change the guide set depending on the solder...
+

$13.00 $11.70
FL-A is a flux brush designed to be used in the preparation of printed circuits prior to soldering an SMD component, especially flat pack integrated...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 1.2 - 1.5 mm solder wires. You can easily change the guide set depending on the solder...
+

$33.00 $29.70
Replacement for pre-filter. JBC Fume Extractor FAE1 features a compact three-layered filter The combination of the three-layered filter system...
+

$10.00 $9.00
Cap replacement for FAE030 and FAE040 .
+

$41.00 $36.90
Tweezer nosed pliers with ESD safe hand grips for precision jobs. An ultra-precise needlenosed pliers capable of grasping and holding wire less...
+

$38.00 $34.20
The Kapton Tape allows you to fix the Thermocouples on the PCB. Adhesive tape with silicone resin, high heat resistance and excellent solvent...
+

$565.00 $508.50
Indispensable for using the AL system while having both hands free. For this purpose it is also necessary to use the pedal set Ref:0964551
+

$45.00 $40.50
This is specially designed for soldering cables and connections up to 0.8 mm in diameter. This cartridge is similar to the C245-760, but it has a...
+

$250.00 $225.00
Guide set for the SF280-A Solder Feed Handle compatible with Ø 1.0 mm single-core solder wires. With a small blade that perforates the solder wire...
+

$310.00 $279.00
With solder wire perforation. It is compatible with solder wire diameter ø 1.5 mm. This Guide Kit suits for the SFR Solder Feeder and its...
+

$60.00 $54.00
Heating element for 150S soldering iron
+

$9.95
Water-Soluble Tacky Flux for Stained Glass Soldering. Low viscosity. Specifications Flux Type: Synthetic Water-Soluble for Stained Glass Soldering...
+

$1.99
5 ft of 2.8mm solder wick desoldering braid- No Clean
+
Product filters Product filters