Soldering

Soldering Stations sold by HEI

Howard Electronic Instruments is a worldwide distributor of soldering stations, soldering tools, and soldering irons by Xytronic, JBC Tools, Jovy, Atten, DEN-ON Instruments, EDSYN, and Goot manufactures. We also have all soldering tips, soldering handpieces, soldering stands, soldering parts, soldering pots, soldering fume extractors, butane soldering irons, and soldering accessories for all the soldering stations we sell.

$29.95
Co-Solvent Low Evaporating Flux Remover Specifications Boiling Point: 175-215C Flash Point: 77C Vapor Pressure: 0.1kPa Liquid Density:...
+

$8.95
Liquid Flux Alcohol-Based No-Clean Water-Washable in 6ml (0.2oz) Refillable Pen with tip and brush Specifications Flux Type: No-Clean Water-Washable...
+

$7.95
Water-Soluble Tacky Flux for Stained Glass Soldering. Low viscosity. Specifications Flux Type: Synthetic Water-Soluble for Stained Glass...
+

$4.60
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$65.31
No-Clean Synthetic Flux Core - The clear, non-corrosive, non-conductive residue is meant to be left on the board. - 2.0% flux core - Halogen...
+

$59.99 $53.60
- Extruded High Reliability Solder Bar - Manufactured Specifically for High Quality Electronics Manufacturing (EMS, ECM, OEMs) - Designed for...
+

$490.00 $441.00

TIA-A JBC Tools Thermometer for Soldering Iron Calibration

+

$5.74 $5.00

81-02-00 Den-on Collar for the SS-8200

+

$5.74 $5.00

DEN-ON 82-03-00 HEATER HOLDER

+

$5.74 $5.00

82-04-00 Den-on Protection sleeve for SS-8200

+

$8.31 $7.00

82-05-00 Den-on Socket for SS-8200

+

$5,550.00 $4,950.00

POT-400C Goot Lead Free Large Solder Pot

+

$30.59 $26.00

DEN-ON 83-30-00 (ST-2A) STAND FOR SOLDERING PENCIL

+


$1,500.00 $1,350.00

DME-2A, JBC Tools Quad Soldering Station

+

$137.00 $123.30

T470-FA Thermal Insulation Handpiece

+

$146.00 $131.40

T470-SA Handpiece with 3M of Cable

+

$146.00 $131.40

T470-ZA Tri-Lobed Handpiece

+

$69.00 $62.10

JBC F3449 3449 Fume Extractor accessory for T245 handpiece 4mm

+

$97.00 $87.30
The fume extractor for AL250 is an easy & safe solution to suck the fume generated at the solder joint. It is supplied with all necessary pieces to...
+

$93.00 $83.70

JBC F6457 Fume Extractor accessory for T245-C Comfort Handpieces

+

$32.89 $28.00

79-206522U Xytronic Heating Element.For use with Xytronic 70W Soldering Irons

+

$15.30 $13.00

DEN-ON 80-01-01 CONICAL STANDARD

+

$17.59 $15.00

DEN-ON 80-01-02 SOLDERING TIP

+

$14.15 $12.00

DEN-ON 80-01-03 SCREWDRIVER TIP

+

$17.59 $15.00

DEN-ON 80-01-04 CONICAL SOLDERING TIP

+

$18.74 $16.00

DEN-ON 80-01-05 CONICAL FINE

+

$17.59 $15.00

DEN-ON 80-01-06 SCREWDIVER SMALL

+

$21.22 $18.00

DEN-ON 80-01-09 CONICAL ANGLED MED.

+

$8.41 $7.25

DEN-ON 81-01-03 BEVEL 3MM SOLDERING TIP

+


$8.41 $7.25

DEN-ON 81-01-08 BEVEL 3MM FULL TIN 5MM

+

$9.37 $8.02
EDSYN HT01 REPLACEMENT TUBE
+

$20.46 $17.50
EDSYN LT336A HD TIP THREADED
+

$8.80 $7.50
EDSYN LT431 MIDLENGTH SPADE TIP
+

$29.45 $25.03
EDSYN LT434 SMD HOT AIR MEDIUM FAN TIP
+

$55.10 $42.40
EDSYN LT436 HOT AIR FAN TIP
+

$9.00 $7.50
EDSYN LT439-1 LONER ANGLED CONICAL TIP
+

$113.99 $96.75
EDSYN LT447 QUADRA-FLOW HOT AIR TIP
+

$113.99 $96.75
EDSYN LT449 QUADRA-FLOW HOT AIR TIP
+

$113.99 $96.75
EDSYN LT458 QUADRA FLOW HOT AIR TIP
+

$113.99 $96.75
EDSYN LT460 QUADRA-FLOW HOT AIR TIP
+

$30.41 $25.80
EDSYN LT510 HOT AIR TIP .06" HOLE .65"LONG
+

$30.41 $25.80
EDSYN LT511 LONER BENT HOT AIR TIP
+

$30.41 $25.80
EDSYN LT512 CURL BENT HOT AIR TIP .07".90"
+

$34.04 $29.00
EDSYN LT535 SMD HOT AIR TIP
+

$14.15 $12.15
EDSYN LT771 ANGLE CUP SOLDERING TIP .06 IN
+

$9.95 $8.50

PX-2RT-4C Goot Soldering Iron Tip

+
Product filters Product filters