Black ESD Foam, Lead Insertion Grade, 18" x 12" x 1/4".
Designed for IC leg and pin insertion. Can also be used for blocking, bracing, cushioning and wrapping sensitive electronic devices.
Crosslinked high-density polyethylene, rigid, closed-cell, carbon loaded, conductive, surface resistance 1x10^3 to 1x10^5 ohms/square.
Specifications:
Foam Type: Crosslinked high-density polyethylene, rigid, closed-cell, carbon loaded, conductive
Surface Resistance: 10^3 to 10^5 ohms/square
Dimension: 18" x 12" (457.2 x 304.8 mm)
Thickness: 0.25" (6.35 mm)
Dimensional Tolerances: +/- 2%
WARNING! This product can expose you to Carbon Black, which is known to the State of California to cause Cancer. For more information, go to: www.P65Warnings.ca.gov. This material
is embedded in the product and is not available as respirable dust. When used as intended or as supplied, the product will not pose hazards.
