Howard Electronic Instruments Soldering and Desoldering
|
Hot Products
Xytronic Soldering & Desoldering Station
Only $299.00
Buy of the Year
HG3002LCDKIT
Heat Gun Kit
Sale $149.00
 |
|
|
Xytronic LF-8800 Soldering & Desoldering Station
Lead-Free ESD Safe
INTELLIGENT TEMPERATURE
CONTROLLED STATION |
|
Tech Note: Xytronic has proven to be
a leader in the field of soldering and desoldering and has consistently
produced products that have a track record for reliability, safety,
value for the dollar, ease of use, and supreme satisfaction from our
customers. |
|
|
Xytronic New Style
LF-8800
Lead-Free
Digital
Soldering and Desoldering Station
Including 426DLX Fume Extractor
Large Image
New Low Price LF-8800
Reg. $495.00
Sale $395.00
See LF-8800 with Hot Tweezers and Hot Air Pencil
ESD Safe with Zero Switching
Separate stand with built-in tip cleaner
|
Product Features
1.
HEATER/SENSOR FAILED DETECTION:
If sensor circuit failed that the display reads "S--E" and cut off the
heater power. If heater circuit failed the display will read "H--E" and
cut off the heater power.
2. TEMPERATURE “LOCK-OUT” FEATURE: The temperature can be
locked by “password” code that is convenient for production line
management.
3. ESD SAFE AND SPIKE FREE CIRCUITRY: The “Zero Voltage”
electronic switching design also protects voltage and current sensitive
components (CMOS devices, etc.) against damaging current and transient
voltage spikes commonly produced by less efficient, mechanically
switched stations.
4. DELAYED SUCTION: To eliminate the problem of solder
clogging up the tip, a delayed switch feature has been incorporated for
the unit that allows the pump to continue sucking for 1.5 seconds after
the actuator switch is released.
5. LIGHTWEIGHT SOLDERING IRON: Ergonomic mini handle that stays
cool and prevents operator fatigue.
6. ENERGY SAVER MODE: If the station has been idle for 20
minutes, the energy saver feature will automatically engage, the
temperature goes down to 150°C
from the set temperature. Activating the solder/desolder wands will
disengage the power saving feature and the unit will immediately ramp up
to the preset temperature. When over 40 minutes without operation the
main power will be switched off to “sleep mode” which cuts power
consumption and extends tip life.
Please note: You have to switch off the unit first and then switch
“ON” again to commence work when the unit goes to “Sleep” mode.
7. IRON WORKING OPTION: Both soldering, desoldering irons
can be used at the same time. You can also set by pressing keys “ SET +
▲” when you only use soldering or desoldering iron. At this time, the
iron which you set will enter the power off suspend status. It means
that the heater power is cut off. If press “▼＂then the heater power will
be on.8.
OPTIONAL SMD TWEEZERS : The additional feature is specially
designed for SMD chips, SOT, Flat pack ICs’ etc. reworking.
TWZ90
Tweezers can be interchangeable with soldering iron as an option. Be
sure before proceeding this operation, the main switch must be “OFF” to
avoid any damage to the unit. Holder with Built-in Tip Cleaner (Great Deal)
|
|
LF-8800 operates with
the high power 32V/100W output that is specially designed for lead-free
soldering/desolderin g
works to meet RoHS requirement. This unit built in a self-contained, oil
free, maintenance free, and quiet running vacuum pump which is
electronically controlled and will not overload with continuous use,
eliminating the need for additional shop air. The vacuum pump provides
up to 50cm/Hg (20in/Hg) suction power, activated by a push button
switching circuit located on the desoldering wand. Internal solder
collector in handpiece is quickly and easily removed for cleaning. The
inside mesh aluminum cooling strip has better solder chip adherence.
Also the ventilation slots makes for a cooler handle, improving operator
comfort.
LF-8800 incorporates electronic circuitry which enables the user to set
the soldering tip temperature from 150°C (302°F) through 480°C (896°F)
and desoldering tip temperature from 300°C (572°F) through 450°C (842°F)
without changing tips or heating elements. Also, with digital display
readout and pressing keys on the front panel get clear vision and
comfortable setting. The temperature is maintained within ±3°C (±6°F)
of its operating temperature by a thermocouple sensor to ensure maximum
temperature as close to the working surface of the tip as possible. This
results in both a rapid heat up, fast recovery and exacting temperature
control with minimal overshoot. |
|
|
Specifications:
 |
|
|
EASY TO
READ |
ISOLATED
& HIGH IMPACT |
| The Intelligent LF-8800 provides an
"Easy to Read" Digital temperature indicator, a detachable 100W
solder wand complete with tip, and a "Set and Forget"
temperature control that allows a precision accuracy "On
Demand" heat setting range of between 200 °C and 450 °C (392°F
to 842°F ). |
The power unit is isolated from the A.C.
line by a high quality transformer and only 32 VAC voltage is used to
drive the heating element. The tough plastic PC housing is stronger to
better withstand high impact bumps and abrasions. All materials meet UL
standards. |
|
ESD
SAFE |
SLEEP MODE AND POWER OFF STATE |
| The Intelligent LF-8800 exceeds all soldering equipment
military specifications regarding electro static sensitive devices for
critical applications where unwanted static discharges may damage
components. |
When soldering is suspended
for 20 minutes, the soldering iron will go into a sleep mode with a
temperature of 200°C. After 40 Minutes of
Sleep without Wake-Up, the heater will power off to save energy, protect
the soldering tip and guaranteeing safety. |
|
TEMPERATURE
STABILITY |
CERAMIC HEATER |
| Precision "Tip Temperature"
Accuracy is mastered to within ± 3°C(6°F) utilizing state of the art
circuit technology and a built in P.T.C. sensor, located at the end of
each ceramic heater shaft for accurate temperature control. |
The ceramic heater has the advantages of
high power, long work life, fast temperature recovery and fast
temperature compensating, which is more advantageous for lead free
soldering. |
|
LIGHTWEIGHT
SOLDERING IRON w/Burn Proof Cord |
LOCK-OUT
FEATURE |
| Ergonomic mini handle that stays cool .
Handle assembly cord is made from silicone rubber that won't be damaged
when coming into contact with high temperature irons.
|
The soldering temperature can
be
locked by a password and is convenient for production management. |
|
|
|
|
|
|
Howard Electronic Instruments, Inc. Address and Information
Copyright © 1996 - 2013 Howard Electronic Instruments, Inc. All rights reserved.
Current date CST:
05/25/2013
|
|
|
|
Xytronic Products
Print this page
Soldering Stations
LF-369D
LF-1600
LF1680
LF-1000
LF-2000
LF-3000
Soldering Tips
Desoldering Stations
LF6000
Desoldering
Tips
Solder/Desolder Stations
Most Popular 988D
NEW LF8800
LF7000TP
LF8800TP
LF8800LF852DTP
Soldering Tips
Desoldering
Tips
SMD Stations
LF-853D
LF-853DTP
LF855D
LF8800LF852DTP
852DIR610TP
Hot Air Station
LF-852D
IR Systems
HEI-IR860
IR610 PreHeater
Fume Extractors
426DLX
456DLX
HV-2E
Handpieces
107ESD
108ESD
208ESD
210ESD
DIA60A
DIA80A
DIA100
TWZ60
TWZ90
TWZ100
Tips
Soldering Tips
Tweezer Tips
Stands
Stands
Solder Holders
Magnifiers
Work Lights
Accessories
191
236
253
459
Pliers
PRKIT
XY-001
450 Fluid Pump
460 Tip Cleaner
490 IC Popper
TWTP Tweezers
ESD Wriststraps
Homepage
Vendors
About
|
