Click Image for Enlarged Image

LF6000 Desoldering Station
Lead-Free  $299.00

Includes Tip Cleaner, Stand and Solder Spool Holder shown above.

 Soldering, Desoldering and SMD Tip Sizes
We get Letters from Satisfied Customers

Check our Soldering & Desoldering Accessories Page

• LEAD FREE:  The heater is a more powerful and safe 32V, 80 watt heater for faster recovery time on lead-free solder.
• ENERGY SAVER: Automatically powers down desoldering tool heater after 15 minutes of idling indicated by the Pause LED-saving power while extending tip life. To power the heater back up, simply pick up the desoldering wand as it has a motion detector built-into the wand.
• DELAYED SUCTION: Desoldering Pump will continue sucking for 1-2 seconds after actuator is released - This  clears the tubes and prevents clogging of the desoldering tip.
• DIGITAL DISPLAY: Large, easy to read Digital Display  of the Temperature. Set/Read switch is convenient and easy for reading your set temperature and tip temperature.
• CONVENIENT CELSIUS/FAHRENHEIT SWITCH gives you the readings you are most familiar with.
• Fast Front Calibration Port Allows fast calibrations from the front of the unit.
  
  LF-6000 Manual .pdf

STANDARD FEATURES:

• READ OUT:
  Large Easy to Read digital temperature display.
• TEMPERATURE STABILITY:
  Tip temperature accurate to within ±3°C (6°F)
• SPIKE FREE CIRCUITRY:
  Zero Voltage switching and fully grounded design makes this unit safe on electro-sensitive devices.
• ELECTRONIC TEMPERATURE CONTROL:
  Adjustable Temperature w/o changing tips.
• VACUUM SWITCH:
  Suction is controlled by a finger actuated thyristor circuit located for ease of operation on the desoldering handle.
• PUMP:
  A self-contained diaphragm vacuum pump engineered to provide continuous, maintenance free operation.
• ISOLATED POWER SUPPLY:
  Powered by a high quality 32Va.c. transformer.
• OPTIONAL HOT-AIR PENCIL HAP 80 for SMD SMALL CHIPS, SOT REWORK

SPECIFICATIONS:

Mains power Voltage AC.	120V or 230V as Requested
Iron assembly	Desolder Iron	Hot-Air Pencil (optional)
Part #	DIA80A	HAP80
Heater output	32Va.c.	32Va.c.
Heater power	80W	80W
Vacuum pump operating voltage	115Va.c. for 100-120V 230Va.c. for 220-240V mains power
Temperature range	300-450°C 572-842°F	Max. 350°C 662°F
Dimensions (WxLxH)	220 x 285 x 122 mm 8.7 x 11.25 x 4.8 in
Net weight (excluding optional accessories)	5.3 Kgs (14.3 lbs.)