|
Steinel Nozzles
for
Electronic Heat Guns
HG2510ESD -
HG2310LCD -
HL2010E
- HL1910E and all electronic heat
guns with an O.D. of 1 1/4" or 31mm |
Part # 7301 $21.40
75mm (3") reflector nozzle with a 1-1/2" reflector for large diameter
shrink tube applications. The reflector can be adjusted to efficiently
shrink small diameter tubing . |
 |
|
Part #7051
$15.20
39mm reflector nozzle with a 1-1/2 reflector for medium diameter
shrink tube applications. The reflector can be adjusted for smaller diameter
tubing. |
 |
|
Part #7461
$16.99
14mm (5/8") reflector nozzle with a specially designed tip to provide
efficient and quick heat to solder sink wire connectors. This is a totally
enclosed nozzle with no vents for deflecting excess hot air into the working
area. |
 |
|
Part #7061
$25.70
9mm (3/8") reflector nozzle with a 1-1/2" reflector that can be easily
formed for shrinking small diameter tubing. This is a totally enclosed
nozzle with no vents for deflecting excess hot air into the working area.
The reflector is removable to allow application of direct pin point heat to
a surface. |
 |
|
Reduction
Nozzle
Part #
7062 - (3/8") 9mm $14.79
Provides a totally concentrated pin point air flow. |
 |
|
Reduction
Nozzle
Part #
7071 - (5/8") 14mm $15.20
Provides a totally concentrated pin point air flow. |
 |
|
Reduction
Nozzle
Part #
7081 - (3/4") 20mm $15.20
Provides a totally concentrated pin point air flow. |
 |
|
Wide-Jet Nozzles
Spreads hot air over a wider area for drying, shaping plastic, heating
large surfaces, etc.
Part # 7011 $15.20
50mm Surface Nozzle
Part # 7021 $15.20
75mm Surface Nozzle |
 |
|
40 mm (1"-1/2" Slit Nozzle)
Part # 7471 $24.99
For lap welding PVC sheeting and roofing material. To be used with
Item 07071. |
 |
|
75 mm (3") Heat Disc
Part # 7211 $26.11
Teflon coated disc for heating PVC pipe for butt welding. To be used with
Item 07071. |
 |
|
20 mm (3/4") Slit Nozzle
Part # 7101 $15.20
For lap welding plastic materials. To be used with Item 07062. |
 |
|
Plastic Weld Nozzle
Part # 7091 $20.10
For working with flexible plastic welding wire. To be used with Item
07062.
Instructions
for Plastic Welding with this nozzle
Plastic Welding Rods |
 |
|
Deflector Nozzles
Protects adjoining surfaces from overheating, such as panes of glass and
corners.
Part # 7031 $15.20
50mm Window Nozzle
Part # 7041 $15.20
75mm Window Nozzle |
 |
|
40mm Angle Slit Nozzle
Used for welding single ply roofing materials and plastic sheets.Part
# 7511 $53.60
|
 |
|
Wire Protection Tube
Prevents accidental contact with hot nozzles. It only fits on the new
series of heat tools (HG2510ESD, HG2310BB, HG2310LCD, HL2010E, HL1910E,
HL1810S and HL1610S).Part # 7403
$17.50
|
 |
|
Flexible Stand with Magnetic Base
Magnetic base keeps stand in place while working. Flexible arm allows
user to adjust gun to the optimal working position.Part # 1400
$31.99
|
 |
|
Stand
Part# 1410
$39.10
Metal
Stand can be used along with 3" reflector to apply a warm air bath to
the bottom of the PCB. Chip Quik Alloy can
then be used for very low temperature removal of SMD's. Board preheating can also
be applied when replacing SMD's. Stand only works with the newer models of heat
guns (XX10 models). |
 |
|
Plastic Welding Rods
All types are shipped with 16 rods to a packet.HDPE Plastic Welding
Rods
Part # 7121 $8.90
|
 |
|
Plastic Welding Rods
All types are shipped with 16 rods to a packet.
Rigid PVC Welding Rods
Part # 7311 $8.90
|
 |
|
Plastic Welding Rods
All types are shipped with 16 rods to a packet.
LDPE Plastic Welding Rods
Part # 7331 $8.90
|
 |
|
Plastic Welding Rods
All types are shipped with 16 rods to a packet.
PP Plastic Welding Rods
Part # 7341 $8.90
|
 |
|
Plastic Welding Rods
All types are shipped with 16 rods to a packet.ABS Plastic Welding Rods
Part # 7421 $8.90
|
 |
|
| Heavy-Duty Carry Case Part#40100
$42.20
Fits models: HG2510ESD, HG2310BB, HG2310LCD, HL2010E, HL1910E, HL1810S
and HL1610S. |
 |
|
