Specialty Tools and Accessories

CAPWIZ Capacitor Wizard ESR Tester ( CAP1B ) by Midwest Devices

Capacitor Wizard ( CAP1B & CAPSVR ) by Midwest Devices with the CapWizSaver Installed

350 Panavise Multi-Purpose Work Center

324 Panavise Electronic Work Center

201 Panavise PV Jr. Combination Vise Head and Base

396 Panavise Wide Opening Head

Virtual Industries TV-1000 Tweezer Vac System 110V - Includes a 5' coiled hose (VCH-5/64-5), Set of nine vacuum tips (VCS-9-B), Vacuum handle

Helps protect against accidentally damaging the Capacitor Wizard® by attempting to test charged capacitors. Make a habit of following good service practices and discharge all capacitors before attempting a test - even if you install the CapSVR. Always remove power from the circuit under test.

TV1000-SP8-BD Tweezer Vac System 110V-BD - Includes a 5' coiled hose (VCH-5/64-5), Set of nine vacuum tips (VCS-9-B), Vacuum handle (VVP-200), Small Parts Tips (VSPT-KIT-8-BD), Tip holder (VTH-16) and power cord.

Auburn Technology P-20B RF Probe is a High frequency RF measurements

TV-1000-220 Tweezer Vac System 220V - Includes a 5' coiled hose (VCH-5/64-5), Set of nine vacuum tips (VCS-9-B), Vacuum handle (VVP-200)

DTV-2000 Dual Tweezer Vacuum System 110V - Includes two 5' coiled hoses (VCH-5/64-5), Set of nine vacuum tips (VCS-9-B), Vacuum handle (VVP-200)

Chip Quik SMD291 CHIP QUIK FLUX

MidWest Devices CapKit Repair Kit is available if you accidentally check a charged or powered up capacitor you may damage the Capacitor Wizard®. This CAPKIT

SMDSG10CCR 10CC Syringe Dispensing Gun

ChipQuik SMDSW.031 4oz No-Clean Solder Wire 63/37 Tin/Lead

V8920E-LMS-ESD Virtual Industries Pen-Vac Pro Series Vacuum Pen

ChipQuik SMDSW.020 4oz No-Clean Solder Wire 63/37 Tin/Lead

Chip Quik SMD291NL 5cc (5 Grams) Syringe of Lead-Free Flux

333 Panavise Rapid Assembly Circuit Board Holder

HV-KIT-ESD Virtual Handi-Vac Vacuum Tool

Chip Quik SMD291ST2CC6 2cc Squeeze Tubes Flux $13.95

MidWest Devices CapMeter replacement is a full analog replacement meter movement.

MidWest Devices CW1B-PR Replacement Capacitor Wizard® probes complete with cable.

This is a very useful aid to the Electronics Industry for inspection, removal and replacement of Surface Mount Components.

311 Panavise Bench Clamp Base Mount

301 Panavise Standard Panavise

Panavise 209 Precision Vise w/vacuum base

315 Panavise Circuit Board Holder

376 Panavise Self-Centering, Extra Wide Opening Head

VSPT-KIT-8-BD Deluxe Small Parts Kit 8 Bent Delrin Tips

VSPT2010-BD Virtual Industries Delrin ESD safe tip

BVJ-038-ESD Virtual Industries BULBVAC Bulb Type Vacuum Pickup Tool (ESD Safe)

VSPT-0803-BD Small Part Tip Beige ESD Safe Delrin Bent 0.008

Qualitek NC600-LF96530-010 Qualitek NC Wire SAC 305, .010 1.1% 1lb.

V9013-ESD Virtual Industries 1/8" (3.18mm) diameter vacuum cups

Virtual Industries HV-KIT-II-ESD Pick up tool with five probes and cups.

V9018-ESD Virtual Industries 3/16" vacuum cup

VSPT3020-BD Virtual Industries Delrin ESD safe tip

VBM-3 Virtual Industries Vacuum Pen Holder with posts to accommodate up to eight of our luer slip vacuum tips. Can be used with any of our vacuum handles or vacuum pens.

HV-KIT-II-B Virtual Industries HANDI-VAC KIT With 5 Probes & Cups - ESD-Safe - Three bent 1/8" (3.18mm), 3/16" (4.76mm),1/4" (6.35mm) and two straight 3/8" (9.53mm),1/2" (12.7mm) diameter Static Dissipative Buna-N Cups

HV-X Virtual Industries HANDI-VAC Without Probes or Cups - Includes box.