CD-1BE JBC Tools soldering station with the JBC Advanced system for general electronic applications. It works with the JBC exclusive heating system and the intelligent sleep & hibernation features. The JBC Tools CD-1BE soldering station comes with handpiece (T245-A), and two cartridges (C245-903 and C245-741). The CD-1BE JBC Tools soldering station is the best station sold on todays market.
CLICK HERE to see JBC Tools exclusive Low Temperature Soldering and cartridge replacement.
CD-1BE JBC Tools Digital Lead-Free Soldering Station
CD-1BE JBC Tools advanced compact station incorporating JBC Technology in one self-contained unit with a new display and USB Connector for software updates. The JBC Tools CD-1BD intelligent sleep and hibernation functions, which help extend tip life and save energy, works so well because JBC's extremely fast temperature recovery, rivaled in the market. The CD-1BE JBC Tools Soldering Station control units feature large high-contrast graphic displays that show important information at a glance.
CD-1BE JBC Tools Soldering Station Control Unit
CD-1BE JBC Tools soldering station features large graphic display that shows important information at a glance. Any changes to the original settings can be easily made via menu on the display. The CD-1BE JBC Tools soldering station is the best soldering station sold on todays market.
JBC Tools CD-1BE Soldering Station Stand
CD-1BE JBC Tools stand is incorporated in the housing with the control unit for easy handling.
Complete Cleaning System with an Antisplash Membrane
JBC Tools CD-1BE uses the integrated wiper to remove excess solder from the tip and to keep work area clean
CD-1BE Product Composition
Control Unit: CD-1BE with tip cleaning system
Tools: T245-A General Purpose Soldering Handle
Cartridges: C245741, C245903
Consumables: S0354 Sponge, CL6210 Brass Wool
What is the Correct Temperature for Soldering?
Purchase a JBC Tools CD-1BE Compact Soldering Station Today!
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, MG Chemicals, Pana Vise, Qualitek, Steinel, Scienscope, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.
The Thermal Load Tester is for testing the recovery time of soldering stations and soldering irons. The process starts by placing the hot soldering iron tip on pad number one of the tester, which also starts a timer. Each pad is 10mm in diameter and approximately 2mm deep. There are 10 pads and you cannot continue to the next pad until you get a green light. After receiving a green light on the last pad, the timer stops automatically. The time recorded is the time that it took to reflow all 10 solder pads while getting the green light on each pad. If a green light is not earned on all pads (meaning that you had complete reflow on that pad), then the time is abolished for that test and you must start all over with the test.
This is the most accurate test that I know of for evaluating the recovery time of a soldering station. It is a very important test, where time is a factor in your decision for purchasing a quality soldering station, such as in manufacturing, technical service, etc.