Save 47%
Goot - POT-100C

POT-100C Goot Solder Pot

List price: $1,999.00
$1,050.00
You save: $949.00 (47%)
Price in points: 1050 points
POT-100C
+

Goot Pot-100C is especially suitable for preparatory soldering of relatively large parts, solder-dipping of large terminals, urethane wires, connectors, and big wire leads.

Goot POT-100C Solder Pot sold by Howard Electronics


Perfect Temperature:

PID temperature control minimizes deviation of solder or setting temperature.

Dual Display:
Dual digital temperature display shows set temperature and measured temperature values at the same time.
Extremely Accurate:
Extremely accurate setting value and measured value at very minimal tolerance as {(display value x 1.25%)+1C}
Stainless Steel Solder Bath: Not recommended for lead free solder.
Preparatory Soldering: (Patent Pending)
Suitable for preparatory soldering of relatively large parts, solder-dipping of large terminals, urethane wires, connectors, and big lead wires.
Warning Lamp:
Warning lamp to detect any deviance from set temperature range.
Separated structure:
Separated structure of solder bath and heater allow simple replacement of each part.



Model POT-100C POT-103C POT-200C POT-203C
Voltage 110V,120V, 220V,240V AC 50/60Hz 110-120V, 220-240V AC 50/60Hz 110V,120V,220V,240V AC 50/60Hz 110-120V, 220-240V AC 50/60Hz
Power Consumption 440W 900W 650W 1400W
Max. Temp. 350°C 450°C 400°C 450°C
Set Accuracy ±{(1.25% of display temperature)+1°C}
Heater Nichrome Heater Sheath Heater Nichrome Heater Sheath Heater
Control System PID Control
Power Cord Length 1.3m 1.5m 1.3m 1.5m
Solder Bath Material SUS316 Cast Iron SUS316 Cast Iron
Max. Solder Volume Approx. 5.5kg Approx. 3.5kg Approx. 9.5kg Approx. 7kg
Dimensions 360(W)×124(H)×220(D)mm 450(W)×124(H)×220(D)mm
Solder Bath Dimensions 91(W)×
60(H)×
135(D)mm
82(W)×
53(H)×
110(D)mm
180(W)×
60(H)×
130(D)mm
173(W)×
53(H)×
108(D)mm
Weight 5kg 8kg 7kg 11kg


Purchase a Goot POT-100C Solder Pot Today.

Vendors :
Goot
Frequency:
50/60Hz
Output:
440W
Solder Bath Dimensions:
91x135x60mm
Weight:
Approx. 4kg
Max. Solder Volume:
Approx. 5.5kg
Solder Bath Material:
Stainless Steel
Set Accuracy:
±{(1.25% of display temperature)+1°C}
Power Cord:
1.5m (3 core cable) / ground plug : POT-100C/200C
Accessory :
PCB Dipping Holder PCB-1