|
|
|
 |
JBC
AM7000SMD Complete Rework Station -
Includes
JT-1A Hot Air
Station, DM-1A Quad
Soldering/Desolderingtation,Station,
MS-1A
Desolderingump,Pump,
T245
Handpiece,
T210
Handpiece,
PA-A Micro Hot Tweezers,
Stands,
Cartridges and accessories. See the
complete
repair process with the JBC AM7000SMD.
Your Price
$5495.00 |
|
|
 |
JovyE-7500 Infrared
BGA Rework StationRE-7500 Infrared
BGA Rework Station
Flexible uses for most components including SMD,
BGA CBGA, CCGA, CSP, QFN, MLF, PGA, Epoxy
underfille, µBGA The, µBGA The JovyE-7500 uses complete
reworking processes, including pre-heating,
soaking, re-flow & cooling stages are achieved
for an accurate and standard reworking processRE-7500 uses complete
reworking processes, including pre-heating,
soaking, re-flow & cooling stages are achieved
for an accurate and standard reworking process
Your Price
$2200.00 |
|
| |
 |
DEN-ON SD3000II SMT Rework Station
This rework system is designed to
remove most SMT components like QFPs,
SOPs, PLCCs, SOJs, PGAs, BGAs,
Connectors and other chips. It does not
require any special nozzles or
additional accessories. Built in timer
to prevent overheating of board and
component. The hot air nozzle has an
adjustable motion range of up to 50mm
per axis
Your Price
$6900.00 |
|
|
 |
HEI-IR860 IR
rework
It's here now
- Uses Infra Red Rework Technology above and
below the board for State of the Art Rework. No
airflow to blow parts around. Economical and
easy to use for all operators. Nothing else to
buy.
Your Price
$1695.00 |
|
| |
 |
JT-1A High Power
Hot-Air Station -
The JT-1A is a high power hot air station used
for desolderingll types of SMDs. Its powerful
heater enables quick and safeall types of SMDs. Its powerful
heater enables quick and safe desolderingf
even the biggest QFPs and PLCCs. In addition, itof
even the biggest QFPs and PLCCs. In addition, it
desoldersmall and medium sized BGA’s in a very
reduced time span. Digital read-out temperature
allows more precision and tool control.small and medium sized BGA’s in a very
reduced time span. Digital read-out temperature
allows more precision and tool control.
Your
Price $1820.00
|
|
| |
 |
TE-1A Precision Hot-Air
Station - The
TE-1A is a precision hot air station ideal, for
desolderingnd soldering small and medium sized
SMD’s by hot-air. It takes about 30 seconds toand soldering small and medium sized
SMD’s by hot-air. It takes about 30 seconds to
desolder a medium sized component, quick enough
to prevent the substrate and component from
heating up to a dangerous temperature.
Your
Price $1680.00
|
|
| |
|
XytronicF8800852DTP Completely Self-containedLF8800852DTP Completely Self-contained
Lead-Free High
Power Rework Station
Includes
LF8000, 852D (High
Power), TWZ80 hot tweezers, HAP80
hot-air-pencil, Stands with Tip Cleaner, 490 IC
Popper, 480 Cleaning Brush and more
HEI and Xytroni, bringing you quality tools
within your budget., bringing you quality tools
within your budget., bringing you quality tools
within your budget.
Your Price
$799.00
|
|
| |
 |
RMST Rework Station
for rework and repair of
through-hole and SMT boards. It contains three
modules that cover the main rework tasks: Hot
air to desolder any size of SMD component. The
station uses the exclusive JBC system, based on
protectors-extractors and hot-air flow which
makes desoldering safe, clean and quick,
concentrating the heat on the IC, and protecting
the rest of the circuit at the same time.
Desoldering SMTs and cleaning through-hole
components, and pads by using the desoldering
iron DR-A.
Your Price
$3740.00
|
|
| |
NEW
|
Xytronic LF8800TP Lead
Free Soldering, desolderin, Hot air, and
Hot Tweezers Rework Station
Xytronic's NEW Lead-Free soldering /
desoldering station with powerful 80 watt heaters, energy
saver feature, digital readout, plus hot air,
hot tweezers. and many more features.station with powerful 80 watt heaters, energy
saver feature, digital readout, plus hot air,
hot tweezers. and many more features.
Your Price
$525.00 |
|
| |
 |
Xytronic LF7000TP Lead
Free Soldering, desoldering, Hot air, and
Hot Tweezers Rework Station
with
426DLX Fume Extractor
(Your Price
$449.00)
Xytronic's NEW Lead-Free soldering / desoldering
station with powerful 80 and 100 Watt heaters,
energy saver feature, analog readout, plus hot
air, hot tweezers, 426DLX fume extractor and
many more features.
Your Price
$449.00 |
|
|
 |
Xytronic XYRework
Totally self-contained Hot Air Rework Station,
Bottom Pre-Heater and XY Rework Table, and
accessories. Your complete SMD Rework Station in
one package.
Your Price $1295.00 |
|
|
 |
Xytronic IR610 SMD Pre-Heater
for use with the 850D rework
station or any system that needs a PC Board
Pre-Heater. Successfully lowers thermal stress
and warping on PC Boards and SMD Components.
Your Price
$449.00 |
|
|
 |
Steinel HG2510ESD Hot Air Gun
This tool is the best hot air gun
on the market and is breaking it's way into the
Electronics Industry. It can be used as a stand
alone hot air gun to remove SMD's or in
conjunction with Chip Quik for Low Temperature
SMD Removal. Several
nozzles available.
Your Price
$237.95 |
|
|
|
EDSYN TSX70 This is the
machine of choice for cleaning the pads on a BGA
component prior to reballing, or site cleanup
of the PC Board prior to reinstalling a BGA
component. Used extensively by manufacturers and
subcontractors in high volume BGA rework.
Your Price
$2485.00 |
|
|
|
EDSYN 1036 Hot Air Station
Totally self-contained Industrial Grade Hot-Air
pencil. Great tool for prototyping in the
engineering lab.
Your Price
$606.00 |
|
|
|
EDSYN 1036DX Hot Air Station
A versatile and complete SMT hot
air station that adjusts to either hot air or
contact soldering techniques from the same
station.
Your
Price $1727.00 |
|
|
|
EDSYN 971HA Hot Air Station
This Hot-Air Station delivers outstanding
performance when using hot-air or traditional
CONTACT rework Techniques. (Requires Shop Air
or Nitrogen).
Your Price $897.00 |
|
|
 |
Panavise circuit board holders,
vises, bases, vacuum bases and accessories for
the electronics industry. |
|
| |
 |
Portable
Butane Soldering Irons
Perfect for
outside soldering where electricity is not
readily available. Excellent for windy
conditions. Also can be used to remove and
replace Surface Mount Components. |
|
|
 |
DEN-ON SMD Kit Part# 72-78-00
Required for Hot-Air use with the
DEN-ON SC-7000Z.
Your Price
$42.00 |
|
Low
Temperature Desoldering of SMD's w/ soldering
iron |
| |
 |
CHIP QUIK
Products for inexpensive removal of Surface
Mount Devices. Also see the
Xytronic 137ESDTP,
JBC
AD2950SMD, and EDSYN
951SXTP for the Complete Rework
Package for Inexpensive Removal and Replacement
of SMD's.
Your Price $14.50 |
