15th Newsletter from Howard Electronic Instruments, Inc.            July, 2002

 
Check out Three of our Hottest Items Sold on the WEB!!
 
jbc tools new products AM6000TP Complete Rework Station by JBC
 
  Scienscope Microscope Package CO-PK4-05    Fixed Stereo Microscopes from Scienscope
     Priced from $480-$800
 
 
   AD2200SMD  Complete JBC Soldering Station for Smd Rework
  * 60 day 100% Total Satisfaction Guarantee
 
AM6000TP REWORK STATION by JBC
 Truly an Advanced Complete Rework station with many innovative features not found in any other rework station

AM6000TP Complete Rework Station
AM 6000TP
Click on Image for Larger Image

AM6000TP $3600.00     

Save $285.50 from items purchased separately.

Includes all accessories normally with the AM6000, plus PA1200 micro hot tweezers, PA8120 stand, set of cartridges for hot tweezers (your choice), 10cc syringe of No Clean solder paste, 10cc syringe of No-Clean flux, 460 tip  cleaner.

View Cartridges for 2245 Handpiece
View Cartridges for 2210 Handpiece
View Cartridges for PA1200 Microtweezers

Recommended for use with the AM6000TP:
-  2245-009, 2245-010 and/or 2245-031, 2245-038
-  PA4200 Hot Tweezers
-  Micro Tweezers Cartridges
-  Hot Tweezers Cartridges

 
Go to the JBC AM6000 without the Hot Micro Tweezers

 SMD Rework Station for rework and repair of through-hole and SMT boards.
It contains 4 modules which cover the main rework tasks. Optional Micro Hot Tweezers and Standard Hot Tweezers are available with numerous cartridges. Standard Hot tweezers can also be used for wire stripping.

Hot air for desoldering any size of SMD components. The station uses the exclusive JBC system, based on protectors-extractors (See image at bottom of page) and hot-air flow, which makes desoldering clean and quick, concentrating the heat on the IC, and protecting the rest of the circuit at the same time.
A medium-sized SMD can be desoldered in less than 20 seconds. When the IC is at desoldering temperature the extractor snaps the IC upward so fast that the leads are almost completely devoid of solder. This makes replacement of the same IC very easy if you wish.

Desoldering SMTs, through hole components and cleaning of through-hole components and pads by using the desoldering iron DR 5600, which contains an independent vacuum pump.

Pick & Place vacuum pen to aid in positioning components.

Soldering of all types of components, with the swift response, power and temperature recovery of the Advanced series. You can connect the Advanced 2010, 2210, 2045 or 2245 handpieces or PA1200 Microtweezers and PA4200 Hot Tweezers to the AM6000.

  Stands for all heating units including sleep modes for the soldering and desoldering irons. Parameters can be changed by the use of the AC2600, or will be done free of charge by HEI.
SPECIFICATIONS:
Power 1150 W
Maximum power soldering iron 50 W
Maximum power desoldering iron 75 W
Power heating unit 900W
Temperature selection soldering iron: 100 - 350 ºC (200 - 700ºF)
Temperature selection desoldering iron: 100 - 350 ºC (200 - 700ºF)
Temperature selection hot air: 150 - 450 ºC (200 - 850ºF)
Air flow regulation: 6 - 45 l/min
Vacuum pump for holding ICs
Antistatic control box with “skin effect”
Weight of complete system 17,6 kg (44 Lbs)


Click here to see the repair process

AM 6000TP INCLUDES:
Control unit with air heater 1150W
Handpiece 2245 with the cartridge 2245-003
Desoldering iron DR 5600 with the tip 5600-003
Pick & Place MP 2260
Extractor stand with: 5 extractors, 5 protectors and 2 tripods.
Stands for soldering iron, desoldering iron and heater.
Set of accessories.
PA1200 Micro Hot Tweezers
Cartridges for PA1200
PA8120 Stand for PA1200 or PA4200
No-Clean Solder paste (10cc Syringe)
No-Clean Flux (10cc Syringe)
460 Tip Cleaner
Optional Items for the AM6000:
PA4200 Hot Tweezers
Cartridges for PA4200
SC4945 Cartridge Stand for holding 12 cartridges
2210 Small Handpiece for fine SMD work
Cartridges for 2210 Handpiece

 

EXTRACTOR  

Process to desolder an IC with a AM6000 station


Click here to see the repair process

 1. Fix the extractor

2. Hot-air melts the solder

3. IC is removed automatically

4. IC is virtually clean of solder
Time needed to desolder a medium - sized IC using this process: 20 seconds
To Order Call 1-800-394-1984 and tell us you seen it in the newsletter to receive the Newsletter Special Price. 

Fixed Stereo Microscopes
From Sciencsope

 

Click here for lens and eyepiece part numbers

Click here for lighting options

FS-13-600 $775.00      

  • 1x and 3x objectives body
  • 10x eyepieces
  • Ring adapter
  • Boom stand with e-arm

FS-24-600 $775.00      

  • 2x and 4x objectives body
  • 10x eyepieces
  • Ring adapter
  • Boom stand with e-arm 

 

Top Halogen & lower fluorescent
lighting built into stand

FS-13-400 $580.00    

  • 1x and 3x objectives body

  • 10x eyepieces

  • Ring adapter

  • Dual illuminated stand

FS-24-400 $580.00  

  • 2x and 4x objectives body
  • 10x eyepieces
  • Ring adapter
  • Dual illuminated stand
   
To Order Call 1-800-394-1984 and tell us you seen it in the newsletter to receive the Newsletter Special Price. 

AD2200SMD the complete JBC soldering station for smd rework

We have put this system together for Service Centers, Engineers, or Technicians who have the need to do SMD work but are not ready to invest the big bucks for a complete rework system. With this system you will own the finest solder station in the world, along with all of the most suitable cartridges for soldering the IC's in place. You also get the Chip Quik Low Temperature IC Removal package for removal of all IC's, plus a full set of high tensile stainless steel tweezers to aid in the process. Due to the AD2200 Advanced Series  fast recovery time, you will be able to complete the process of removal and replacement with at least 100 to 200°F less than with conventional stations and possibly half the time.

AD2200SMD
JBC AD 2600 Advanced Series Soldering Station
AD2200SMD $550.00
Purchase items separately and pay $638.00. Save $88.00

 AD2200SMD Includes:

1) AD2200 Control unit
2) 2245 Handpiece
3) 2245-036 Long SMD conical tip
4) 2245-010 Cartridge for soldering PLCC's
5) 2245-009 Cartridge for soldering QFP's
6) 2245-031 Cartridge for soldering fine pitch components
7) SMD1 Chip Quik for low temperature rework
8) TWTP Full set of high tensile stainless steel tweezers

When you purchase from HEI, you receive a free setting of your required parameters with the AC2600 Console
See instructions for using this process

Check out our AD2200TP for the greatest deal in soldering    
To Order Call 1-800-394-1984 and tell us you seen it in the newsletter to receive the Newsletter Special Price.  
60 day 100% Total Satisfaction Guarantee

HEI now offers you a 60 day 100% Total Satisfaction Guarantee
Other exciting Products can be seen at www.howardelectronics.com

You will be receiving more cost saving newsletters from us in the future. If you feel like this 
newsletter will not benefit you, but would like to forward it to someone else in your organization 
go to www.howardelectronics.com/emailform.html  or if you would prefer to be completely 
removed from our customer savings list click remove@howardelectronics.com  to be taken off 
our mailing list.

Before you commit to this, remember that we are trying to help you with new tools and information to 
create a better and easier working environment. Our goal is to become Your Soldering and Desoldering Specialists.


Howard Electronic Instruments, Inc.
974 SE Pioneer Rd.
Kechi, KS  67067
(Outside of Wichita, KS)
1-800-394-1984 Toll Free (USA and Canada)
01-316-321-2800 International Phone
316-321-2803 Fax
 info@howardelectronics.com
 Our Shop Safe Guarantee