AM6500TP Complete Rework Station
Click on Image for Larger Image
AM6500TP $3550.00
from items purchased separately.
Includes all accessories normally with the AM6000, plus PA1200 micro hot tweezers, PA8120 stand, set of cartridges for hot tweezers (your choice), 10cc syringe of No Clean solder paste, 10cc syringe of No-Clean flux, Xytronic 460 tip cleaner.
View Cartridges for 2245 Handpiece
View Cartridges for 2210 Handpiece
View Cartridges for PA1200 Microtweezers
Recommended
for use with the AM6500TP:
- 2245-009,
2245-010 and/or 2245-031,
2245-038
- PA4200
Hot Tweezers
-
Micro Tweezers Cartridges
- Hot
Tweezers Cartridges
It contains 4 modules which cover the main rework tasks. Optional Micro Hot Tweezers and Standard Hot Tweezers are available with numerous cartridges. Standard Hot tweezers can also be used for wire stripping.
Hot
air for desoldering any size of SMD components.
The station uses the exclusive JBC system, based on protectors-extractors (See
image at bottom of page)
and hot-air flow, which makes desoldering clean and quick, concentrating
the heat on the IC, and protecting the rest of the circuit at the same
time.A medium-sized SMD can be desoldered in less than 20 seconds. When the IC is at desoldering temperature the extractor snaps the IC upward so fast that the leads are almost completely devoid of solder. This makes replacement of the same IC very easy if you wish.
Desoldering SMTs, through hole components and cleaning of through-hole components and pads by using
the desoldering iron DR 5570, which contains an independent vacuum pump. Pick
& Place vacuum pen
to aid in positioning components.
Soldering of all types of components, with the swift response, power and
temperature recovery of the Advanced series. You can connect the Advanced
2010, 2210, 2045 or
2245 handpieces or
PA1200 Microtweezers and
PA4200 Hot Tweezers to the AM6000.
Stands for all heating units including sleep modes for the soldering and
desoldering irons. Parameters can be changed by the use of the AC2600, or
will be done free of charge by HEI.
| SPECIFICATIONS: | |
|
|
Power 1150 W |
|
|
Maximum power soldering iron 50 W |
|
|
Maximum power desoldering iron 75 W |
|
|
Power heating unit 900W |
|
|
Temperature selection soldering iron: 100 - 350 ºC (200 - 700ºF) |
|
|
Temperature selection desoldering iron: 100 - 350 ºC (200 - 700ºF) |
|
|
Temperature selection hot air: 150 - 450 ºC (200 - 850ºF) |
|
|
Air flow regulation: 6 - 45 l/min |
|
|
Vacuum pump for holding ICs |
|
|
Antistatic control box with “skin effect” |
|
|
Weight of complete system 17,6 kg (44 Lbs) |
| AM 6000TP INCLUDES: | |
|
|
Control unit with air heater 1150W |
|
|
Handpiece 2245 with the cartridge 2245-003 |
|
|
Desoldering iron DR 5570 with the tip 5250-003 |
|
|
Pick & Place MP 2260 |
|
|
Extractor stand with: 5 extractors, 5 protectors and 2 tripods. |
|
|
Stands for soldering iron, desoldering iron and heater. |
|
|
Set of accessories. |
|
|
PA1200 Micro Hot Tweezers |
|
|
Cartridges for PA1200 |
|
|
PA8120 Stand for PA1200 or PA4200 |
|
|
No-Clean Solder paste (10cc Syringe) |
|
|
No-Clean Flux (10cc Syringe) |
|
|
Xytronic 460 Tip Cleaner |
| Optional Items for the AM6000: | |
|
|
PA4200 Hot Tweezers |
|
|
Cartridges for PA4200 |
|
|
SC4945 Cartridge Stand for holding 12 cartridges |
|
|
2210 Small Handpiece for fine SMD work |
|
|
Cartridges for 2210 Handpiece |
