AD2700
Solder Station
These products are required for a complete unit:
-Control Unit AD2700.
$330.00
- Handpiece 2210
$65.00
(20Watt)
-
Handpiece 2245
$65.00
(50Watt)
-
Cartridges for 2210 handpiece or
- Cartridges for 2245 handpiece
Free Service from HEI
With
the use of the AC2600 Console you can fix the working temperature, adjust
the sleep temperature and delay of sleep temperature, set to read Celsius
or Fahrenheit, set adjustment of temperatures up to ±99ºF (50ºC), and
set the maximum working temperature. The beauty is that you do not have to
purchase the AC2600 --- we will make the settings for you, free of charge. |
New
Innovative Features of the Advanced Series AD2700 :
I
know, you are wondering what features this line could have that other
tools do not have. I have to say they are numerous and I am sure that you
have not seen any tools like these before. I will attempt to list some of
the features. Some you may believe, and some you may not, but I can assure
you they are all true.
1.
Have you ever seen a soldering station that will melt solder
in 2 seconds after turning it on from a completely cold tip?
2.
Have you ever seen a soldering station that you can change
from one tip (cartridge) to another and be soldering in less than 10
seconds, all without the danger of burning anything, including yourself?
3.
Have you ever seen a soldering station that does not require
any calibration when switching from a small tip to a large tip, or
switching handpieces?
4.
Have you ever seen a soldering station that has an immediate
sleep mode thereby preventing the oxidation of tips when the iron is not
being used? (Sleep mode temperature is also adjustable thru the use of the
AC2600 Console. See free Service from HEI on
left of page.
5.
Have you ever seen a soldering station that advertises that
their tips will last 3 – 5 times longer than the tips you are using in
your present soldering station? (In actual use it may be as high as eight
times.)
6.
Have you ever seen a soldering, desoldering or rework station
with a 4 year warranty on materials and workmanship?
7.
Have you ever seen a soldering station that will shut off for
lunch when you place the handpiece in the proper place in the stand, and
be ready in 2 seconds by lifting the handpiece from the stand when you
return from lunch? This also applies if you are only using the solder
station intermittently as a technician would.
8.
Have you ever seen a soldering station that will tell you how
many times the station went into the sleep mode, how many times the
handpiece was taken out of the stand, the number of hours the station was
used, how may times the cartridges and/or soldering irons were exchanged?
This information can all be extracted from the solder station by the use
of the AC2600 Console.
9.
Have you ever seen a station that you can set to only allow the operator a
maximum adjustment of ±99°F (50°C)? This is accomplished with the use
of the AC2600 Console or free of charge from HEI.
|