JBC MS9024 Electric Desoldering Pump

Hot Products

Xytronic Soldering & Desoldering Station

Only $299.00

Buy of the Year
HL1910E
Heat Gun Kit

Only $169.99
Reg.$340.00

Search for Keywords

Advanced Search

HEI Line Card

Our Manufacturers

Ordering Catalogs

Table of Contents

Goals for HEI in 2010

Soldering Irons

Pb Free Solder Pots

Pb Free Solder Bars

Butane Soldering

Soldering Accessories

Solder (Wire)

Solder Paste and Flux

Soldering Tips

Desoldering Tools

Desoldering Tips

SMT Rework Stations

Heat Guns

Vacuum Pickup Tools

Micro Hot Tweezers

PC Board Holders

Dispensing Systems

Capacitor Wizard

Hot Glue Guns

Digital Multimeter

3Ghz RF Probes

Work Benches

Heat Guns

Manuals

Price Lists

Brochures

Sites of Interest

Video Clips

Company Profile

Security

JBC MS9024 Electric Desoldering Pump Module

The MS 9024 electric desoldering pump and the MS 9025 air pressure desoldering system are the evolution of the MS 9014 and MS 9015. In both the new models the aspiration inlet is now located in the rear side of the box, close to the connector for the control unit. In this way the desoldering iron tube and the cable can be paired together, leaving more order on the work bench. The filter location is maintained on the front side of the pump, so it is easy to check if it is dirty and to change it quickly.

MS9024 Electric Desoldering Pump

Click for larger image
MS9024 $475.00
MS9025 $475.00
Order Online and Save 5%

SPECIFICATIONS:

MS 9024 Electronic Desoldering Pump

Power: 12 W

Weight: 1,7 Kg.

MS 9025 Air Desoldering Pump

Power: 3 W

Compressed air pressure: 3 - 6 Bar

Recommended air pressure: 5 Bar

Weight: 1,4 Kg.

BOTH

Supply: 24 V

Antistatic control box with “skin effect”.

Typical surface resistance:

Ω/

Complies with CE standards on electrical safety, electromagnetic compatibility and antistatic protection.

Features and Benefits:

MS 9024 - Electrically driven vacuum pump. Features an overdrive at startup. This will make the vacuum ramp up quickly so the solder is being removed before the solder joint cools down.

	Manual MS 9024
	Exploded view
	Electric wiring diagram

MS 9025 - Driven by compressed air by means of a Venturi valve. This system offers the best result because the vacuum ramps up instantly. Compressed air needs to be available at the operator’s bench.

	Manual MS 9025
	Exploded view
	Electric wiring diagram

These modules allow you to use our stations DD 5700, DM 6700 and DI2860 as Desoldering stations.

DESOLDERING IRON: Easy to clean and maintain. You can choose from two different types of deposits: metal and glass. Tips can be exchanged by placing the DR5600 in the fixture of the desoldering stand and removing the tip by unscrewing with the supplied tip socket.
DR 5650 Desoldering iron The desoldering iron DR 5650 is the new version of the desoldering iron DR5570 The most important improvement introduced with this new desoldering iron is the "screw-fit" desoldering tips system included in the heating element. It enhances thermal conductivity as well as solder intake.

The range of desoldering tips is the following:

			Ref. 5600-001	Ref. 5600-002	Ref. 5600-003	Ref. 5600-004	Ref. 5600-005	Ref. 5600-006	Ref. 5600-007
	5600		001	002	003	004	005	006	007
	A outer ø	mm.	1.4	1.8	2.7	3.2	3.4	4.2	4.8
	A outer ø	inches	0.055	0.070	0.106	0.125	0.133	0.165	0.188
	B hole ø	mm.	0.6	0.8	1.0	1.3	1.6	2.0	2.5
	B hole ø	inches	0.023	0.031	0.039	0.051	0.062	0.078	0.098
	máx pin ø to desolder	mm.	0.4	0.6	0.8	1.1	1.4	1.7	2.3
	máx pin ø to desolder	inches	0.015	0.023	0.031	0.043	0.055	0.066	0.090
All Desoldering Tips $25.00ea

Order Online and Save 5%

New desoldering tips for DR 5650

3 new desoldering tips, specially designed for cleaning pads.

			Ref. 5600-011	Ref. 5600-012	Ref. 5600-013
	5600		011	012	013
	A ø	mm.	1.4	1.8	2.7
	B ø	mm.	0.6	0.8	1.0
	máx pin ø	mm.	0.4	0.6	0.8
All Desoldering Tips $25.00ea

Order Online and Save 5%

New desoldering tips for DR 5650	Enlarges tip-life by 50%!
The internal suction channel has been completely protected by a stainless steel tube.

Howard Electronic Instruments, Inc.
974 SE Pioneer Rd
El Dorado, KS 67042
1-800-394-1984 Toll Free (USA and Canada)
316-321-2800 Local
01-316-321-2800 International Phone
316-321-2803 Fax