JBC Tools JT7700 Hot Air Rework Station

The JBC JT7700 has been replaced by the upgraded JT7750
Please Click Here for the new version

JBC Tools JT7700 HIGH POWER HOT AIR STATION

Printer Friendly Page | Hot Air Station W/Soldering, Desoldering, and Hot Tweezers
New Features of the JT7700
The Temperature and Airflow can be locked.
The working time can be chosen between 10 sec. and 10 min.
Option "without time" is also available.

Video Clips

JBC JT7700 SMD Rework Station

Click on image for enlarged view
Click here for Large Facial view

Features of the JT7700

The JT7700 is for desoldering all types of SMD’s particularly QFPs and PLCCs of any size.

The station uses a system based on protector-extractors and hot-air flow, which makes desoldering clean and quick, while protecting the other components by concentrating the heat onto the IC.

A medium-sized SMD, for example, can be desoldered in 20 seconds.

The station is completely self-contained and includes a vacuum pump for extracting the IC's during reflow.

JT7700 With All Accessories
JT7700A Without Accessories
Order Online and Save 5%

For a smaller version designed for smaller IC's and PC Boards, Click here.

SPECIFICATION:

Power: 900 W

Temperature selection: 150-455 °C (200-850º F)

Air flow settings: 6-45 l/min

Antistatic control box “skin effect”

Weight of complete system: 8.7 kg (19.18 lbs)

Self-contained air pump for hot-air with electronic control of temperature and air-flow.

Vacuum pump for holding and extracting ICs

JT7700 INCLUDES:

Control unit with 900 W heater

Extractor stand with 5 extractors, 5 protectors and 2 tripods

Control pedal, heater stand and set of accessories

Unit is supplied with or without accessories.

JT7700 With All Accessories
JT7700A Without Accessories
Order Online and Save 5%

Hi!
I've used JBC products for PC mainboard repair, a lot cheaper than others. Used it for QFP's and PLCC's. It costs US$ 2,390 with all accessories for the JT7700 (http://www.howardelectronics.com/jbc/jt7700.html) . I've evaluated other brands, they don't come close with ease of use. A medium sized QFP can be removed in 20 secs! Quick removal translates to less PCB/chip damage. Removing the SMT part is the easy part, profitability is another.
Regards.

Process to desolder an IC with a JT 7700 station
Click here to see the repair process	1. Fix the extractor 2. Hot-air melts the solder 3. IC is removed automatically 4. IC is virtually clean of solder
Time needed to desolder a medium - sized IC using this process: 20 seconds JBC SHIELDS, Nozzles, Tripods, Manual Nozzles Watch Short Video Clips on JBC Tools


MANUAL	EXPLODED VIEW		ELECTRIC WIRING DIAGRAM		RANGE OF PROTECTORS AND EXTRACTORS
SIZE: 1.260.619 Bytes	120 V SIZE: 482.353 Bytes	230 V SIZE: 565.285 Bytes	120 V SIZE: 59.760 Bytes	230 V SIZE: 126.769 Bytes	SIZE: 55.468 Bytes