| |
COMPACT STATIONS |
| |
 |
NEW
CD-1BB with T245-A
comes
with a T245-A handpiece and C245-003, C245-007
cartridges. |
| |
|
| |
|
NEW
CD-1SB with T210-A
comes
with a T210-A handpiece and C210-001, C210-008
cartridges. |
| |
|
| |
 |
NEW
CP-1A
Micro
tweezers station for soldering and desoldering
SMD components. Comes with a PA-A micro hot
tweezers handpiece and C120-002, cartridges. |
| |
|
| |
 |
NEW
CF-1A
Solder
feed station designed for repetitive soldering
or when you need a free hand. Equipped with
solder feed iron of 1mm diameter. |
| |
|
| |
ENTRY STATIONS |
| |
 |
BT Series Soldering
Stations by JBC
comes with your
choice of T245-A Handpiece and C245-003,
C245-007 Cartridges or T210 Micro Handpiece and
C210-001, C210-008 Cartridges |
| |
|
| |
 |
BD-1BA Digital Soldering
Station
with T245-A
Handpiece and C245-003, C245-007 Cartridges.
Digital control unit BD-1BA is the basic control
unit that allows operation alternatively with a
20w (BD-1SA) or 50W(BD-1BA) soldering
iron, covering all electronics soldering
requirements. |
| |
|
| |
|
BD-1SA Digital Soldering
Station
with T210 Micro
Handpiece and C210-001, C210-008 Cartridges.
Digital control unit BD-1SA is the basic control
unit that allows operation alternatively with a
20w (BD-1SA) or 50W(BD-1BA) soldering
iron, covering all electronics soldering
requirements. |
|
|
|
JBC
BD-1BASMD The
Ultimate in SMD Rework Soldering.
Rework SMD's with only a soldering iron and Chip
Quik. All of the necessary tips and accessories
for reworking all surface mount IC's.
More
Info |
| |
|
| |
SINGLE STATIONS |
| |
|
PA Micro Tweezer Station
- Soldering
and desoldering SMD components with
Micro-Tweezer. Digital stations with 2 lines
display and menu that allows the parameters
modification of the initial configuration of the
station. Allows the configuration of the
following parameters; - Fixing the working
temperature - Modification of "sleep"
temperature - Selection of Hibernation mode -
Protection PIN Counters, working hours, cycles
etc.. - Calibration of temperatures. |
| |
|
| |
 |
DS / DV Micro Desoldering
Station - Digital stations with 2
lines display and menu that allows the
parameters modification of the initial
configuration of the station. Allows the
configuration of the following parameters; -
Fixing the working temperature - Modification of
"sleep" temperature - Selection of Hibernation
mode - Protection PIN - Counters, working hours,
cycles etc.. - Calibration of temperatures |
| |
|
| |
 |
AP Solder Feed Station
- Digital stations with 2 lines display
and menu that allows the parameters modification
of the initial configuration of the station.
Allows the configuration of the following
parameters; - Fixing the working temperature -
Modification of "sleep" temperature
Selection of Hibernation mode - Protection PIN -
Counters, working hours, cycles etc..
Calibration of temperatures |
| |
|
| |
PREMIUM LINE |
| |
 |
PH-1A Infrared
Preheater
The PH heats the
PCBs from below allowing handsoldering to be
completed much faster and at lower soldering tip
temperatures. As a result solder tip life is
increased and there is a reduced risk of thermal
stress on components and PCBs. |
| |
|
| |
 |
DIT-1A Soldering Station
For high and medium precision
solder-joints with the T245 handpiece, C245-003
cartridge
DIR-1A
Soldering Station
For high precision solder-joints with the T210
handpiece, C210-001 cartridge
|
| |
|
| |
 |
HD Heavy Duty Station
- The HD-1A is the best solution for high
thermal demand and prolonged heavy duty
soldering. It is specially designed to solder
intensively on multi-layer boards and on parts
requiring high amount of heat. The temperature
on the tip is strictly controlled by a micro
processor through the sensor-heating element
integrated to the tip itself. The HD also offers
high reliability especially in intensive
applications like for example in solar panels.. |
| |
|
| |
 |
DIS-1A Desoldering Station
for desoldering insertion components and
clean circuits with SMD. |
| |
|
| |
 |
DDST-1A Soldering and
Desoldering Station The DDST-1A
station offers the complete solution for the
fast and safe circuit repair with insertion
components by solder intake. It’s also necessary
for cleaning the pads in SMD circuits. Features
all the benefits from the JBC technology, such
as fast temperature recovery, the sleep mode,
small footprint, lightweight tools and
manageability of the soldering and desoldering
irons. |
| |
|
| |
 |
JT-1A High Power Hot-Air
Station - The JT-1A is a high
power hot air station used for desoldering all
types of SMDs. Its powerful heater enables quick
and safe desoldering of even the biggest QFPs
and PLCCs. In addition, it desolders small and
medium sized BGA’s in a very reduced time span.
Digital read-out temperature allows more
precision and tool control. |
| |
|
| |
 |
TE Precision Hot-Air
Station - The TE-1A is a
precision hot air station ideal, for desoldering
and soldering small and medium sized SMD’s by
hot-air. It takes about 30 seconds to desolder a
medium sized component, quick enough to prevent
the substrate and component from heating up to a
dangerous temperature. |
| |
|
| |
 |
AM Rework Station
for rework and repair of through-hole and
SMT boards. It contains four modules that cover
the main rework tasks: Hot air to desolder any
size of SMD component. The station uses the
exclusive JBC system, based on
protectors-extractors and hot-air flow which
makes desoldering safe, clean and quick,
concentrating the heat on the IC, and protecting
the rest of the circuit at the same time.
Desoldering SMTs and cleaning through-hole
components, and pads by using the desoldering
iron DR-A. |
| |
|
| |
 |
AL Automatic Solder Feed
Station This is the perfect
solution for intensive soldering processes where
one or two hands free are needed. It automates
the soldering by solder feed system using the
advantages of the JBC soldering station. The
system is supplied containing the control unit
AL-1A that incorporates the electronic control,
the motorized solder wire feed, the conduction
tube and the solder feed handle. |
|
| |
 |
Finally a station that will
rework 01005, 0201, 0402 chips
This has been a long time in the
making and it is here now.
NA Nano
Station is a complete station,
for micro rework designed for micro soldering
and micro desoldering the tiniest components,
like chips 0201, 0402, etc. Tools for this
station; Nano soldering iron NT205-A and nano
tweezer NP105-A are the lightest, tiniest and
ergonomic of the market, which allows you to
work at highest precision. |
| |
|
| |
MODULAR LINE |
| |
 |
DI 1 Tool
Control Unit - Featuring digital
read-out, for precise temperature and tool
control. Control unit is designed for production
and rework applications in electronics. The
stations are provided with extra built-in
features to personalize hibernation, sleep
settings and temperature limits. All parameters
can be blocked with a PIN. All JBC soldering
hand pieces and hot tweezers can be used, always
using the corresponding stand, also the DR-A
desoldering iron can be connected by adding the
electric suction system MS-A or pneumatic system
MV-A. |
| |
|
| |
 |
DD 2 Tool
Control Unit - Featuring digital
read-out that allow precise temperature and tool
control. The single dual unit DD-1A allows you
to connect and work with 2 tools simultaneously.
This control unit was designed for production
and rework applications in electronics with a
height thermal requirement. This station is
provided with extra-built features to
personalize hibernation, sleep, and temperature
limits. You can connect to the units DD to all
the tools of our JBC range, always using their
corresponding stand, including the desoldering
iron DR-A by adding the desoldering pump (MS-A
or MV-A). |
| |
|
| |
|
DM 4 Tool
Control Unit - Control units
featuring digital read-out that allow precise
temperature and tool control. The control unit
DM-1A allows you to connect and work with 4
tools simultaneously. This control units was
designed for production and rework applications
in electronics with a high thermal requirement.
This station is provided with extra-built
features to personalize hibernation, sleep, and
temperature limits. You can connect to the DM to
all the tools of our JBC range, always using
their corresponding stand, including the
desoldering iron DR-A by adding the desoldering
pump (MS-A or MV-A |
| |
|
| |
 |
JBC Tools FS500 Fume
Extractor Switch
This accessory
performs as a switch fumes suction system. Use
with any fume extractor. |
| |
|
| |
 |
MS-A Electric Desoldering Pump -
Electrically driven vacuum pump.
Features an overdrive at startup. This will make
the vacuum ramp up quickly so the solder is
being removed before the solder joint cools
down. This suction system is feed by the control
unit.
MV-A Pneumatic Suction System
- Uses compressed air and a Venturi valve. This
system offers the best result because the vacuum
ramps up instantly. Compressed air needs to be
available at the operator’s bench. |
| |
|
| |
 |
Stands for JBC Tools
- Range of stands covering the variety of
advanced series tools. The stands are situated
between the tool and the control unit,
which makes the Advanced systems advantages
possible. For example, one
advantage is the temperature reduction
in the “sleep” mode when the tool is
put in its stand, thus obtaining an extended
tip-life and avoiding oxidation
of the tip’s solder plating |
| |
|
| |
 |
T210,
T245 and T245C Handpieces for Soldering Stations
-
Sleek, light, small, short tip to grip distance,
comfortable, these words all describe the worlds
best soldering handpieces. Try for yourself and
you will be delighted that someone is looking
out for your comforts in soldering. |
| |
|
| |
 |
PA
Micro Hot Hand Tweezers
- Ergonomically correct hand tweezers that
really are comfortable to use and can be used on
the smallest of chips to the larger SOIC's. Also
uses the Advanced Series Technology for super
fast recovery time. |
| |
|
| |
 |
PA4200 Hot
Tweezers -
Specially design to desolder small to medium
sized SMD's as well a strip wire and cables. |
| |
|
| |
 |
DR Desoldering Iron
- Easy to clean and maintain. You can choose
from two different types of deposits: metal and
glass. Tips can be exchanged by simply loosening
a screw. The most important improvement
introduced with this new desoldering iron is the
"screw-fit" desoldering tips system included in
the heating element : it enhances thermal
conductivity as well as solder intake. |
| |
|
| |
 |
DS Micro Desoldering Iron
- Designed for soldering the smallest
components. Easy to clean and maintain. Tips can
be changed by easily pulling and pushing against
its stand. |
| |
|
| |
 |
AP1300
Solder Feed Iron
-
Provides a “third
hand” in soldering by feeding solder wire form
0.8 to 1.2 mm. Especially advantageous in high
volume soldering and wherever an extra hand is
needed. |
|
| |
| |
 |
SC4945 Cartridge Stand -
Used for the extraction and placement of 12
cartridges. Perfect view of the shape allows the
user to select and exchange from one cartridge
to another. |
|
| |
 |
SC 3 Cartridge
Stand for JBC C245 and DR series cartridges
Holds up
to 3 cartridges C245 and 2 tips for DR-A. Can be
used with any JBC stand |
|
| |
 |
Stands for
all handpieces
- Each handpiece
uses it's own stand for getting the handpiece
closer to your work and also for enabling the
sleep mode for each handpiece. Six stands
available for the different tools. |
|
| |
 |
AC2600
Console
- Designed to modify
the original regulation program parameters of
any of the following Advanced Stations: AD2200,
DI3000, AD4200, AD4300, DS5300, AR5500, AR5800,
AM6000, AM6500 and all packages. A must if you
own more than one JBC tool. |
|
| |
 |
SE8990 Tip
Cleaner
- The large surface of the sponge facilitates
its use. Equipped with a water bottle which
constantly keeps the sponge damp, for a number
of days in normal conditions. Additionally
fitted with stands for two 15ml bottles of flux.
(Not Supplied) |
|
| |
 |
TI2800
Thermometer -
Used for measuring
tip temperatures of soldering stations. An
extremely accurate analog readout from 40º to
920º F. |
|
| |
 |
TT9900 and TT9400 Tip Cleaner and Sponges
- Leaded tip
cleaner and Lead Free
Tip Cleaner and sponges for all JBC soldering
irons and stands. |
| |
|
| |
 |
JBC
Shields, Nozzles, Tripods, Manual Nozzles
- JBC Tools has an wide
assortment of Shields, Nozzles, Tripods and
Manual Nozzles for JBC's Hot Air Rework
Stations. These attachments are designed for
removing SMD's with either a AM6800, JT7700, or
the TE5400. All attachments must be used with a
vacuum source. |
| |
|
| |
OLD STYLE TOOLS |
| |
 |
JBC's New
Family of Tools
JBC has taken the
ever popular AD2950 and transformed it into four
separate tools, each with it's own handpiece and
corresponding stand. This family of tools should
be the most popular tools ever designed by JBC
as it allows for the lowest price for the Very
Popular Micro Tweezers
and Micro Desoldering Tool.
The family is AD2910,
AD2940,
MT2920, and
MD2960.
|
| |
|
| |
 |
AD2950
Digital Soldering Station -
Digital
control unit AD 2950 is the basic control unit
that allows operation alternatively with a 20w
or 50W soldering iron, covering all electronics
soldering requirements. Purchase as individual
units or as Packages...AD2950TP
or
AD2950SMD
See our
Package
Deals to Save $$$ |
|
| |
 |
DI2860
Digital Soldering Station
- The
revolutionary digital soldering station with all
of the Advanced Series Features, that allows one
operator to use one soldering iron or one hot
tweezers.
See our
Package Deals to Save
$$$ |
|
| |
|
DI3000
Digital Dual Soldering Station
- The
revolutionary digital dual soldering station
with all of the Advanced Series Features, that
allows one operator to use two soldering irons,
two hot tweezers, or the combination of any JBC
soldering irons and any JBC hot tweezers.
Digital Stations are here now.
See our
Package Deals to Save
$$$ |
|
| |
 |
JBC
DD5700KIT Soldering and Desoldering Station
This is
the new soldering and desoldering station from
JBC. The desoldering pump features an overdrive
at start-up. This make the vacuum ramp up
quickly so the solder is removed before the
solder joint cools down. It uses all of the very
latest features of the Advanced Series
Technology. |
|
| |
 |
DM6700 Quad
Soldering Station
- You can connect all the
tools of our Advanced range to the DM6700,
always using its corresponding stand, including
the
desoldering iron DR 5600 by adding the
desoldering pump
MS9004. See our
Package Deals to Save
$$$ |
|
| |
|
DD5700 Dual
Soldering Station
- You can connect all the tools of our Advanced
range to the DD5700, always using its
corresponding stand, including the
desoldering iron DR 5600 by adding the
desoldering pump
MS9004. See our
Package Deals to Save
$$$ |
|
| |
 |
JBC HD4700
Heavy Duty Soldering Station
The HD 4700 is
the ideal solution for prolonged heavy duty
soldering. It is specially designed to solder
intensively on multiple layer boards and on
parts requiring high amount of heat. The
temperature on the tip is strictly controlled by
a micro processor through the sensor-heating
element integrated to the tip itself.
It
includes a sleep system, the hibernation mode
and all other basic advantages featured in the
rest of our Advanced stations. |
|
| |
 |
JBC AM7000SMD Complete Rework
Station -
Includes
JT7700 Hot Air Station,
DM6700
Quad Soldering/Desoldering Station,
MS9004 Desoldering Pump,
DR5650 Desoldering
Handpiece,
2245
Handpiece,
2210
Handpiece,
PA1200 Micro Hot Tweezers,
Stands,
Cartridges and accessories. See the
complete
repair process with the JBC AM7000SMD. |
|
| |
 |
AM6800
Complete SMD Rework Station
-
This is our best selling
rework station and for good reason. It simply
does the job and does it fast, efficiently, and
effectively. Choose from three different package
deals sold exclusively by us.
Our most popular is the newly
designed
AM6800SMD.
See our
Package Deals to Save
$$$ |
|
| |
 |
AL2500 Automatic Solder
Feeder -
JBC AL2500 solder feed station is the perfect
complement to automate the solder through a feed
system using the unique advantages of the
Advanced Soldering station. The system is
supplied containing the control unit AL 2500
that incorporates the electronic control, the
motorized solder wire feed, the conduction tube
and the solder feed handle. 4 Year Warranty.
|
|
| |
 |
JT7750 Hot
Air Rework Station
- Uses the Advanced Series
Technology for fast and efficient removal and
replacement of Surface Mount Components. By
using the extractors, protectors, and tripods,
SMD's can be removed in less time than
conventional units, while leaving the IC almost
devoid of solder. |
|
| |
 |
JBC TE5400
Precision Hot Air Rework Station
Smaller than the JT7000, but with the protector
and extractor system. Great for working on Cell
Phones, Camcorders, Pagers, etc. or anywhere
that small spot type hot air is needed. Totally
Self Contained. Newer upgrade from TE5000 |
|
| |
|
JBC
Shields, Nozzles, Tripods, Manual Nozzles
- JBC Tools has an wide
assortment of Shields, Nozzles, Tripods and
Manual Nozzles for JBC's Hot Air Rework
Stations. These attachments are designed for
removing SMD's with either a AM6800, JT7700, or
the TE5400. All attachments must be used with a
vacuum source. |
|
| |
|
2210,
2245 and 2245C Handpieces for Soldering Stations
- Sleek, light,
small, short tip to grip distance, comfortable,
these words all describe the worlds best
soldering handpieces. Try for yourself and you
will be delighted that someone is looking out
for your comforts in soldering. |
|
| |
|
AP1300
Solder Feed Iron
-
Provides a “third
hand” in soldering by feeding solder wire form
0.8 to 1.2 mm. Especially advantageous in high
volume soldering and wherever an extra hand is
needed. |
|
| |
|
PA1200 Micro Hot Hand Tweezers
- Ergonomically correct hand tweezers that
really are comfortable to use and can be used on
the smallest of chips to the larger SOIC's. Also
uses the Advanced Series Technology for super
fast recovery time. |
|
| |
|
PA4200 Hot
Tweezers -
Specially design to desolder small to medium
sized SMD's as well a strip wire and cables. |
|
| |
|
SC4945 Cartridge Stand -
Used for the extraction and placement of 12
cartridges. Perfect view of the shape allows the
user to select and exchange from one cartridge
to another. |
|
| |
|
SC 3 Cartridge
Stand for JBC 2245 and DR5600 series cartridges
It can
hold up to 3 cartridges 2045/2245 and 2 DR 5600
desoldering tips. |
|
| |
|
Stands for
all handpieces
- Each handpiece
uses it's own stand for getting the handpiece
closer to your work and also for enabling the
sleep mode for each handpiece. Six stands
available for the different tools. |
|
| |
|
AC2600
Console
- Designed to modify
the original regulation program parameters of
any of the following Advanced Stations: AD2200,
DI3000, AD4200, AD4300, DS5300, AR5500, AR5800,
AM6000, AM6500 and all packages. A must if you
own more than one JBC tool. |
|
| |
|
SE8990 Tip
Cleaner
- The large surface of the sponge facilitates
its use. Equipped with a water bottle which
constantly keeps the sponge damp, for a number
of days in normal conditions. Additionally
fitted with stands for two 15ml bottles of flux.
(Not Supplied) |
|
| |
|
TI2800
Thermometer -
Used for measuring
tip temperatures of soldering stations. An
extremely accurate analog readout from 40º to
920º F. |
|
| |
|
TT9900 and TT9400 Tip Cleaner and Sponges
- Leaded tip
cleaner and Lead Free
Tip Cleaner and sponges for all JBC soldering
irons and stands. |
