JBC Tools Display Messages

• HIBERNATION:
  Tool completely cold. Minimum consumption mode.

• SLEEP MODE:
  Short temperature tool (with in 200 to 280ºC depending on tool).

ERROR MESSEGES

• E.OPEN CIRCUIT:
  Heating element with open circuit.
  Possible causes: The cartridge has not been inserted correctly in the tool. Damaged cartridge.

• E.OVERLOAD:
  The maximum available power has been exceeded for too long. You must wait and the station will automatically reset.

• E.SHORTCIRCUIT:
  Short circuit in the system.
  Possible causes: Short circuit in the cartridge, in the handpiece, etc.

• E.WRONG TOOL:
  Possible causes: use of a tool which is not compatible with the station.

Once you correct the above mentioned causes, the station will start working automatically.