• HIBERNATION: Tool completely cold. Minimum consumption mode.

• SLEEP MODE:Short temperature tool (with in 200 to 280ºC depending on tool).

ERROR MESSAGES

• E.OPEN CIRCUIT: Heating element with open circuit.
  Possible causes: The cartridge has not been inserted correctly in the tool. Damaged cartridge.

• E.OVERLOAD: The maximum available power has been exceeded for too long. You must wait and the station will automatically reset.

• E.SHORTCIRCUIT: Short circuit in the system.Possible causes: Short circuit in the cartridge, in the handpiece, etc.

• E.WRONG TOOL: Possible causes: use of a tool which is not compatible with the station.

Once you correct the above mentioned causes, the station will start working automatically.