JBC AM7000SMD Ultimate SMD Rework Station for less at Howard Electronic Instruments, Inc.

Soldering and desoldering tools sell for less at Howard Electronic Instruments

Howard Electronic Instruments Soldering and Desoldering

Hot Products

Xytronic Soldering & Desoldering Station

Only $299.00

Buy of the Year
HG3002LCDKIT
Heat Gun Kit

Sale $149.00

Search for Keywords

Advanced Search

HEI Line Card

Ordering Catalogs

Goals for HEI in 2011

Soldering Irons

Pb Free Solder Pots

Pb Free Solder Bars

Butane Soldering

Soldering Accessories

Solder (Wire)

Solder Paste and Flux

Soldering Tips

Desoldering Tools

Desoldering Tips

SMT Rework Stations

Heat Guns

Vacuum Pickup Tools

Micro Hot Tweezers

PC Board Holders

Dispensing Systems

Capacitor Wizard

Hot Glue Guns

Digital Multimeter

3Ghz RF Probes

Heat Guns

Manuals

Price Lists

Brochures

Sites of Interest

Video Clips

Company Profile

Security

The Ultimate JBC Tools SMD, SMT Rework Station
The most advanced SMD rework station in the world
Fast, Efficient, Productive, Effective, User friendly, Small Footprint

JBC AM7000SMD
The most advanced SMD rework
station in the world

Click here for Large Image

AM7000SMD $5495.00
Order Online and Save 5%

Purchase the
AM7000SMD
as a Complete Package
SMD Rework Station
and have the
Best of the Best

The JBC AM7000SMD covers the trials and tribulations of removing and replacing SMD or SMT components. It can be operated by anyone and does not require any training except for reading and understanding the manual. This tool is for those who want the best the electronics market has to offer with a minimum required amount of workspace.

Most effective when purchased with the
HEI-VM-TS LCD Zoom Inspection System
AM7000SMDLCD $7495.00
or
HEI-MP4-FR Stereo Zoom Microscope
AM7000SMDTP $6495.00

SPECIFICATIONS:
	Power JT-1A 900 W
	Maximum power T210soldering iron 20 W
	Maximum power T245 soldering iron 50 W
	Maximum power DR-A desoldering iron 75 W
	Maximum Power DM-1B (4 X 75 Watts)
	Temperature selection soldering iron: (190 - 840ºF)
	Temperature selection desoldering iron: (190 -850ºF)
	Temperature selection hot air: (Room - 850ºF)
	Air flow regulation: 6 - 45 l/min
	Antistatic control box with “skin effect”
	Weight of complete system 27.27kg (60 Lbs)

Watch Short Video Clips on JBC Tools

click here to see the integrated circuit repair process Click here to see the repair process

Top 10 Reasons to Buy JBC

AM7000SMD INCLUDES:
	JT-1A with extractor stand with: 5 extractors, 5 protectors and 2 tripods and all accessories..
	DM-1B Quad Control Unit with outputs on the rear of unit.
	MS-A High Power Electric Desoldering Pump
	Handpiece T 245 with the cartridge C245-003
	T210 (20 Watt handpiece) for precise soldering with soldering cartridges, (C210-009)and (C210-001)
	PA-A Micro-tweezers for chip and small SOIC replacement and two hot tweezer cartridges (C120-002)
	Desoldering iron DR-A with the tip 5600-003
	Stands for soldering irons, desoldering iron, microtweezers and heater, including CL9885 Tip Cleaning System instead of sponges shown in image.
	Set of accessories. Click here for list
And three SMD Cartridges C245-009, C245-010, C245-031
	No Clean Gel Flux NC559V2

	Optional accessories:
	SC3 Cartridge stand for holding 3 cartridges
	SC4945 Cartridge Stand for holding 12 cartridges

JBC JT-A Wand and Accessories

Click for large image	JT-A 900 Watt Wand $300.00

Click for large image	0007565 900 Watt heating element for JT-A Wand $205.00

FOLLOW THIS PROCESS INVERTED TO RE-CONNECT THE HEATER.
This step has to be performed when the heater is cold.
1. Un-tighten screw.
2. Separate the heating element from the heater’s cable.
3. Connect the new heating element, pushing it’s extreme.
4. Insert screw to avoid air-loss which could reduce the heating element’s lifetime.

tripod and protector for extracting qfp, plcc, and ic components

IC extractor for smd rework

Process to desolder an IC with an AM7000SMD

smt rework IC extractor
Click here to see the repair process

1. Fix the extractor

2. Hot-air melts the solder

3. IC is removed automatically

4. IC is virtually clean of solder

Time needed to desolder a medium - sized IC
using this process: 20 seconds
JBC Shields, Nozzles, Tripods, Manual Nozzles

Howard Electronic Instruments, Inc. Address and Information

Howard Electronic Instruments, Inc.
974 SE Pioneer Rd
El Dorado, KS 67042
1-800-394-1984 Toll Free (USA and Canada)
316-321-2800 Local
01-316-321-2800 International Phone
316-223-3111 NEW Fax Number