JBC AM6850SMD total smt rework station

JBC AM6850SMD SMD Rework Station
The most advanced SMD rework station in the world
Fast, Efficient, Productive, Effective, User friendly
Read (Analyzing the AM6850 | See the AM6850TP w/hot tweezers | AM6850 Only

JBC AM6850SMD The most advanced SMD rework station in the world

Purchase the
AM6850SMD
as a Total Package
SMD Rework Station
and have the
Best of the Best

Tech Note: You will be totally amazed, like all of our customers, at how effortless changing Surface Mount Devices can be. With this package, I would recommend a quality Stereo Zoom Microscope. It will not only give you a detailed view while replacing the SMD, but will allow you to totally inspect and admire your masterpiece.

Lowest price when purchased as a package.
AM6850SMD$4990.00

AM6850SMDTP $5700.00
with HEI-MP4-FR Stereo Zoom Microscope
(Perfect for this application)
Watch Short Video Clips on JBC Tools

SMD Rework Station for rework and repair of through-hole and SMT boards.
It contains 6 modules which cover the all of the main rework tasks.

Hot air for desoldering any size of SMD components. The station uses the exclusive JBC system, based on protectors-extractors (See image at bottom of page) and hot-air flow, which makes desoldering clean and quick, concentrating the heat on the IC, and protecting the rest of the circuit at the same time.
A medium-sized SMD can be desoldered in less than 20 seconds. When the IC is at desoldering temperature the extractor snaps the IC upward so fast that the leads are almost completely devoid of solder. This makes replacement of the same IC very easy if you wish.

Desoldering SMTs, through hole components and cleaning of through-hole components and pads by using the desoldering iron DR 5600, which contains an independent vacuum pump.

Pick & Place vacuum pen to aid in positioning components.

Soldering of all types of components, with the swift response, power and temperature recovery of the Advanced series. You can connect the Advanced 2210, or 2245 handpieces or PA1200 Microtweezers and PA4200 Hot Tweezers to the AM6850.

Hot Tweezers The PA1200 Microtweezers, stand, and 1200-002 tweezers cartridges come with the unit, which is controlled by a Dual Digital Soldering Station (DI3000) along with the 2210 handpiece, stand, and 2210-009 cartridge.

The station is easily controllable thanks to the precise information display. All of the functions of the console AC 2600 have an integrated password that allows you to adapt maximum functions for each user.
Apart from the standard setup as shown, any of the Advanced tools can be connected to both the soldering and desoldering modules; handpieces, desoldering iron, desoldering tweezers or solder feed iron.
In doing so, tools can be combined to set up the station to suit any specific task. The only limitation is that only one desoldering iron can be connected to the station.

SPECIFICATIONS:
	Power 1100 W
	Maximum power soldering iron 50 W
	Maximum power desoldering iron 75 W
	Power heating unit 1000W
	Temperature selection soldering iron: 90 - 450ºC (190 - 840ºF)
	Temperature selection desoldering iron: 90 - 450ºC (190 - 840ºF)
	Temperature selection hot air: 150 - 455 ºC (200 - 850ºF)
	Air flow regulation: 6 - 45 l/min
	Vacuum pump for holding ICs
	Antistatic control box with “skin effect”
	Weight of complete system 27.27kg (60 Lbs)

Watch Short Video Clips on JBC Tools

click here to see the integrated circuit repair process Click here to see the repair process

AM 6800SMD INCLUDES:
	Control unit with air heater 900W
	Handpiece 2245 with the cartridge 2245-003
	Desoldering iron DR 5600 with the tip 5600-003
	Pick & Place Wand MP 2260
	Extractor stand with: 5 extractors, 5 protectors and 2 tripods.
	Foot Switch for hot blower
	Stands for soldering iron, desoldering iron, and heater.
	Set of accessories. Click here for list
DI3000 Dual Soldering Station
	PA1200 Micro Hot Tweezers
	And two hot tweezer cartridges (1200-002)
	2210 (20 Watt handpiece) for precise soldering
	Soldering cartridge for handpiece (2210-009)and (2210-001)
	And three SMD Cartridges 2245-009, 2245-010, 2245-031
	Stands for Soldering Iron (AD8210) and Hot Tweezers (PA8110)
	Optional accessories:
	SC4945 Cartridge Stand for holding 12 cartridges
	No Clean Gel Flux NC559V2

tripod and protector for extracting qfp, plcc, and ic components

Process to desolder an IC with an AM6850, JT7700or TE5400
Click here to see the repair process	1. Fix the extractor 2. Hot-air melts the solder 3. IC is removed automatically 4. IC is virtually clean of solder
Time needed to desolder a medium - sized IC using this process: 20 seconds JBC Shields, Nozzles, Tripods, Manual Nozzles

MANUAL

EXPLODED VIEW

ELECTRICAL WIRING DIAGRAM

RANGE OF PROTECTORS AND EXTRACTORS

RANGE OF CARTRIDGES

120V
Size: 3.073.206 Bytes

120V
Exploded view

230V
Exploded view

Electric
wiring diagram

SIZE: 67.327 Bytes

Handpieces
size: 115.742 Bytes

PA 4200
105.532 Bytes

PA 1200
42.552 Bytes

DESOLDERING TIPS

Related Items

	JBC AD2950 Soldering Station
	JBC JT7750 Hot Air Rework Station
	JBC DD5700 Digital Dual Soldering Station
	JBC DM6700 Digital Quad Control Unit - Capable of controlling four handpieces

Howard Electronic Instruments, Inc.
974 SE Pioneer Rd
El Dorado, KS 67042
1-800-394-1984 Toll Free (USA and Canada)
316-321-2800 Local
01-316-321-2800 International Phone
316-321-2803 Fax