|
JBC AM6800TP
The most advanced SMD rework
station in the world |
|
|
AM6800TP Complete Rework Station

Click on Image for Larger Image
AM6800TP $4280.00
Save
$129.50
from items purchased separately.
Includes AM6800 with all
accessories and items shown below.
1 - PA1200 micro hot tweezers
2 - PA8110 stand
3 - Set of cartridges for hot tweezers (2 x
1200-002)
4 - 10cc syringe of No Clean solder paste
5 - 10cc syringe of No-Clean flux
6 - 460 tip cleaner.
View Cartridges (Tips) for
2245 Handpiece
View Cartridges (Tips)
for 2210 Handpiece
View Cartridges (Tips)
for PA1200 Microtweezers
Recommended for use with the AM6800TP:
-
2245-009,
2245-010 and/or
2245-031,
2245-038
- PA4200
Hot Tweezers
-
Micro Tweezers Cartridges
- Hot Tweezers
Cartridges
Go to the JBC
AM6800 without the Hot Micro Tweezers |
AM6800TP is a SMD Rework Station for rework and
repair of through-hole and SMT boards. It contains 4 modules which cover
the main rework tasks.
Hot air for desoldering any size of SMD
components. The station uses the exclusive JBC system, based on
protectors-extractors (See image at bottom of page)
and hot-air flow, which makes desoldering
clean and quick, concentrating the heat on the IC, and protecting the
rest of the circuit at the same time.
A medium-sized SMD can be desoldered in less than 20 seconds. When the IC
is at desoldering temperature the extractor snaps the IC upward so fast
that the leads are almost completely devoid of solder. This makes
replacement of the same IC very easy if you wish.
Desoldering SMTs, through hole
components and cleaning of through-hole components and pads by using the
desoldering iron DR 5600,
which contains an independent vacuum pump.
Pick & Place
vacuum pen
to aid in positioning components.
Soldering of all types
of components, with the swift response, power and temperature recovery
of the Advanced series. You
can connect the Advanced 2010,
2210, 2045 or
2245 handpieces or
PA1200 Microtweezers and
PA4200 Hot Tweezers to
the AM6800.
The station is easily controllable thanks to the precise information
display. All of the functions of the console AC 2600 have an integrated
password that allows you to adapt maximum functions for each user.
Apart from the standard setup as shown, any of the Advanced tools can be
connected to both the soldering and desoldering modules; handpieces,
desoldering iron, desoldering tweezers or solder feed iron.
In doing so, tools can be combined to set up the station to suit any
specific task. The only limitation is that only one desoldering iron can
be connected to the station.
Read Customer Testimonials |
|
 |
 |
|
Process to desolder an IC with a AM6800 station
|
|

Click here to see the repair process |
1. Fix the extractor
2. Hot-air melts the solder
3. IC is removed automatically
4. IC is virtually clean of solder |
|
Time needed to desolder a medium - sized IC
using this process: 20 seconds |
|
|
Copyright © 1996 - 2007 Howard Electronic Instruments, Inc. All rights reserved.
Revised: 06/08/2007
|
|
|
JBC Tools
Video Clips
JBC Manuals
Specification Sheets
JBC
Price List
Ordering Catalog
JBC Catalog
Drag
soldering
JBC Warranty
Package Deals
AD2950
AD2950TP
AD2950SMD
AD2950 Kits
JBC Family
AD2910
AD2940
MT2920
MD2960
DI2860
DI3000
AL2500
AM6800
Shields
AM6800TP
AM6800SMD
AM7000SMD
Shields
DD5700KIT
DR5650
Desoldering Tips
DM6700
DD5700
HD4700
JT7750
Shields
TE5400
Shields
Stands
Handpieces
2210
Cartridges
2245
Cartridges
2245C
Cartridges
PA1200
Cartridges
PA4200
Cartridges
AP1300
Cartridges
DS5300
SC4945
SC 3
AC2600
SE8990
TI2650
TI2800
TT9900
TT9400
MS9000
Home Page |