JBC AM-1TP Complete rework station for smd, smt and thru-hole pc boards

Soldering and desoldering tools sell for less at Howard Electronic Instruments

Howard Electronic Instruments Soldering and Desoldering

Hot Products

Xytronic Soldering & Desoldering Station

Only $299.00

Buy of the Year
HG3002LCDKIT
Heat Gun Kit

Sale $149.00

Search for Keywords

Advanced Search

HEI Line Card

Ordering Catalogs

Goals for HEI in 2011

Soldering Irons

Pb Free Solder Pots

Pb Free Solder Bars

Butane Soldering

Soldering Accessories

Solder (Wire)

Solder Paste and Flux

Soldering Tips

Desoldering Tools

Desoldering Tips

SMT Rework Stations

Heat Guns

Vacuum Pickup Tools

Micro Hot Tweezers

PC Board Holders

Dispensing Systems

Capacitor Wizard

Hot Glue Guns

Digital Multimeter

3Ghz RF Probes

Heat Guns

Manuals

Price Lists

Brochures

Sites of Interest

Video Clips

Company Profile

Security

AM-1ATP REWORK STATION by JBC
The AM-1ATP is a package put together by HEI at the request of many of our customers. Check out this package and many others from HEI. This is truly an Advanced Complete Rework station with many innovative features not found in any other rework station
Read 'Analyzing the AM-1ATP' by Jerry Howard | See AM-1A w/o Hot Tweezers | See the AM7000SMD Package

Discontinued Unit Please See the RMST-1A for Replacement

JBC AM-1ATP The most advanced SMD rework station in the world

AM-1ATP Complete Rework Station

Click on Image for Larger Image

AM-1ATP
Save $129.50 from items purchased separately.
Includes AM-1A with all accessories and items shown below.
1 - PA-A micro hot tweezers
2 - PA-SA stand
3 - Set of cartridges for hot tweezers (2 x C120-002)
4 - 10cc syringe of No Clean solder paste
5 - 10cc syringe of No-Clean flux
6 - 460 tip cleaner.

View Cartridges (Tips) for T245-A Handpiece
View Cartridges (Tips) for T210-A Handpiece
View Cartridges (Tips) for PA-A Microtweezers

Recommended for use with the AM6850TP:
- C 245-009, C245-010 and/or C245-031, C245-038
- HT-A Hot Tweezers
- Micro Tweezers Cartridges
- Hot Tweezers Cartridges

Go to the JBC AM -1A without the Hot Micro Tweezers

Top 10 Reasons to Buy JBC

AM-1ATP is a SMD Rework Station for rework and repair of through-hole and SMT boards. It contains 4 modules which cover the main rework tasks.

Hot air for desoldering any size of SMD components. The station uses the exclusive JBC system, based on protectors-extractors (See image at bottom of page) and hot-air flow, which makes desoldering clean and quick, concentrating the heat on the IC, and protecting the rest of the circuit at the same time.
A medium-sized SMD can be desoldered in less than 20 seconds. When the IC is at desoldering temperature the extractor snaps the IC upward so fast that the leads are almost completely devoid of solder. This makes replacement of the same IC very easy if you wish.

Desoldering SMTs, through hole components and cleaning of through-hole components and pads by using the desoldering iron DR-A, which contains an independent vacuum pump.

Pick & Place vacuum pen to aid in positioning components.

Soldering of all types of components, with the swift response, power and temperature recovery of the Advanced series. You can connect the Advanced 2010, C210, 2045 or C245 handpieces or PA-A Microtweezers and HT-A Hot Tweezers to the AM-1A.

The station is easily controllable thanks to the precise information display. All of the functions of the console AC 2600 have an integrated password that allows you to adapt maximum functions for each user.

Apart from the standard setup as shown, any of the Advanced tools can be connected to both the soldering and desoldering modules; handpieces, desoldering iron, desoldering tweezers or solder feed iron.

In doing so, tools can be combined to set up the station to suit any specific task. The only limitation is that only one desoldering iron can be connected to the station.

Read Customer Testimonials

See the available Nozzles, Shields and Tripods for the AM-1A

SPECIFICATIONS:
	Power 1150 W
	Maximum power soldering iron 50 W
	Maximum power desoldering iron 75 W
	Power heating unit 1000W
	Temperature selection soldering iron: 90 - 450ºC (190 - 840ºF)
	Temperature selection desoldering iron: 90 - 450ºC (190 - 840ºF)
	Temperature selection hot air: 150 - 450 ºC (200 - 850ºF)
	Air flow regulation: 6 - 45 l/min
	Vacuum pump for holding ICs
	Antistatic control box with “skin effect”
	Weight of complete system 17,6 kg (44 Lbs)

Click here to see the repair process

AM-1ATP INCLUDES:
	Control unit with air heater 1150W
	Handpiece T 245 with the cartridge C245-003
	Desoldering iron DR-A with the tip C560-003
	Pick & Place MP 2260
	Extractor stand with: 5 extractors, 5 protectors and 2 tripods.
	Stands for soldering iron, desoldering iron and heater.
	Set of accessories. Click here for list
	PA-A Micro Hot Tweezers
	Cartridges for PA-A (C120-001 x 2)
	PA-SA Stand for PA-A
	No-Clean Solder paste (10cc Syringe)
	No-Clean Flux (10cc Syringe)
	460 Tip Cleaner
Optional Items for the AM-1ATP:
	HT-A Hot Tweezers
	Cartridges for HT-A
	SC4945 Cartridge Stand for holding 12 cartridges
	T210 Small Handpiece for fine SMD work
	Cartridges for T210 Handpiece

JBC JT-A Wand and Accessories

Click for large image	JT-A 900 Watt Wand $300.00

Click for large image	0007565 900 Watt heating element for JT-A Wand $205.00

FOLLOW THIS PROCESS INVERTED TO RE-CONNECT THE HEATER.
This step has to be performed when the heater is cold.
1. Un-tighten screw.
2. Separate the heating element from the heater’s cable.
3. Connect the new heating element, pushing it’s extreme.
4. Insert screw to avoid air-loss which could reduce the heating element’s lifetime.

hot air protector and tripod for ic extraction

surface mount extractor with hot air and vacuum

Process to desolder an IC with a AM-1A station
Click here to see the repair process	1. Fix the extractor 2. Hot-air melts the solder 3. IC is removed automatically 4. IC is virtually clean of solder
Time needed to desolder a medium - sized IC using this process: 20 seconds


MANUAL	EXPLODED VIEW		ELECTRICAL WIRING DIAGRAM		RANGE OF PROTECTORS AND EXTRACTORS	RANGE OF CARTRIDGES
SIZE: 1.694.914 Bytes	120 V SIZE: 670.269 Bytes	230 V SIZE: 976.744 Bytes	120 V SIZE: 142.413 Bytes	230 V SIZE: 211.791 Bytes	SIZE: 67.327 Bytes	SIZE: 49.590 Bytes

Howard Electronic Instruments, Inc. Address and Information

Howard Electronic Instruments, Inc.
974 SE Pioneer Rd
El Dorado, KS 67042
1-800-394-1984 Toll Free (USA and Canada)
316-321-2800 Local
01-316-321-2800 International Phone
316-223-3111 NEW Fax Number