Howard Electronic Instruments Soldering and Desoldering
Xytronic Soldering & Desoldering Station
Buy of the Year
Heat Gun Kit
AM-1A Complete Rework Station
Read Customer Testimonial
AM-1A Includes all accessories
View Cartridges for C245 Handpiece
View Cartridges for C210 Handpiece
View Cartridges for PA-1A Microtweezers
for use with the AM-1A:
PA-1A Micro Hot Tweezers
- HT-SA Stand for Tweezers
Micro Tweezers Cartridges
micro hot tweezers
for a Complete Rework Station.
Reasons to Buy JBC
|SMD Rework Station for rework and repair of
through-hole and SMT boards.
It contains 4 modules which cover the main rework tasks.
Optional Micro Hot Tweezers and Standard Hot Tweezers are
available with numerous cartridges. Standard
Hot tweezers can also be used for wire stripping.
Hot air for desoldering any size of SMD components.
The station uses the exclusive JBC system, based on protectors-extractors (See
image at bottom of page)
and hot-air flow, which makes desoldering clean and quick, concentrating
the heat on the IC, and protecting the rest of the circuit at the same
A medium-sized SMD can be desoldered in less than 20 seconds.
When the IC is at desoldering temperature the extractor snaps the IC
upward so fast that the leads are almost completely devoid of solder. This
makes replacement of the same IC very easy if you wish.
Desoldering SMTs, through hole components and cleaning of through-hole components and pads by using
the desoldering iron DR-A, which contains an independent vacuum pump.
Pick & Place
to aid in positioning components.
Soldering of all types of components, with the swift response, power and
temperature recovery of the Advanced series. You can connect the Advanced
C045 or C245 handpieces or
PA-1A Microtweezers and
HT-A Hot Tweezers to the
The station is easily controllable thanks to the precise information
display. All of the functions of the console AC 2600 have an integrated
password that allows you to adapt maximum functions for each user.
Apart from the standard setup as shown, any of the Advanced tools can be
connected to both the soldering and desoldering modules; handpieces,
desoldering iron, desoldering tweezers or solder feed iron.
In doing so, tools can be combined to set up the station to suit any
specific task. The only limitation is that only one desoldering iron can
be connected to the station.
Process to desolder an IC with
an AM-1A or JT7750
Click here to see the repair process
|1. Fix the extractor
2. Hot-air melts the solder
3. IC is removed automatically
4. IC is virtually clean of solder
Time needed to desolder a medium - sized IC
using this process: 20 seconds
here to see the repair process
Howard Electronic Instruments, Inc. Address and Information
Copyright © 1996 - 2013 Howard Electronic Instruments, Inc. All rights reserved.
Current date CST:
Print this page
Cross Reference guide
NA Nano Station
NA Nano Station
Hot Air Stations