soldering stations, desoldering stations, smd rework stations, microscopes, heat guns, and all accessories can be purchased at HEI at discount prices.
Search help            Advanced Search
Your Soldering, Desoldering and
Surface Mount Device
On-Line Store
Your Shopping Cart at Howard Electronic Instruments, Inc. Cart | Log In at Howard Electronic Instruments, Inc. Log-In | Register at Howard Electronic Instruments, Inc. Register Instant help Call 800-394-1984

JBC Tools Soldering, Desoldering, Micro Tweezers, Solder Feed, Rework Stations sold by Howard Electronics

JBC RMST / RMVT Rework Station

The soldering control units feature large high-contrast graphic displays that show important information at a glance.

Station for rework and repair of through-hole and SMT boards.
JBC RMST Rework Station
Lead-Free Rework Station
The Fastest Recovery Time of any Station in Production

JBC Tools RMST Complete Rework Station

RMST-1B with MS-A Electric Pump

 
RMST-1B $3424.00 
Reg. $
3950.00


RMVT-1B with MV-A Compress Air Pump

 
 RMVT-1B $3424.00
Reg. $
3950.00

 
The intelligent sleep and hibernation functions, which help to extend tip life and to save energy, are combined with extremely fast temperature recovery unrivalled in the market.
Hot air to desolder any size of SMD component. The station uses the exclusive JBC system, based on protectors-extractors and hot-air flow, which makes desoldering safe, clean and quick, concentrating the heat on the IC, and protecting the rest of the circuit at the same time.

Desoldering SMTs and cleaning through-hole components, and pads by using the desoldering iron DR-A. The unit features a self-contained vacuum pump.  Pick & Place pencil by suction to aid components positioning.

Soldering and desoldering of all types of components, with the quick response, high power and superb temperature recovery of the JBC Series.

SPECIFICATIONS:
• Nominal power: 2 X 75W
• Maximum peak power: 2 x 140W
• Sleep mode 2 X 10 W
• Hibernation mode 2 X 6 W
• Air flow regulation: 6 - 45 l/min
• Vacuum pump for holding ICs
• Maximum power: 1000W
• Temperature selection: ºC-ºF
• Temperature room: 450ºC -"cool"
• This system is protected against antistatic discharge
• Weight: 13Kg

    RMST-1A with MS-A Electric Pump

  • Control unit DD-1B
  • Control unit JT-1A
  • T245-A handpiece
  • C245-903 and C245-906 cartridges
  • DR desoldering iron
  • C560-004, C560-005 and C560-013 tip
  • AD-SB Stand
  • JT-SB Stand
  • DR-SB Stand
  • MS-A Suction module electric system
  • Heater 1000W
  • Extractor stand with 5 extractors, 5 protectors and 2 tripods

    RMVT-1A with MV-A Compress Air Pump

  • Control unit DD-1B
  • Control unit JT-1A
  • T245-A handpiece
  • C245-903 and C245-906 cartridges
  • DR desoldering iron
  • C560-004, C560-005 and C560-013 tip
  • AD-SB Stand
  • JT-SB Stand
  • DR-SB Stand
  • MV-A Suction module pneumatic system
  • Heater 1000W
  • Extractor stand with 5 extractors, 5 protectors and 2 tripods

We Guarantee the Lowest Prices!
Find a Better price on anything and we'll beat it. Call Now: 800-394-1984
We do our best to offer you the lowest prices on all of our products. If you find a better price on an identical item, we will beat it by 10% of the difference. Just give us a call. Or, place your order on our site at our existing price, send us an email with a link to the lower priced site and your order number and we'll refund the difference, plus 10%, back to your card! The item must be in-stock at the other location to get this discount!

Howard Electronic Instruments, Inc.
974 SE Pioneer Rd
El Dorado, KS 67042
1-800-394-1984 Toll Free (USA and Canada)
316-321-2800 Local
01-316-321-2800 International Phone
316-223-3111 NEW Fax Number
Solution Graphics

HACKER SAFE certified sites prevent over 99.9% of hacker crime.
 
Copyright 1996 - 2014 Howard Electronic Instruments, Inc. All rights reserved.
Current date CST: 10/31/2014