|
RMST / RMVT Rework Station |
|
New 2011 |
 |
|
|
|
JBC
RMST / RMVT Rework Station
Hot
air to desolder any
size of SMD component. The station uses the
exclusive JBC system, based on protectors-extractors
and hot-air flow, which makes desoldering safe,
clean and quick, concentrating the heat on the IC,
and protecting the rest of the circuit at the same
time
|
|
|
|
AM7000SMD Rework Station |
 |
|
JBC
AM7000SMD Rework Station
The
JBC AM7000SMD covers the trials and tribulations of
removing and replacing SMD or SMT components. It can
be operated by anyone and does not require any
training except for reading and understanding the
manual. This tool is for those who want the best the
electronics market has to offer with a minimum
required amount of workspace. |
|
|
|
|
|
|
|
|
|
|
|
|
|
NAST
-1A Nano Station |
|
 |
JBC NAST-1A
Soldering and desoldering chip components
NAST-1A is a complete station, designed for soldering
the tiniest components, like chips 01005 or 0201.
|
|
|
|
|
|
|
|
PA Micro
Tweezers Station |
|
 |
JBC PA-1A
Station with PA-1A Microtweezers
The PA-1A station is designed for fine pitch rework that allows operation with
the PA-A micro tweezers. |
|
| |
|
DDTP245
Digital Dual Soldering Station |
|
 |
JBC
DDTP245
Dual Station with PA-A
Microtweezers and T245 Soldering Iron
This Digital Dual
Soldering Station allows you to use the T245
soldering handpiece and the PA-A tweezers at the
same time. |
|
|
|
PH-1A Infrared Preheater |
 |
|
JBC
PH-1A
Infrared Preheater
The
PH heats the PCBs from below allowing
handsoldering to be completed much
faster and at lower soldering tip
temperatures. As a result solder tip
life is increased and there is a reduced
risk of thermal stress on components and
PCBs. |
|
|
|
|
|
|
|
DI3000TP Dual Soldering
Station |
 |
|
JBC
DI3000TP Dual Station with
PA-A Microtweezers and T245 Soldering Iron
The DI3000TP station is designed for
repetitive soldering and removal and replacement of
chip components |
|
|
|
|
|
|
|
