LOW-TEMPERATURE SOLDERING (Even with Lead-Free Solder)
Thanks to its recovery ability, you can now
work with much lower temperatures than before, which eliminates the risk of
damaging the circuit, the components, or the PC board traces through
excessive heating.
THE SMALLEST AND LIGHTEST ON THE MARKET
The Advanced series soldering handpieces have
the lowest weight and size you can find, and the shortest tip-to-handle
distance in their class (2210 = 25mm) ( 2245 = 38mm)
Micro Hot Tweezers
Designed to perform soldering and desoldering on SMD
components, from micro-components up to medium sized ones.
Each cartridge is individually controlled by the microprocessor located
inside the control unit, ensuring fast heat-up, accuracy and recovery. The
range of cartridges available allows desoldering of the smallest sized
components.
ALWAYS READY
When the soldering iron is left in its stand, the system reduces the tip
temperature to prevent the solder oxidizing - this way the tip is always
tinned, and lasts 5 times as long.
TWO-IN-ONE
Any of the Advanced models will give you two
soldering irons in one. Their instant heat response will enable you to
switch cartridge models and continue soldering in less than 10 seconds
thereby substantially increasing productivity.
See how it is done -
See Video
NEW SOFTWARE
With the new DI3000TP you can set the parameters to only allow the operator a
maximum adjustment of ±99°F (50°C)? This is now incorporated into the
software of the DI3000TP along with other features that a supervisor will
appreciate.
Sleep mode, Hibernation mode, lock out of parameters by PIN, are all
included in this highly competitive digital soldering station.
Hibernation Mode
The new DI3000TP now has a hibernation mode
whereas the tip power will shut completely off when the unit enters into the
hibernation mode. The DI3000TP can be set to go into the hibernation mode
between 0 and 60 minutes. This feature can not only save tips, it also
protects against potential fire hazards. Once a tool
is picked up, it returns to working temperature within seconds.
Temperature range (Min-Max)
The operator can select any temperature within the range defined in the
set-up mode by a supervisor. If ºTmin and ºTmax are the
same, the temperature is locked.
Lock
Keyboard Mode
It activates or deactivates the station’s keyboard except
when in SETUP mode.
Password
A password ensures controllability of
all the settings in setup mode.
Lunch Mode
Have you ever seen a soldering station that will shut off for lunch
when you place the handpiece in the proper place in the stand (See Image
at lower left of Page), and be ready in 2 seconds by lifting the handpiece
from the stand when you return from lunch? This also applies if you are
only using the solder station intermittently as a technician would. |