JBC Tools RMSE-1QE Complete Rework Station with Electric Pump. The JBC Tools RMSE-1QE Rework Station is the quickest and safest solution for soldering and rework, also using Hot Air.
JBC Tools RMSE-1QE Rework Station with Electric Pump
JBC Tools RMSE-1QE consists of stackable modules and all the necessary accessories to make your job easier. It works with the JBC exclusive heating system and the intelligent sleep & hibernation modes. The JBC Tools RMSE-1QE Rework Station features all the Excellence range benefits and the JT-SE Stand that guarantees the Auto-stop function when the heater is at rest.
RMSE-1QE JBC Tools Rework Station with Electric Pump
The JBC Tools RMSE-1QE Rework Station works simultaneously with the DR560 Desoldering Iron, the T245 Handle and the JT-TA Heater Hose Set and is compatible with most JBC Tools.
JBC Tools RMSE-1QE Rework Station Includes
Control Unit: JTSE Hot Air, DDE , MSE-A Electric Pump
Tools: T245-A General Purpose Handle , DR560-A Desoldering Iron, JT-TA Heater Hose Sets
Stands: AD-SE, DR-SE, JT-SE
Cartridges: C560003, C560004, C560005, C560013
Cleaning Systems: CL8499 Manual Tip Cleaner
Accessories: JN2020 Nozzle for JT heater, JN2015 Nozzle for JT heater, JN2012 Nozzle for JT heater, Extractor Desk, T260-A Pick & Place, PH218 Thermocouple Type K, PH217 Kapton Tape, SCH-A Cartridge Holder
JBC Tools RMSE-1QE Rework Station Specifications
Voltage 120 V
Input Fuse DDE:4A
Output Peak Power DDE: 150 W per tool
Nominal Power JT: 700 Watt
Temperature selection JT: 150-450ºC (300-840ºF) or Cool mode: Temp Off
DDE: 90-450 ºC (190-840 ºF)
Idle Temp. Stability (still air) DDE: ± 1.5 ºC (± 3 ºF)
Ambient operating temp. 10-40 ºC (50-104 ºF)
Air Flow Regulation JT: 10-50 SLPM
Flow rate MSE: 9 SLPM
Vacuum JT: 30% / 228 mmHg / 9 inHg
MSE:75%/570 mmHg/22.4 inHg
Rated current JT: 6A/ 3A / 7A
Tip to ground resistance DDE: <2 ohms
Tip to ground voltage DDE: <2 mV RMS
Communication connectors JT: USB-B
DDE:USB-A/USB-B/Peripherals
Robot connector DDE: RJ12 for RS-232 protocol
Pedal connection JT and MSE: P-005 Pedal
ESD Safe
Package weight 16.6 kg (36.5 lb)
Package dimensions 480 x 375 x 390 mm
Purchase a JBC Tools RMSE-1QE Complete Rework Station with Electric Pump sold by Howard Electronics Today!
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, MG Chemicals, Pana Vise, Qualitek, Steinel, Scienscope, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.
Customers Also Purchased
