Steinel HG2520E Programmable Heat Gun with LCD Display and Case sold by Howard Electronics
Steinel HG2520E Programmable Heat Gun is designed for use on electronic components to prevent potential damage from electrostatic discharge.The Steinel HG2520E heat gun temperature can be varied by toggle with one hand in 10 °F steps and read from the clear LCD information display at any time.
Steinel HG2520E Programmable Heat Gun with Case
Steinel HG2520E heat gun strongest pistol grip hot air tool is equipped with a powerful and extremely durable brushless motor that produces hot air up to 3,000 Pa with absolute precision. The Steinel HG2520E heat gun temperature can be varied by toggle with one hand in 10 °F steps and read from the clear LCD information display at any time. It's just as easy to adjust the airflow rate between 2-13 cfm and select any of the four individually tailored programs. Steinel HG2520E heat gun weight in at a mere 1.85 lbs, this professional hot air tool is perfect for construction site use and uses professional standard nozzles.
Steinel HG2520E Heat Gun Technical Specs
| Output: | 1750 W |
| Amps: | 14.8 A |
| Temperature: | 120 - 1300 ˚F (50 - 700 ˚C) |
| Airflow rate: | 2 - 13 cfm (+/- 0.5 cfm) |
| Air pressure: | 3,000 Pa |
| Motor: | brushless |
| Motor life: | 10,000 hours |
| Temperature setting: | on display, in 10 ¡ÆF steps by toggle |
| Heating element: | ceramic heating element |
| Lockable Override Control (LOC): | yes |
| Create Preset Customizable Programs: | yes |
| Thermal cutout: | yes |
| Double Insulated: | yes |
| Power Cord: | Industrial grade rubber |
| Nozzle Diameter: | 1.26” (32.00 mm) |
| Dimensions (l x w x h): | 11.20” x 3.80” x 8.20” |
| Voltage: | 120 VAC, 50/60 Hz |
| Weight: | 1.85 lbs (29.63 oz) |
| Warranty: | One year limited |
Purchase a Steinel HG2520E Programmable Heat Gun with LCD Display Today.
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, MG Chemicals, Pana Vise, Qualitek, Steinel, Scienscope, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.
