ThegootPOT-400C is especially
suitable for preparatory soldering of relatively large parts, solder-dipping
of large terminals, urethane wires, connectors, and big wire leads. The
POT-400C is a Cast Iron solder bath and is recommended for lead
free solder.
goot
POT- 400C
Temperature Controlled Lead Free
Soldering Pot for large processes with Cast Iron Solder Bath Large Image
POT- 400C
$4988.00
Compliant with ISO 9000 series.
Equivalent to IPC/EIA J-STD-001C
Features and Benefits: Perfect
Temperature: PID temperature control minimizes deviation of solder or setting
temperature. Dual
Display:
Dual digital temperature display shows set temperature and measured
temperature values at the same time. Extremely
Accurate: Extremely accurate setting value and measured value at very minimal
tolerance as {(display value x 1.25%)+1C} Cast
Iron Solder Bath: Recommended for lead free solder. Preparatory
Soldering: (Patent Pending)
Suitable for preparatory soldering of relatively large parts, solder-dipping
of large terminals, urethane wires, connectors, and big lead wires. Warning
Lamp: Warning lamp to detect any deviance from set temperature range. Separated
structure: Separated structureof solder bath and heater allow simple
replacement of each part.
•PID temperature control
minimizes deviation of solder or setting temperature. •Dual digital
temperature display shows set temperature and measured temperature values at
the same time. •Extremely accurate setting value and measured value at very
minimal tolerance as ±{(display valueX1.25%)+1°C}. •Warning lamp to detect
any deviance from set temperature range. •Sheathed Heater (POT-350C).
•Separated structure of solder bath and heater allow simple replacement of
each part. (POT-100C / 200C)
2
Setting digit shift key
•To change set value, move the
cursor to the digit to be changed.
3
Setting value decrement
key
•For decreasing value when changing
set value.
4
Setting
value increment key
•For increasing value when changing
set value.
5
Measured value (PV)
display panel (Green) •Displays
measured value(PV).
•Displays parameter symbol in setting mode
6
Setting Value(SV)
display panel (Orange)
•Displays set value(SV) •Indicates
set value of parameter symbol shown on (PV)
display panel in setting mode.
7
Control
Output Lamp (Green)
•Lights up when control output is
ON
8
Auto-tuning (AT) lamp
(Green)
•Flickers in auto-tuning mode.
9
Alarm (ALM) lamp (Red)
•Lights up when alarm is ON
1
Set (SET)
key •To register
set value
•To change modes and parameters
•To change PV, SV display mode or the parameters
setting mode
Howard Electronic Instruments, Inc. Address and Information
Howard Electronic Instruments, Inc.
974 SE Pioneer Rd
El Dorado, KS 67042 1-800-394-1984
Toll Free (USA and
Canada)
316-321-2800 Local
01-316-321-2800 International Phone
316-321-2803 Fax
POT- 400C
"Lead Free"
Solder Pot 
