|
EDSYN 1036DX
Loner Atomoscope
Self-Contain SMT Deluxe Hot Air Station |
|
A versatile and complete SMT hot air
station that adjusts to
either hot air or contact soldering techniques from the same station |
|
Click for larger image |
-
Utilizes unique hot air tips for easier
rework on Gullwings, J-Leads, PLCC's and small outline components
-
Uses LONER general purpose soldering tips for
through-hole rework
-
Small hand tool is light and easy to maneuver
-
Air control valve allows precise airflow
-
LP250 vacuum puck-up tool included
-
Electronic circuitry provides fast heat up
and improved temperature stability
Our Price
$1599.08
for 5% discount |
Specifications for Model 1036DX
Power Requirements
Power Rating
Heater Rating |
120V, 60Hz
85W - 230W
24V, 53W |
| Temperature Range |
400ºF-800ºF/205ºC-427ºC |
| Temperature Regulation |
±6ºF/±3ºC |
Tip to Ground Voltage
Leakage/Resistance |
<2mv/<2 ohms |
| Overall Dimension |
4.1"W x 8.5"H x 9"D
104mm x 216mm x 229mm |
Weight
Power Supply
Hand Tool
Pick-Up Tool |
4.6 lbs/2.1kg
3oz/85g
1oz/28g |
|
Contents
1036DX
PD533
LP250
PD532
SH230
HC273
WT620
WT623
WT624
ST800
WP556 |
Self Contained
SMD Deluxe hot air station (Includes LU26 hot air tip and LT375
Soldering Tip)
Tool pod for hot air tool
Pick up tool for SMD components
Tool holder for pick-up tool
Sponge holder with LN230 liner
RS199 cleaning sponge and RS243 pad
Threaded Retaining Collar for soldering tip
Tip wrench, 1/4" socked
Tip wrench, Dual open end, 1/4" & 3/4"
Tip wrench, Dual open end, 1/4" & 5/16"
SMD helper (Includes RB642 shim blade, WS630 pull wire)
WIGAPRY Low Static Computer aid |
|
|
Applications for LONER ATMOSCOPE SMT
Rework Stations |
 |
 |
|
Precise Calibration
of hot air is achieved with the SDS100 Sensor Docking System
and TPL09 Sensor Locator. This system also calibrates other soldering
stations and can store in memory up to four tip temperatures and tip styles.
Once calibrated, there is no need to recalibrate between tip changes. |
SMT Rework is Quick and
Clean. The LT428 hot air tip is the standard tip
installed on the 1036, 1032, 971HA and MCS100HA. Using nitrogen instead of
shop air reduces oxidation and leaves cleaner solder joints. |
|
|
 |
 |
| Direct Contact Rework Tips
can be used on the 1036DX, 1036, 1032, and MCS100HA. This is possible by
changing collars and selecting the best CROWN tip for the hob at hand. Use
CROWN tips on four sided components like PLCC's and QFP's. |
Non-Contact Rework is
achieved by using an LT572 or LU572 dual flow adjustable tip. These tips
have hot air directed to the leads not the component. The LT572 tip
application can be used on the 1036, 1032, 971HA and MCS100HA. The LU572 tip
can be used on the 1036DX. Both tips are bendable to taylor fit a wide
variety of component sizes. |
