|
JBC
AM6850SMD
SMD Rework Station
The most advanced SMD rework station in the world
Fast, Efficient, Productive, Effective, User
friendly
Read (Analyzing the AM6850 |
See
the AM6850TP w/hot tweezers |
AM6850 Only
|
JBC AM6850SMD
The most advanced SMD rework
station in the world |
|
 |
Purchase
the
AM6850SMD
as a Total Package
SMD Rework Station
and have the
Best of the
Best
Tech Note:
You will be totally amazed, like all of our
customers, at how effortless changing Surface Mount Devices can
be. With this package, I would recommend a quality Stereo Zoom
Microscope. It will not only give you a detailed view while
replacing the SMD, but will allow you to totally inspect and
admire your masterpiece.
Lowest price when purchased as a package.
AM6850SMD$0.00
AM6850SMDTP
$0.00
with
HEI-MP4-FR
Stereo Zoom Microscope
(Perfect for this
application)
Watch
Short Video Clips on JBC Tools |
SMD Rework Station for rework and
repair of through-hole and SMT boards.
It contains 6 modules which cover the all of the main rework
tasks.
Hot air for desoldering any
size of SMD components. The station uses
the exclusive JBC system, based on protectors-extractors (See
image at bottom of page)
and hot-air flow, which makes
desoldering clean and quick, concentrating the heat on the IC,
and protecting the rest of the circuit at the same time.
A medium-sized SMD can be desoldered in less than 20 seconds.
When the IC is at desoldering temperature the extractor snaps
the IC upward so fast that the leads are almost completely
devoid of solder. This makes replacement of the same IC very
easy if you wish.
Desoldering SMTs, through
hole components and cleaning of through-hole components and pads
by using the desoldering iron
DR 5600, which
contains an independent vacuum pump.
Pick & Place vacuum
pen to aid in positioning
components.
Soldering of
all types of components, with the swift response, power and
temperature recovery of the
Advanced series. You
can connect the Advanced
2210, or 2245
handpieces or
PA1200 Microtweezers and
PA4200 Hot Tweezers
to the AM6850.
Hot Tweezers The
PA1200 Microtweezers,
stand, and
1200-002 tweezers
cartridges come with the unit, which is controlled by a Dual
Digital Soldering Station (DI3000)
along with the 2210
handpiece, stand, and
2210-009
cartridge.
The station is easily controllable thanks to the precise
information display. All of the functions of the console
AC 2600 have an
integrated password that allows you to adapt maximum
functions for each user.
Apart from the standard setup as shown, any of the
Advanced tools can be connected to both the soldering
and desoldering modules; handpieces, desoldering iron,
desoldering tweezers or solder feed iron.
In doing so, tools can be combined to set up the station
to suit any specific task. The only limitation is that
only one desoldering iron can be connected to the
station. |
|
| SPECIFICATIONS: |
 |
Power 1100 W |
|
|
Maximum power soldering iron 50 W |
|
|
Maximum power desoldering iron 75 W |
|
|
Power heating unit 1000W |
|
|
Temperature selection soldering iron:
90 - 450ºC (190 - 840ºF) |
|
|
Temperature selection desoldering
iron: 90 - 450ºC (190 - 840ºF) |
|
|
Temperature selection hot air: 150 -
455 ºC (200 - 850ºF) |
|
|
Air flow regulation: 6 - 45 l/min |
|
|
Vacuum pump for holding ICs |
|
|
Antistatic control box with “skin
effect” |
|
|
Weight of complete system 27.27kg (60
Lbs) |
Watch Short Video Clips on JBC Tools
 Click
here to see the repair process |
|
|
 |
 |
|
Process to desolder an IC with
an AM6850, JT7700or TE5400
|
|
Click here to see the repair
process |
1. Fix the
extractor
2. Hot-air melts the solder
3. IC is removed automatically
4. IC is virtually clean of solder |
Time needed to desolder a medium - sized IC
using this process: 20 seconds
JBC Shields, Nozzles, Tripods, Manual
Nozzles |
|
|
|
