Xytronic LF-8800K Soldering and Desoldeirng Station operates with the high power 32V/100W output that is specially designed for lead-free soldering and desoldering works to meet RoHS requirement.
Xytronic LF-8800K Soldering and Desoldering Station
Xytronic LF-8800K Soldering and Desoldering Station is built in a self-contained, oil free, maintenance free, and quiet running vacuum pump which is electronically controlled and will not overload with continuous use, eliminating the need for additional shop air. The LF-8800K vacuum pump provides up to 50cm/Hg (20in/Hg) suction power, activated by a push button switching circuit located on the desoldering wand. Internal solder collector in handpiece is quickly and easily removed for cleaning.
LF-8800K Xytronic Soldering and Desoldering Station Features
- Heater/Sensor Failed Detection: If sensor circuit fails, the heater power is shut down.
- Temperature “Lock-Out" feature: The temperature can be locked with a password code.
- ESD Safe and Spike Free circuitry: The “Zero Voltage" electronic switching design protects voltage and current sensitive components (CMOS devices, etc.) against damaging current and transient voltage spikes commonly produced by less efficient, mechanically switched stations.
- Delayed Suction: To eliminate the problem of solder clogging up the tip, a delayed switch feature has been incorporated for the unit that allows the pump to continue sucking for 1.5 seconds after the actuator switch is released.
- Energy Saver Mode: If the station is left idle for 20 minutes, the energy saver feature will automatically engage, resetting the temperature to 150°C from the previous setting.
- Iron Working Option: Both soldering, desoldering irons can be used at the same time.
- Optional SMD Tweezers: Specially designed for SMD chips, SOT, Flat pack IC's etc. reworking.
- Optional Hot Air Pencil (HAP 80): Removes SMD chips and flat packs up to 25mm.
LF-8800K Xytronic Soldering and Desoldering Station Ships With:
- Xytronic 307K Soldering Iron with 44-510601 tip
- Xytronic DIA100 Desoldering Iron with 44-915412 tip
- Xytronic 468ESD Fume Extractor
- 2 Iron Holders
- Set of 5 Stainless Steel Tweezers
- One pair of Xytronic Cutting Pliers
- AC Power Cord
- Operator Manual
Purchase Your Xytronic LF-8800K Soldering and Desoldering Station Today!
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, Pana Vise, Qualitek, Steinel, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.
No posts found