|
PanaVise Vise Heads
BACK
The following heads are compatible with the
300 Standard
Base, the 305 Low-Profile Base, and the
380 Vacuum Base.
A new or additional head will add extra productivity to your existing PanaVise, or start here to build your own! All stems at 5/8" (15.9mm) in
diameter. All our vises and work holding devices come with a
"lifetime
warranty."
Please Click the Image for larger view |
|
 |
PV Jr. Head - Model 203 $20.95
Perfect for at-home hobbyists and electronics enthusiasts.
Grooved jaws open to 2 7/8" (73mm). Jaws are 1" wide(25.4mm) and 2" tall
(50.8mm).
The stem is 1" (25.4mm) long and 5/8" (15.9mm) in diameter.
Overall height is 3 3/4" (95.2mm).
Neoprene Jaw Pads are available for holding extremely delicate items. |
|
|
 |
Standard Head - Model 303 $24.95
Jaws open to 2 1/4" (57.1mm). Jaws are 2 1/2" wide (63.5mm).
The stem is 2 1/8" (54mm) long and 5/8" (15.9mm) in diameter.
The Nylon Jaws have a satin finish to improve grip.
Steel, brass, Teflon®
and grooved nylon jaws are available as accessories for this head.
As a general purpose head, you can't go wrong with its exceptional strength
and quality. |
|
|
 |
Low-Profile Head - Model 304
$32.95
The Low-Profile Head has the same basic mechanical features as the 303
Standard Head, except that the stem is cast into the base of the head to
allow close positioning to the work surface.
When used with the 305 Low-Profile Base the head can be swung out and away
from the bench surface.
Jaws open to 2 1/4" (57.1mm). Jaws are 2 1/2" wide (63.5mm).
The stem is 1 5/8" (43.1mm) long and 5/8" (15.9mm) in diameter.
Steel jaws may be interchanged with any of the
accessory jaws.
Overall length is 7 3/4" (196.8mm). |
|
|
 |
Fixturing Head - Model 337
$18.95
The 337 Fixturing Head allows permanent fixturing for production line
assembly or repetitive repair. Work can be bolted to this head easily
because of its six slots and bolt holes.
The flat round surface is 5 3/8" (136.5mm) in diameter.
The steel stem is die cast into the aluminum head and is 2" (50.8mm) long
and 5/8" (15.9mm) in diameter.
Overall Height (stem to top of head) is 3 3/4" (95.2mm). |
|
 |
Wide Opening Head - Model 366
$33.95
This head is a versatile, general purpose electronics head created
especially for production lines, technicians, and designers.
Jaws open to 6" (152.4mm) to accommodate most PC boards in its molded,
deep-ribbed neoprene jaw pads. When pads are reversed, the wide "V" can be
used for securing delicate items, such as tuners, coils, motor armatures,
etc.
The jaw's control knob is micro-adjustable so it exerts the exact amount of
pressure you need.
The stem is 2 1/4" (57.1mm) long and 5/8" (15.9mm) in diameter.
Overall height is 5 1/8" (130.2mm). |
|
 |
Extra Wide Opening Head - Model 376
$45.95
The double action jaws on the 376 Self-Centering Extra Wide Opening Head
allow fast opening and closing.
The self-centering feature lets you hold heavier objects because the weight
is centered over the base.
Jaws open to 9" (228.6mm).
The jaw plates can be reversed to close together, and the reversible jaw
pads feature ribbing on one side and a deep "V" groove on the other.
The stem is 2 1/4" (57.1mm) long and 5/8" (15.9mm) in diameter.
Overall height is 5 1/4" (133.3mm). |
|
|
 |
Micrometer Head - Model 385
$21.95
Micrometer Holder gently, yet firmly holds micrometers of all sizes.
Neoprene pads open 1/2" (12.7mm).
Jaws also close to zero, for holding thin items such as micro sized circuit
boards.
Throat depth is 1" (25.4mm).
The stem is 1.4" (35.6mm) long and 5/8" (15.9mm) in diameter.
Overall height is 3.3" (83.8mm). |
|
|
Copyright © 1996 - 2007 Howard Electronic Instruments, Inc. All rights reserved.
Revised: 06/08/2007
|
|
|
Video Clips
Our Venders
JBC Tools
Xytronic
DEN-ON
Goot
EDSYN
Weller
HEI Scope
Steinel
Jensen Global
Master Appliance
Panavise
Chip Quik
PDR
Quatro
AMTECH
Virtual Industries
Auburn Tech
Kahnetics
SSL Certificates
Currency
Converter |