|
PanaVise Circuit Board Holders
BACK
Printable
page
PanaVise Circuit Board Holders
help you work quicker and smarter. The two moveable arms extend 6" (154mm)
from the cross bar and have "V" shaped grooves which securely hold the board
edge. One arm is spring tensioned to equalize holding pressure, and includes
a new lever which locks the internal spring "open" for quick board insertion
and removal. "V" notches positioned laterally near the arm tips securely and
conveniently hold small electronic parts. All our vises and work holding
devices come with a
"LIFETIME WARRANTY." Please Click the Image for
larger view |
|
 |
Circuit Board Holder - Model 315 $32.95
Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm)
thick. Arms move independently.
Add the 318 Accessory Cross Bars and the bar width can be extended from 14"
(355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide.
Arms move independently and may be positioned adjacent to each other.
Additional sets of arms (Model 316) are available for dual or multiple board
use.
Ratcheted pivot for added adjustability, holds board horizontally,
vertically or any angle in between.
The stem is 5/8" (15.9mm) in diameter and fits all
300 Series Bases.
Overall height (including stem) is 10 7/8" (276.2mm) |
|
|
 |
Electronic Work Center - Model 324
$81.95
The PanaVise Electronic Work Center is a complete and economical work bench
combination.
It delivers a set of circuit board holders, all the "tilt, turn and rotate"
control of a 300 Standard Base, the convenience of a
312 Tray Base Mount and
a 371 Solder Station.
Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm)
thick. Arms move independently.
Add the 318 Accessory Cross Bars and the bar width can be extended from 14"
(355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide.
Arms move independently and may be positioned adjacent to each other.
Additional sets of arms (Model 316) are available for dual or multiple board
use.
All parts, tooling, wire, soldering iron and PC Boards are located exactly
where you want them. Sturdy and stable.
The 324 Electronic Work Center stands 13 1/2" (342.9mm) tall and weighs
4lbs. 8oz. (2kg). |
|
|
 |
Rapid Assembly Circuit Board Holder - Model 333
$71.95
The PanaVise Rapid Assembly Circuit Board Holder features eight position
rotating adjustment, six positive lock positions in the vertical plane and
height adjustment for quick board rotation speeds and component insertion
and soldering.
Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm)
thick. Arms move independently.
Add the 318 Accessory Cross Bars and the bar width can be extended from 14"
(355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide.
Arms move independently and may be positioned adjacent to each other.
Additional sets of arms (Model 316) are available for dual or multiple board
use.
Weighted base is extremely stable.
Weighs 6lbs. 7oz. (2.9kgs). Height from base to top of vertical shaft is 10"
(254mm). |
|
|
Copyright © 1996 - 2007 Howard Electronic Instruments, Inc. All rights reserved.
Revised: 06/08/2007
|
|
|
Video Clips
Our Venders
JBC Tools
Xytronic
DEN-ON
Goot
EDSYN
Weller
HEI Scope
Steinel
Jensen Global
Master Appliance
Panavise
Chip Quik
PDR
Quatro
AMTECH
Virtual Industries
Auburn Tech
Kahnetics
SSL Certificates
Currency
Converter |