Neoprene Pads (pair) - Model 204
$3.45
The neoprene jaw pads slip over the ends of the model
201 PV Jr. or 203 PV
Jr. Head.
Soft, gentle with plenty of holding power
Extra Circuit Board Arms (pair) - Model 316
$19.95
Add extra arms for multi circuit board work to any
PanaVise Circuit Board
Holder.
Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm)
thick.
"V" notches positioned laterally near the arm tips securely and conveniently
hold small electronic parts.
Extra Width Circuit Board Cross Bars
Model 318-14 $5.95
Model 318-18 $6.95
Model 318-22 $7.95
Model 318-26 $8.95
Model 318-30 $9.95
Add a longer Circuit Board Cross Bars to any
PanaVise Circuit Board Holder
to hold wider circuit boards or for multi circuit board work.
These longer bars are available in 4" (101.6mm) increments from 14"
(355.6mm) to 30" (762mm).
Circuit Board Holder Replacement Knob Set
Model 319 $4.49
Replacement Knob set for all Circuit Board Holder Arms.
Nylon Jaws (pair) - Model 343
$2.95
The 343 Nylon jaws offer excellent electrical insulation and gentle holding
power.
Made of type 66 nylon.
Will withstand intermittent heat to 300°F (149°C), or a continuous 200°F
(93°C).
Included standard on the 303 Standard Head.
Grooved Nylon Jaws (pair) - Model 344
$3.95
The 344 Grooved Nylon jaws are similar to the 343 Nylon Jaws except that
they have a small horizontal groove running the width of the jaws.
Perfect for holding small tubes, rods, and small circuit boards firmly in
place.
Neoprene Jaw Pads (pair) - Model 346
$2.95
The reversible 346 Neoprene Jaw Pads are used with the
366 Wide Opening Head
and the 376 Self-Centering Head.
These thick, molded pads have a corrugated surface on one side to firmly
hold the most delicate items.
Flip the pads around and use the wide "V" to hold round objects.
Telfon Jaws (pair) - Model 352
$11.95
The model 352 Teflon® High Heat jaws won't scratch or mar delicate pieces.
Specifically designed for high heat environments up to 500°F (260°C).
Plated Steel Jaws (pair) - Model 353
$9.95
The model 353 Plated Steel jaws are recommended when working with high heat
or heavy objects.
Included standard on the 304 Low-Profile Head.
Brass Jaws (pair) - Model 354
$10.95
The model 354 Brass jaws are non-marring alternative to the 353 Steel Jaws
for heavy or high heat applications.
Prefect for Jewelry making.
Wire Manager - Model 358 $21.95
The Wire Manager is a handy time-saver that helps organize your task when
working with multiple wire leads.
The tempered coil spring is also a convenient place to keep small tools
close at hand.
Pivots away from the jaws when not in use.
Slides onto the end of a 366 Wide Opening Head or
376 Extra Wide Opening
Head.
Solder Station - Model 371
$16.95
The Solder Station is a combination soldering iron holder and
controlled-feed holder for standard spools of solder and wire.
Two nib sponges with self-purging slits are included.
The station attaches to the 312 Tray Base Mount or to the
308 Weighted Base
Mount. It may also be used as freestanding unit and is easily attached to a
bench or wall.
Vacuum Base Repair Kit - Model 380-RK
$14.95
Replacement for torn or damaged 380 Vacuum Base Pad.
Includes rubber pad, handle and lock washer.
Howard Electronic Instruments, Inc.
974 SE Pioneer Rd
El Dorado, KS 67042 1-800-394-1984
Toll Free (USA and
Canada)
316-321-2800 Local
01-316-321-2800 International Phone
316-321-2803 Fax
