PRODUCT FEATURES
1. TWO IN ONE: By design, saving working space, owning two functions, can greatly meet the users need. Soldering,and Hot Air.

4. HEATER/SENSOR FAILED DETECTION: If sensor circuit fails, the display reads "S--E" and cut off the heater power. If heater circuit fails, the display will read "H--E" and cut off the heater power.

5. TEMPERATURE “LOCK-OUT” FEATURE: The temperature can be locked by “password” code that is convenient for production line management.

6. ESD SAFE AND SPIKE FREE CIRCUITRY: The “Zero Voltage” electronic switching design also protects voltage and current sensitive components (CMOS devices, etc.) against damaging current and transient voltage spikes commonly produced by less efficient, mechanically switched stations.

7. LIGHTWEIGHT SOLDERING IRON: Ergonomic mini handle that stays cool and prevents operator fatigue

8. ENERGY SAVER MODE: If the station has been idle for 20 minutes, the energy saver feature will automatically engage, the temperature goes down to 150°C from the set temperature. Activating the soldering wand will disengage the power saving feature and the unit will immediately ramp up to the preset temperature. When over 40 minutes without operation the main power will be switched off to “sleep mode” which cuts power consumption and extends tip life.

Please note: You have to switch off the unit first and then switch “ON” again to commence work when the unit goes to “Sleep” mode.

9.  IRON WORKING OPTION: Both soldering, hot air tool can be used at the same time. You can also set by pressing keys.

---

Hot Air Funciton

1. HIGH POWER HEATING ELEMENT: Heats up quickly, the momentary power can reach 600W.

2. TEMPERATURE ADJUSTABLE: Suits for removing QFP, SOP, PLCC or SOJ chips etc., especially the built in static free circuit design is safety for the sensitive elements like CMOS ICs.

3. SENSOR /PUMP FAILED DETECTION: If sensor circuit failed that the display read “S--E” and cut off the heater power. If the pump circuit failed that the display read ”P-E” and cut off the heater power.
Auto-cooling design: When the power switch off, the cooling system will begin to work automatically, the temperature falls down to 100℃(212℉) to protect the heating element from burning ..

4. HEATING ELEMENT AUTO-PROTECTING FUNCTION: When heating element reaching a high temperature which can be protected automatically, to lasting the life of heating element.